Products 193-211 of 211
Show
Turtle: 2WD Arduino Mobile Robot Platform
OOD!
Price: $60.16
View
Availability: Back Order
DFRobot Item #: ROB0005 -

The 2WD Mobile Robot Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels (and rear caster ball), frame and all mounting hardware. The main structure and mechanical parts for a robot.This DFRobot mobile robot platform is widely used as self-developed control chasis for Arduino platforms and other control boards. This kit features the following: two differential drives, near...

USB Cable A-B for Arduino Uno/Mega
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: FIT0056 -

This is the most common A to B Male/Male type peripheral USB 2.0 cable for arduino. It is compatible with most Arduino boards such as Arduino Mega, Romeo, Arduino Duemilanove. Often used for printers and other peripherals. While still a little bulky in shape for small embedded systems, this is a standard cable found everywhere. Use this cable with Arduino UNO and others, but not for Arduino Leonardo based boards.May come in White or Black. Cable color and shape may vary.|ShippingList| USB...

USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
OOD!
Price: $20.60
View
Availability: Back Order
DFRobot Item #: DFR0164 -

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on some Windows systems installing the driver might be required. This driver comes with the Arduino IDE, in the root folder you can find a folder named drivers. The USB Serial Adapter has an onboard mini-USB connector and 5 pins including RX (for...

USBSerial Adapter
Price: $16.36
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCP00101P -

    This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware or communicating with MCU applications. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules. Features Reset button for BEE modules 3.3V and 5V dual power output 3.3V and 5V IO compatible USB 2.0 protocol...

USBtinyISP-Arduino bootloader programmer
OOD!
Price: $24.22
View
Availability: Back Order
DFRobot Item #: DFR0116 -

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. Both 10-pin and 6-pin targets supported (cable included) which makes the progrmmer suitable for most AVR boards.This programmer is based on USBtiny code & design Version 2.0The Kit...

VFD Tube (Arduino Compatible)
OOD!
Price: $56.71
View
Availability: Back Order
DFRobot Item #: DFR0223 -

VFD tube, vacuum fluorescent display, which was invented in Japan in 1967, typifies the display component of the vacuum electronic era. Just as the Nixie Tube, VFD tube is also on the verge of extinction. It has been fade out from modern applications since the 1990′s. Young generations may have never seen its limpid cyan fluorescence, given life by the intelligence of the last century. With the same concept of developing the Nixie Tube module for Arduino, in order to make the VFD tube...

Vortex - An Arduino Based Programmable Toy Robot For Kid
OOD!
Price: $222.38
View
Availability: Back Order
DFRobot Item #: ROB0129 -

Vortex , a programmable toy robot designed for kids. It is an Android or iphone controlled toy. There are 5 games that kids can play with together with fully customized personality and appearance through APP. Vortex is programmable. It is based on Arduino which allow it compatible with most Arduino programming language such as Scratch, Arduino IDE. If you are not familiar with Arduino, we have a visual programming APP named "WhenDo" to get started with. Vortex has 32 eye expressions and...

Vortex - An Arduino Based Programmable Toy Robot For Kid  (2 Pack)
OOD!
Price: $394.76
View
Availability: Back Order
DFRobot Item #: ROB0130 -

Vortex , a programmable robot designed for kids. Vortex is based on Arduino which allow it compatible with most Arduino programming language such as Scratch, Arduino IDE. If you are not familiar with Arduino, we have a visual programming APP named "WhenDo" to get started with. Vortex has 32 eye expressions and unlimited light effects, it has build-in mp3 player and allow you upload your own voice and mp3 files. Customize a vortex with personal eyes expressions and appearance is done by your...

W5200 Ethernet Shield
Price: $33.24
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-ACS52001S -

    The Ethernet Shield connects your Arduino device to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.     The Ethernet controller of this Ethernet Shield is W5200. it is twice the buffer size of W5100 and support for up to eight simultaneous TCP/UDP connections. There is an...

W5500 Ethernet with POE IOT Board (Arduino Compatible)
OOD!
Price: $77.40
View
Availability: Back Order
DFRobot Item #: DFR0342 -

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It enables users to have the Internet connectivity in their applications just by using the board in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. W5500 Ethernet Board is uses a high-efficiency...

WiDo - An Arduino Compatible IoT (internet of thing) Board
OOD!
Price: $51.54
View
Availability: Back Order
DFRobot Item #: DFR0321 -

|Specification| Power Supply range: 5v or 7-12v Arduino Leonardo Compatible Integrate with WG1300 WIFI chip and support 2.4GHz IEEE 802.11 b/g network WIFi and MicroSD driven by SPI port On board 2.4G PCB Antenna Driver pins WIFI Module-D7(IRQ),D5(VBAT),D10(CS),D14(MISO),D15(SCK),D16(MOSI) MicroSD-D4(CS),D14(MISO),D15(SCK),D16(MOSI) User friendly Reset button Dimension: 72 mm x 55 mm(2.83" x 2.17")|Documents| Wiki Doc Arduino library Schematic WiDo with Ubidots|ShippingList| WiDo x1 ...

WiFi Shield V2.2 for Arduino (802.11 b/g/n)
OOD!
Price: $131.10
View
Availability: Back Order
DFRobot Item #: TEL0047 -

DFRobot is very proud to release this first 802 b/g/n wifi shield in the Arduino market. The arduino shield uses WizFi210 which is a low power-consuming WIFI module which is applied with dynamic power management technology. When the WIFI module needs to be on but not work, it can be set to Standby mode a low power mode, and the module just needs to be woken up when it has to work.The WIFI wireless module is based on WizFi210. It provides the bridging from TTL serial port communication to...

WiFi Shield V3 For Arduino PCB Antenna (802.11b/g/n)
OOD!
Price: $84.55
View
Availability: Back Order
DFRobot Item #: TEL0078 -

DFRobot WiFi Shield, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connect the WIFI network (No AT command setup required, which is often very complex). This module uses dynamic power management to...

WiFi Shield V3 For Arduino RPSMA (802.11b/g/n)
OOD!
Price: $87.14
View
Availability: Back Order
DFRobot Item #: TEL0079 -

DFRobot WiFi Shield for Arduino, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connect the WIFI network (No AT command setup required, which is often very complex). This module uses dynamic power...

WiFiBee-MT7681 (Support Arduino WiFi Wireless Programming)
OOD!
Price: $25.69
View
Availability: Back Order
DFRobot Item #: TEL0107 -

The WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module. It is compatible with an XBee slot, supports Arduino wireless programming and is ideal for Internet of Things (IoT), home automation and robotics applications.The WiFi Bee supports the IEEE802.11b/g/n standard protocols, with 2.4G Wi-Fi bands, 14 channels and WEP/WPA-PSK/WPA2-PSK/TKIP/AES encryption methods, compatible with many mainstream routers. It has STA and AP working modes, is free to switch, and...

Wireless GamePad V2.0 for Arduino
OOD!
Price: $102.57
View
Availability: Back Order
DFRobot Item #: DFR0182 -

The Wireless Joystick v2 for Arduino is the first gamepad based on Arduino from DFRobot. It support Xbee, Bluetooth, RF and Wifi via the Xbee socket. Makes it possible to custom your own wireless communication for controlling your robots, mobile platforms, UAVs and etc.This gamepad supplies two analog sticks, one reset button and 16 programmable buttons, using PS2 style button layout, which allows you to completely customize your controlling experience. It runs on three "AAA" Batteries or a...

Xbee Shield
Price: $13.19
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCS01407S -

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial, port for easier prototyping. Features arduino main board compatible 3 indicator LED?ON/Sleep, RSSI, ASSOC?for XBee Full size with free drills Reset button for XBee and base board Provide maximal 500mA under 3.3V Full break out for XBee Full break out for the base board Package list XBee Shield PCBA...

XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
OOD!
Price: $34.30
View
Availability: Back Order
DFRobot Item #: DFR0162 -

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet connectivity to your projects. It's great for anything from home automation to robot control. The possibilities are endless! It has 8...

XSP - Arduino Programmer
OOD!
Price: $26.72
View
Availability: Back Order
DFRobot Item #: DFR0360 -

XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency. With this programmer, you can adjust its interface for your own device. Quite convenient and easy to use. It will be your good friend, when you coding and programming. It could work with eClip programming Fixture together....