Components + IC's + PCB's

Products 289-336 of 683
Show
Genuino 101
Price: $62.60
View
Availability: Back Order
Sparkfun Item #: DEV-13984 -

"The Genuino 101 is a learning and development board that delivers the performance and low-power consumption of the Intel® Curie module with the simplicity of Arduino at an entry-level price. This development platform keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth LE capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. The Intel® Curie module contains two tiny cores,...

Global Power Supply - 15V 4.34A
OOD!
Price: $66.86
View
Availability: Back Order
Sparkfun Item #: PRT-14338 -

"This isn’t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the JustBoom Amp HAT for the Raspberry Pi. Additionally, as this is a “global” power supply, each order includes plug adapters for the United States, United Kingdom, EU and Australia. This supply is capable of high loads, so we recommend that you exercise caution while using it. Features: Universal / Full-range AC input Power Supply Output Type:...

Graphic Equalizer Display Filter - MSGEQ7
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: COM-10468 -

"The seven band graphic equalizer IC is a CMOS chip that divides the audio spectrum into seven bands. 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. The seven frequencies are peak detected and multiplexed to the output to provide a DC representation of the amplitude of each band. No external components are needed to select the filter responses. Only an off chip resistor and capacitor are needed to select the on chip clock oscillator frequency. The filter center frequencies track this...

GTE Knob - Large
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: COM-11950 -

"Do you need that extra push over the cliff? The Large sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. We know that most of you are playing at ten, but with the GTE Knob you can go… one louder. Note: It goes to eleven. Dimensions: 36.9 x 15.1mm Documents: Dimensional Drawing Product Video " ...

GTE Knob - Small
OOD!
Price: $1.65
View
Availability: Stocked
Sparkfun Item #: COM-11951 -

"Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. We know that most of you are playing at ten, but with the GTE Knob you can go… one louder. Note: It goes to eleven. Dimensions: 23.6 x 14.2mm Documents: Dimensional Drawing Product Video " ...

H-Bridge Motor Driver 1A
Price: $4.09
View
Availability: Stocked
Sparkfun Item #: COM-00315 -

"Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D. Datasheets: SN754410"

HackRF One
OOD!
Price: $573.77
View
Availability: Back Order
Sparkfun Item #: WRL-13001 -

"This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. If you are wondering what a SDR actually is, it’s OK we can help. A Software Defined Radio is essentially a radio communication device...

Hamburger Mini Speaker
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: COM-14023 -

"This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (quiet and loud) to control how loud your sound needs to be. This speaker really can’t be compared to a good pair of JBLs, but for the price point the Hamburger won’t break the bank for your...

Header - 10-pin Male (SMD, 0.1")
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-11542 -

"These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is a 10-Pin male header. Documents: Datasheet "

Header - 2x23-pin Male (PTH, 0.1")
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-12791 -

"This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet "

Header - 2x3 (Female, 0.1")
OOD!
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: PRT-13010 -

"This is a simple 2x3 female PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet "

Header - 2x3 (Male, 0.1")
OOD!
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: PRT-12807 -

"This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet "

Header - 2x8 (Male, 0.1")
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-13156 -

"This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet "

Header - 4-pin Male (SMD, 0.1", Right Angle)
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: PRT-12638 -

"This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack. Pins have 0.1" spacing between rows and between pins. Documents: Dimensional Drawing "

Header - 6-pin Female (SMD, 0.1")
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-11544 -

"These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is a 6-Pin female header. Documents: Datasheet "

Header - 6-pin Male (SMD, 0.1")
OOD!
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: PRT-11540 -

"These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is a 6-Pin male header. Documents: Datasheet "

Header - 6-pin Male (SMD, 0.1", Right Angle)
OOD!
Price: $1.65
View
Availability: Stocked
Sparkfun Item #: PRT-09015 -

"This is a SMD 6 pin right angle male header. We use this header on our LilyPad Main Board. Pins have 0.1" spacing between rows and between pins. Documents: Dimensional Drawing "

Header - 8-pin Female (SMD, 0.1")
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-11543 -

"These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is an 8-Pin female header. Documents: Datasheet "

Header - 8-pin Male (SMD, 0.1")
OOD!
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: PRT-11541 -

"These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is an 8-Pin male header. Documents: Datasheet "

Heat Shrink Kit
Price: $13.83
View
Availability: Stocked
Sparkfun Item #: PRT-09353 -

"We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors, lots of sizes, nothing too long. We specially requested some of the sizes with heat sensitive glue which significantly increases stress relief and water proofing. This kit includes 95 pieces of heat shrink, all of varying colors and sizes, and comes in a...

Heat Sink - Multiwatt Package
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: PRT-09576 -

"This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it’s a great fit for the STA540, L298N, and all of our T-220 package voltage regulators. Documents: Datasheet " ...

Heat Sink Compound
OOD!
Price: $4.30
View
Availability: Back Order
Sparkfun Item #: PRT-09599 -

"This is a 5g syringe of white heatsink compound (aka thermal grease, thermal paste, thermal goo). Use this whenever you’re connecting a component to a heatsink, it’ll really help to dissipate even more potentially damaging heat. This compound is composed of 50% silicone, 20% carbon, and 30% metal oxide. It has a thermal conductivity of 1.172 W/(mK), which should be plenty for voltage regulators, MOSFETs, motor drivers, audio amplifiers, etc. Features: Color: White Thermal...

Heating Pad - 5x10cm
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: COM-11288 -

"These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up. These heating pads are constructed using a mesh of Polyester filament and Micro Metal Conductive Fiber folded into a protective Polyimide Film. The fact that these are low power, flexible and draw little power makes them ideal for things like hand-warmers and other heated garments. Maybe...

Heating Pad - 5x15cm
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: COM-11289 -

"These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up. These heating pads are constructed using a mesh of Polyester filament and Micro Metal Conductive Fiber folded into a protective Polyimide Film. The fact that these are low power, flexible and draw little power makes them ideal for things like hand-warmers and other heated garments. Maybe...

Heatsink TO-220
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-00121 -

"Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation."

Hex Key - 7/64" (Ball End)
Price: $2.85
View
Availability: Back Order
Sparkfun Item #: ROB-12609 -

"These long alloy steel 7/64" hex keys. The ball end style on each hex key allows a machine screw to be tightened at an angle. These hex keys are perfect for the 6-32 screws used by most Actobotics products."

Humidity and Temperature Sensor - SHT15
Price: $50.34
View
Availability: Back Order
Sparkfun Item #: COM-08227 -

"This is a compact and easy to use relative humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip. These sensors are really impressive! Very sensitive and straight forward to use. Features: 2 factory calibrated sensors for relative humidity & temperature Digital 2-wire...

I2C EEPROM - 256kbit
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: COM-00525 -

"2 Wire Serial Communication (I2C) EEPROM - The back bone of any microprocessor project. These 8 pin chips need only two wires to communicate and retain their data even with power failure. Use the 256K EEPROM for some serious data storage! Check out the Portuguese Arduino Tutorial and accompanying Windows App, by Daniel Gonçalves. Documents: Datasheet " ...

IC Test Clip - SOIC 8-Pin
OOD!
Price: $31.22
View
Availability: Back Order
Sparkfun Item #: COM-13153 -

"This is an IC Test Clip for 8-pin small outline integrated circuits (SOIC). This test clip assures a secure connection to all chip leads on an 8-pin SMD SOIC and provides hands-free testing. On this test clip you will find two sets of gold plated contacts, upper contacts to attach wiring and lower contacts for an 8-pin IC. Simply place your choice of IC in the lower contacts and attach female terminated jumper wires to the 0.1" spaced upper contacts and you are ready to start testing!...

Industrial Laser Module - Red
OOD!
Price: $367.17
View
Availability: Back Order
Sparkfun Item #: COM-14924 -

"This is a 900uW Industrial Laser Module that operates at a 650nm wavelength (red). Each laser produces a round spot projection and is equipped with industry standard connectors fabricated into the module body. This greatly simplifies fixture modifications, moving of modules, and module upgrades or replacement. These Industrial Laser Modules feature internal drive circuitry that utilizes automotive electronics to provide maximum surge and static protection to the laser diode. Features: Beam...

Intel Galileo Gen 2
Price: $156.41
View
Availability: Back Order
Sparkfun Item #: DEV-13096 -

"The Intel® Galileo Gen 2 board is based on the Intel® Quark SoC X1000, a 32-bit Intel Pentium®-class system on a chip (SoC). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with shields designed for the Arduino Uno R3. The Galileo board is also software-compatible with the Arduino Software Development Environment, which makes getting started a snap. In addition to Arduino hardware and software compatibility, the...

Interface Cable - SMA Female to SMA Male (25cm)
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: WRL-12861 -

"This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections. These work well for mounting an antenna to the outside of an enclosure, while keeping the electronics neatly inside. Note: If you are looking for...

IR Reflectance Sensor - QRE1113
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: COM-09542 -

"The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the collector and emitter of a phototransistor. The IR diode has a max forward current of 50mA and operates at 940nm. Breakout boards with analog and digital outputs are also available. Features: Phototransistor output No contact surface...

JST 2 Holes Female Connector
OOD!
Price: $1.21
View
Availability: Back Order
DFRobot Item #: FIT0148 -

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. |Specification| 2-pin 2.0mm mating connector housing 28-26 AWG crimp pins|Documents| Data Sheet|ShippingList| Connector housing 2-pin 2.0mm(0.08") ×10 Crimp pins ×20 ...

JST 3 Holes Female Connector
OOD!
Price: $1.29
View
Availability: Back Order
DFRobot Item #: FIT0149 -

This product includes 3-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (30 units). They work with wires ranging from 28 to 26 AWG. |Specification| 3-pin 2.0mm mating connector housing 28 to 26 AWG crimp pins|Documents| Data sheet|ShippingList| Connector housing 3-pin 2.0mm ×10 Crimp pins ×30 ...

JST 4 Holes Female Connector
OOD!
Price: $2.15
View
Availability: Back Order
DFRobot Item #: FIT0150 -

This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26 AWG. |Specification| 4-pin 2.0mm mating connector housing 28 to 26 AWG crimp pins |Documents| Data Sheet |ShippingList| Connector housing 4-pin 2.0mm &;times;10 Crimp pins &;times;40 ...

JST connector Kit (2.0mm) (0.079 inch)
OOD!
Price: $15.34
View
Availability: Back Order
DFRobot Item #: FIT0299 -

This kit includes PHR-2?PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).|Specification| Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #24) Voltage rating:100V AC,DC Temperature range?-25? to +85??including temperature rise in applying electrical current? Contact resistance?Initial value/10m Ω max. After environmental testing/20m Ω max. Insulation resistance?1000M Ω min. Withstanding voltage?800V...

JST connector Kit (2.54mm) (0.1)
OOD!
Price: $15.34
View
Availability: Back Order
DFRobot Item #: FIT0255 -

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). |Specification| Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range?-25? to +85??including temperature rise in applying electrical current? Contact resistance?Initial value/10m &;Omega; max. After environmental testing/20m &;Omega; max. Insulation resistance?1000M &;Omega; min. Withstanding voltage?1000V AC/minute...

JST RCY Connector - Male/Female Set (2-pin)
Price: $0.87
View
Availability: Stocked
Sparkfun Item #: PRT-10501 -

"This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing. 1 male socket 1 female socket 4 pins Documents: Datasheet " ...

JST Right Angle Connector - Through-Hole 3-Pin
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-09750 -

"This is a 3-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire, and may be useful for interfacing with the popular Sharp infrared proximity sensors or our serial LCDs. Documents: Datasheet" ...

JST Right Angle Connector - White
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-08612 -

"Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. We use these all the time as battery connectors. Documents: Datasheet "

JST Right-Angle Connector - Through-Hole 2-Pin
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-09749 -

"This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and high current rating on these small connectors. This connector will mate with all of our LiPo batteries. Documents: Datasheet"

JST SH Horizontal 6-Pin Connector - SMD
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-10210 -

"Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below. Documents: Drawing "

JST Vertical Connector
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-08613 -

"Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. Documents: Datasheet "

Jumper - 2 Pin
OOD!
Price: $0.61
View
Availability: Back Order
Sparkfun Item #: PRT-09044 -

"These are two pin jumpers (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings on a board or device. Remember when you had to set an IDE hard drive as ‘Master’ or ‘Slave’ on the IDE ribbon? These jumpers were priceless if you sneezed and lost one."

JustBoom Amp HAT
OOD!
Price: $152.94
View
Availability: Back Order
Sparkfun Item #: DEV-14318 -

"The JustBoom Amp HAT is a high-quality audio amplifier designed specifically for the Raspberry Pi. Digital-to-analog conversion is also included with the Amp HAT, so no external sound cards or DACs are required. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately. JustBoom designed the Amp HAT to be simple to install and use. With no soldering required and all the mounting hardware already provided, this...

JustBoom DAC HAT
OOD!
Price: $76.42
View
Availability: Back Order
Sparkfun Item #: DEV-14319 -

"The JustBoom DAC HAT is a plug-and-play, high-resolution, digital-to-analog converter for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately. JustBoom designed the Raspberry Pi DAC HAT to be simple to install and use. With no soldering required and all the mounting hardware already provided, this HAT is suitable for both beginners and seasoned professionals alike. Just connect your...

JustBoom Digi HAT
OOD!
Price: $76.42
View
Availability: Back Order
Sparkfun Item #: DEV-14317 -

"The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately. The JustBoom Digi HAT produces an unmodified, high-quality digital audio data stream for bit-perfect transmission to your hi-fi system. JustBoom designed the Digi HAT to be simple to install and use. With no soldering required and all the mounting hardware...