Products 49-69 of 69
Show
Lilypad USB Plus
OOD!
Price: $47.38
View
Availability: Back Order
Sparkfun Item #: DEV-14631 -

"This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB Plus being a micro-USB cable. We’ve also added an RGB LED in the dead-center of the board along with six white LEDs to act as a sort of bar graph. The LilyPad USB Plus was designed to streamline your next...

LilyPad Vibe Board
OOD!
Price: $12.09
View
Availability: Back Order
Sparkfun Item #: DEV-11008 -

"Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use. LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards...

LilyPad XBee
Price: $26.00
View
Availability: Stocked
Sparkfun Item #: DEV-12921 -

"The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn into your project just attach your favorite XBee to the pre-soldered headers and you are good to go! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and...

LilyTiny
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: DEV-10899 -

"The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will each blink or fade differently. One will blink on and off (2), another will flash a heartbeat pattern (1), another will do a “breathing”...

LilyTwinkle
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: DEV-11364 -

"The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs will twinkle-fade (a lot like fireflies… or lightning bugs, if that’s what you call them). LilyTwinkle is a quick and easy way to add twinkling lights to a project without any...

Love to Code Chibi Clip Mounting Accessory
Price: $19.13
View
Availability: Back Order
Sparkfun Item #: DEV-14593 -

"An essential companion to the Chibi Chip, the Chibi Clip Mounting Accessory enables rapid testing and re-use of the microcontroller board without any headache. With the Chibi Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin. The Chibi Clip was designed with classrooms and teachers on a tight budget in mind. Soldering and taping require consumables, and are semi-permanent attachment solutions that risk some damage to the Chip. The Clip uses...

Magnetic Snap 18mm
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: DEV-08682 -

"A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (all three pieces come as shown). They couple together very strongly (must be pried apart), rotate freely on the axis, and are electrically conductive. We’ve seen snaps like these soldered onto PCBs and batteries to form a strong, but quick disconnect mechanism. Overall connection resistance is less than 200 miliOhm. Snaps will couple when closer than 10mm."

Needle Set
Price: $3.39
View
Availability: Stocked
Sparkfun Item #: TOL-10405 -

"This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye of each size needle is large enough to easily thread with our conductive thread."

ProtoSnap - LilyPad Development Simple
OOD!
Price: $90.34
View
Availability: Back Order
Sparkfun Item #: DEV-11201 -

"The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Simple Development board is a great way to get started in programmable e-textiles. By combining a LilyPad Simple board with 4 LED boards and a buzzer, the ProtoSnap LilyPad Simple Development board gives you...

ProtoSnap - LilyTwinkle
OOD!
Price: $29.48
View
Availability: Back Order
Sparkfun Item #: DEV-11590 -

"The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyTwinkle board is a very simple way to jump right into e-textiles. By including the LilyTwinkle, a coin cell battery holder (with built-in switch), and four white LEDs the ProtoSnap LilyTwinkle board easily allows you...

Slice Ceramic Curved Blades (set of 4)
OOD!
Price: $38.24
View
Availability: Back Order
Sparkfun Item #: TOL-14509 -

"Metal is out; ceramic is in! This is a four-pack of Slice blades made of 100 percent hand-sharpened zirconium oxide. Each blade features a curved edge for added maneuverability and a rounded tip to guard against puncture accidents. As with all Slice ceramic safety blades, these curved blades are non-magnetic, chemically inert, non-sparking and rust-proof, making them perfect not only for craft and hobby projects but also for electronics. Even though these knife blades are designed for use...

Slice Ceramic Straight Blades (set of 4)
OOD!
Price: $38.24
View
Availability: Back Order
Sparkfun Item #: TOL-14510 -

"Metal is out; ceramic is in! This is a four-pack of Slice blades made of 100 percent hand-sharpened zirconium oxide. Each blade features a straight edge and a rounded tip to guard against puncture accidents. As with all Slice ceramic safety blades, these blades are non-magnetic, chemically inert, non-sparking and rust-proof, making them perfect not only for craft and hobby projects but also for electronics. Even though these knife blades are designed for use specifically in the Slice Craft...

Slice Craft Knife
OOD!
Price: $24.85
View
Availability: Back Order
Sparkfun Item #: TOL-14508 -

"The Slice Craft Knife is a high-end hobby knife perfect for precision cutting, scraping and handling. Its ceramic safety blade requires no oil coating and is non-sparking, chemically inert, safe to 1600 degrees Celsius and rust-proof, making it perfect not only for craft and hobby projects but also for electronics! With a textured grip for superior control, this precision knife allows the user to make accurate, delicate cuts. Its ambidextrous no-roll design is weighted for balance and...

Smooth Thread Bobbin - 12m (Stainless Steel)
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: DEV-13814 -

"This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s...

Snap Assortment - 30 pack (male and female)
Price: $6.09
View
Availability: Stocked
Sparkfun Item #: DEV-11347 -

"These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy removal or prototyping. They are 8mm snaps, which is equivalent to a size #1/0 at your local fabric shop. Includes: 15x male snaps 15x female snaps "

SparkFun Large Parts Box - LilyPad (Magnetic)
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14005 -

"When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles…the tools of the trade. Why not pick up a sturdy box to keep your bits and pieces off the floor? This large LilyPad-branded box is made from rigid cardboard printed with a fancy tone-on-tone pattern, label space and the LilyPad logo. There are even magnetic closures embedded in the lid. We like this box because it’s rigid enough to throw in a sewing bag...

SparkFun Parts Box - LilyPad (Magnetic)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-11640 -

"When you’re working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, the tools of the trade. Why not pick up a sturdy little box to keep your bits and pieces off the floor? This LilyPad branded box is made from rigid cardboard printed with a fancy tone-on-tone pattern and LilyPad logo. There are even magnetic closures embedded in the lid. We like this box because it’s rigid enough to throw in a sewing bag and it also looks...

Thermochromatic Pigment - Black (20g)
Price: $22.52
View
Availability: Stocked
Sparkfun Item #: COM-11558 -

"We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number of ways. This particular pigment is a Leuco dye type pigment which is made up of a mixture of Leuco dyes, weak acids and salts microencapsulated in polymer. Sounds complicated, right?...

Thermochromatic Pigment - Bright Yellow (20g)
Price: $22.52
View
Availability: Stocked
Sparkfun Item #: COM-11557 -

"We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number of ways. This particular pigment is a Leuco dye type pigment which is made up of a mixture of Leuco dyes, weak acids and salts microencapsulated in polymer. Sounds complicated, right?...

Thermochromatic Pigment - Red (20g)
Price: $22.52
View
Availability: Stocked
Sparkfun Item #: COM-11555 -

"We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number of ways. This particular pigment is a Leuco dye type pigment which is made up of a mixture of Leuco dyes, weak acids and salts microencapsulated in polymer. Sounds complicated, right?...

Thermochromatic Pigment - Sapphire Blue (20g)
OOD!
Price: $22.52
View
Availability: Stocked
Sparkfun Item #: COM-11556 -

"We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number of ways. This particular pigment is a Leuco dye type pigment which is made up of a mixture of Leuco dyes, weak acids and salts microencapsulated in polymer. Sounds complicated, right?...