All Items
In Stock

Products 193-256 of 2998
Show

Allen Screw Kit

Stocked
Availability: Stocked
Item #: TOL-11731 -
Price: $1.65 inc GST
Sparkfun

"This pack of 4-40 screws comes with a matching hex key. Each screw is 10mm in length. These are left over production stock from the original version of the BigTime Watch Kit so they won’t be...

"This pack of 4-40 screws comes with a matching hex key. Each screw is 10mm in length. These are left over production stock from the original version of the BigTime Watch Kit so they won’t be around for long. Includes: 4x screws 1x hex key Dimensions: 10mm long"

Alligator Clip

Back Order
Availability: Back Order
Item #: PRT-00111 -
Price: $0.95 inc GST
Sparkfun

A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit.

A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit.

Alligator Clip Test Cables (10 PCs Pack)

Out of Stock
Availability: Out of Stock
Item #: FIT0112 -
Price: $8.45 inc GST
DFRobot

These are standard alligator to alligator (crocodile) clip test cables. The alligator clip allow you attach the test point without hold the cables which is really handy. The clip is strong and...

These are standard alligator to alligator (crocodile) clip test cables. The alligator clip allow you attach the test point without hold the cables which is really handy. The clip is strong and grippy. |Specification| Contains two of each: Black, red, white, green, and yellow. 22 gauge heavy insulation copper wire alligator clips at both ends 30cm(11.8&;#39;&;#39;) in length|ShippingList| 10 piece set, Color Coded may vary ...

Alligator Clip with Female Header (10 Pack)

Stocked
Availability: Stocked
Item #: CAB-15186 -
Price: $12.67 inc GST
Sparkfun

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple item for any workbench or makerspace, and with...

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those clips into a breadboard, development platform or anything else to which you would normally be able to attach a hookup wire. Each alligator clip with female header cable has a wire length of 30cm (that's a little less than 1ft) and a port that...

Alligator Clip with Pigtail (10 Pack)

Back Order
Availability: Back Order
Item #: CAB-14303 -
Price: $14.88 inc GST
Sparkfun

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace, and with...

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those clips into a breadboard, development platform or anything else to which you would normally be able to attach a hookup wire. Each alligator clip with pigtail cable has a wire length of 30cm (that's a little less than 1ft) and a male pin that...

Alligator Clip with Pigtail (4 Pack)

Stocked
Availability: Stocked
Item #: CAB-13191 -
Price: $5.32 inc GST
Sparkfun

This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you...

This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to. Each Alligator Clip with Pigtail cable has a wire length of 30cm (that's a little less than 1ft) and a male pin that easily inserts into...

Alligator Clips - Large (Insulated)

Stocked
Availability: Stocked
Item #: PRT-12020 -
Price: $3.39 inc GST
Sparkfun

"These Large Insulated Alligator Clips are great for clamping anything that you don’t want to deform yet large enough to easily manipulate. Thanks to the insulated flat surface, these clips...

"These Large Insulated Alligator Clips are great for clamping anything that you don’t want to deform yet large enough to easily manipulate. Thanks to the insulated flat surface, these clips can be used in a variety of applications such as, gripping small wires, coin cell battery, or large pads (like on our LilyPad boards). These clips offer an open clearance of a little over 8mm, two pan head screw terminals for wire connection, and a max current limit of 10A (theoretically). Sold in...

Alligator Test Leads - Multicolored (10 Pack)

Back Order
Availability: Back Order
Item #: PRT-12978 -
Price: $7.35 inc GST
Sparkfun

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections...

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have. Each lead in this pack of tern is 50cm long with a rubber shrouded alligator clip on each end. There are five different colors, you get two each of: red,...

Alloy 910 Filament 2.85mm - 0.45kg (Natural)

Back Order
Availability: Back Order
Item #: TOL-13938 -
Price: $81.14 inc GST
Sparkfun

This is a 0.45kg (1lb) reel of 2.85mm "natural-colored" Alloy 910 nylon co-polymer filament for 3D printing. Specially developed to exhibit the ideal characteristics of several different classes of...

This is a 0.45kg (1lb) reel of 2.85mm "natural-colored" Alloy 910 nylon co-polymer filament for 3D printing. Specially developed to exhibit the ideal characteristics of several different classes of 3D printing filaments, Alloy 910 offers the strength and durability of nylon with the same minimal shrink nature of PLA. Alloy 910 makes for ideal material to be used in frames or enclosures that are subject to stress and high impact, and items exposed to repeated flexing such as buckles and clasps....

ALS-PT19 Light Sensor

Back Order
Availability: Back Order
Item #: SEN-12566 -
Price: $2.41 inc GST
Sparkfun

This tiny little guy is the ALS-PT19, an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also...

This tiny little guy is the ALS-PT19, an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking for a small and easy to use light sensor, definitely pick up the ALS-PT19! Documents: Datasheet ...

Aluminum Alloy Metal Case for Raspberry Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0460 -
Price: $34.39 inc GST
DFRobot

This credit card-sized case is designed specifically for protecting Raspberry Pi B+/2B/3B. It is made by aluminum alloy and has a durable side panel. The GPIOs is available when opening the panel....

This credit card-sized case is designed specifically for protecting Raspberry Pi B+/2B/3B. It is made by aluminum alloy and has a durable side panel. The GPIOs is available when opening the panel. This case reserves two wall-mounting holes, a Micro SD card slot and some consumer ports.It is compatible with Raspberry Pi 3 model B, Raspberry Pi 2 model B and Raspberry Pi B+|Specification| Dimension: 12.5cm x 8.7cm x 4.8cm (4.92''x 3.42''x 1.89'') Weight: 120g|Documents| Assemble guide...

Aluminum Case For Raspberry Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0417 -
Price: $30.86 inc GST
DFRobot

Give your Pi a stylish, solid and sweet home! This elegantly crafted Raspberry Pi model B+/Pi 2 model B case is designed for the perfect combination of durability, affordability, and strength. It...

Give your Pi a stylish, solid and sweet home! This elegantly crafted Raspberry Pi model B+/Pi 2 model B case is designed for the perfect combination of durability, affordability, and strength. It comes with high quality aluminium casing, CNC metal processing, high-precision dimensions and anodic oxidation processing. Its rigid design also makes it a work of art. The grooved bottom design makes it easy for you to use GPIO cables.Fully compatible with Raspberry Pi 3 model B. Raspberry Pi 2 model...

Aluminum Electrolytic Capacitor Pack-100 PCS

Out of Stock
Availability: Out of Stock
Item #: FIT0117 -
Price: $6.72 inc GST
DFRobot

This is a set of aluminum electrolytic decoupling capacitors. Very handy for experiments and home cooked circuit board. This pack comes with 12 sets of capacitors with various capacitance and...

This is a set of aluminum electrolytic decoupling capacitors. Very handy for experiments and home cooked circuit board. This pack comes with 12 sets of capacitors with various capacitance and working voltage.|ShippingList| 50V 1UF x10 50V 2.2UF x10 50V 3.3UF x10 50V 4.7UF x10 50V 10UF x10 25V 22UF x10 25V 33UF x10 25V 47UF x10 16V 100UF x10 16V 220UF x10 16V 330UF x10 16V 470UF x10 ...

Aluminum Heatsink Case for Raspberry Pi 4 - Obsidian Black

Back Order
Availability: Back Order
Item #: PRT-15773 -
Price: $40.70 inc GST
Sparkfun

Why use a heatsink and a case, when you can use a heatsink case?! This black, anodized aluminum case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load. This case...

Why use a heatsink and a case, when you can use a heatsink case?! This black, anodized aluminum case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load. This case is great for situations where you want completely silent cooling, like home media centers. It comes with a thermal pad to provide thermal contact between the CPU and top case, and a handy Allen Key and set of hex bolts to attach the case together. The case gives you access to all of the ports, pins,...

Aluminum Heatsink Cooling Fan for LattePanda

Out of Stock
Availability: Out of Stock
Item #: FIT0504 -
Price: $20.69 inc GST
DFRobot

The low profile ultra low noise fan keeps your LattePanda running at a stable temperature. The 2-Pin jumper connector makes it easily to connect with the CN2 headers on the board.The aluminum heat...

The low profile ultra low noise fan keeps your LattePanda running at a stable temperature. The 2-Pin jumper connector makes it easily to connect with the CN2 headers on the board.The aluminum heat sink includes an adhesive thermal pad on the rear that can stick on the metal shield on the board. With its aluminum casing, heat from CPU will be absorbed fast, giving you the best performance. This is a simple and effective way to keep your Lattepanda(win10 mini pc) cool!Note: Please pay attention...

Aluminum Multi-Purpose Servo Bracket

Out of Stock
Availability: Out of Stock
Item #: FIT0038 -
Price: $9.48 inc GST
DFRobot

High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs. |Documents| Mechanical Drawing...

High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs. |Documents| Mechanical Drawing |ShippingList| Servo bracket x1 M4screw set x4

Ambient Light Sensor - TEMT6000x01

Out of Stock
Availability: Out of Stock
Item #: COM-08348 -
Price: $3.03 inc GST
Sparkfun

This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light, the stronger the base bias. Simple to use! Simple breakout board available below....

This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light, the stronger the base bias. Simple to use! Simple breakout board available below. Documents: Hookup Guide Datasheet

Ambient Light Sensor - VEML7700 (Qwiic)

Back Order
Availability: Back Order
Item #: SPX-18981 -
Price: $12.30 inc GST
Sparkfun

Looking for a Qwiic sensor that can measure the ambient light level directly in lux? This is it! The VEML7700 is a high accuracy, 16-bit resolution, digital ambient light sensor in a miniature...

Looking for a Qwiic sensor that can measure the ambient light level directly in lux? This is it! The VEML7700 is a high accuracy, 16-bit resolution, digital ambient light sensor in a miniature transparent 6.8 mm x 3.0 mm x 2.5 mm package. It includes a high sensitivity photodiode, a low noise amplifier, a 16-bit A/D converter and supports an easy to use I2C bus communication interface. FiltronTM technology adaption: close to real human eye response O-TrimTM technology adoption: ALS output...

Ambient Light Sensor 3mm

Back Order
Availability: Back Order
Item #: SEN-22923 -
Price: $2.70 inc GST
Sparkfun

The TEPT4400 ambient light sensor from Vishay® is a silicon NPN epitaxial planar phototransistor. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm....

The TEPT4400 ambient light sensor from Vishay® is a silicon NPN epitaxial planar phototransistor. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm. Documents: Datasheet

Ammonia Gas Sensor - MQ-137

Back Order
Availability: Back Order
Item #: SEN-17053 -
Price: $80.05 inc GST
Sparkfun

The MQ-137 is an Ammonia (NH₃) gas sensor from Winsen. The sensing element is SnO2, which has lower conductivity in clean air. When NH₃ (Ammonia) gas exists, the sensor’s conductivity gets higher...

The MQ-137 is an Ammonia (NH₃) gas sensor from Winsen. The sensing element is SnO2, which has lower conductivity in clean air. When NH₃ (Ammonia) gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. A simple circuit makes measuring this change in conductivity and turning it into data fairly straight-forward, but does require some calibration. For easy Solderability; use our Gas Sensor Breakout Board. Documents: Datasheet Videos ...

Amphenol FCI Clincher Connector (2 Position, Female)

Back Order
Availability: Back Order
Item #: COM-14194 -
Price: $4.68 inc GST
Sparkfun

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it...

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will "clinch" around the conductors and break them out to two female 0.1" spaced pin headers! Though the Clincher connector can be used with FFCs, we also like to use them with our FlexiForce sensors and other flex/force sensors found in the Recommended...

Amphenol FCI Clincher Connector (2 Position, Male)

Back Order
Availability: Back Order
Item #: COM-14195 -
Price: $4.68 inc GST
Sparkfun

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it...

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will "clinch" around the conductors and break them out to two male 0.1" spaced pin headers! Though the Clincher connector can be used with FFCs, we also like to use them with our FlexiForce sensors and other flex/force sensors found in the Recommended Products...

Amphenol FCI Clincher Connector (3 Position, Female)

Back Order
Availability: Back Order
Item #: COM-14196 -
Price: $2.41 inc GST
Sparkfun

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it...

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will "clinch" around the conductors and break them out to three female 0.1" spaced pin headers! Though the Clincher connector can be used with FFCs, we also like to use them with our FlexiForce sensors and other flex/force sensors found in the Recommended...

Amphenol FCI Clincher Connector (3 Position, Male)

Back Order
Availability: Back Order
Item #: COM-14197 -
Price: $2.41 inc GST
Sparkfun

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it...

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will "clinch" around the conductors and break them out to three male 0.1" spaced pin headers! Though the Clincher connector can be used with FFCs, we also like to use them with our FlexiForce sensors and other flex/force sensors found in the Recommended...

Analog Gas Sensor

Out of Stock
Availability: Out of Stock
Item #: DFR0049 -
Price: $17.23 inc GST
DFRobot

Analog Gas Sensor Introduction The gas sensor detects smoke, methane, carbon dioxide and other gases. It is able to give alarms when the smoke/gas leaks.  You can adjust the sensitivity with...

Analog Gas Sensor Introduction The gas sensor detects smoke, methane, carbon dioxide and other gases. It is able to give alarms when the smoke/gas leaks.  You can adjust the sensitivity with the potentiometer. Specification Type: Analog Detector: QM-NG1 Power supply needs: 5V Current: 100mA Pin Definition:  1-Output  2-GND  3-PWR  Document Datasheet Manual Shipping List Sensor (1 unit) Analog Sensor Cable (1 unit) (SKU:FIT0031) ...

Analog Panel Meter - 0 to 5 VDC

Back Order
Availability: Back Order
Item #: TOL-10285 -
Price: $11.49 inc GST
Sparkfun

This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors...

This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm overall. The mounting hole should be 38mm. The overall depth of the meter is 35mm. Documents: Product Sheet

Analog Sensor Cable for Arduino (10 Pack)

Out of Stock
Availability: Out of Stock
Item #: FIT0031 -
Price: $10.34 inc GST
DFRobot

The analog sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board. This price includes 10 pieces of...

The analog sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board. This price includes 10 pieces of cables.Latest Update: Change the analog sensor extension pin mapping to be compatible with the latest IO expansion shield and Romeo analog sensor expansion pinout.Latest Pin mapping for Analog sensor extension Red: PWR; Blue: Signal|Specification| Length:30cm Maximum voltage:&;lt;50V Maximum current:&;lt;1000mA...

Analog to Digital Converter - MCP3002

Back Order
Availability: Back Order
Item #: COM-08636 -
Price: $5.96 inc GST
Sparkfun

The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when...

The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines. Features: 2.7V to 5.5V supply 10-bit resolution 8-pin DIP package 3 wire SPI interface Up to 75,000 samples per second Low power shutdown Documents: Datasheet ...

Anemometer Kit (0-5V)

Out of Stock
Availability: Out of Stock
Item #: SEN0170 -
Price: $94.04 inc GST
DFRobot

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard...

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition. Together with other components, this...

Angle Bracket - 4-40

Back Order
Availability: Back Order
Item #: PRT-10228 -
Price: $1.14 inc GST
Sparkfun

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be...

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such. Sold as single units. Documents: Drawing Product Page (612) ...

Antbo DIY Robot Kit - The Best Robot for Kids

Out of Stock
Availability: Out of Stock
Item #: ROB0140 -
Price: $205.14 inc GST
DFRobot

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation...

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation artificial neuron network through the movement system and optimized gait algorithm to simulate the movement of insects. Rich interactive mode allows users to interact with the robot to have a variety of interesting, but also can use the Antbo app to control robot or voice control.Antbo’s form takes...

Antenna Frequency Sticker Sheet

Back Order
Availability: Back Order
Item #: SWG-20712 -
Price: $3.26 inc GST
Sparkfun

Have you ever reached into a drawer of antennas and wondered what the frequency was for each of them? Now with this antenna frequency sticker sheet you can label your antennas. Each sheet comes with...

Have you ever reached into a drawer of antennas and wondered what the frequency was for each of them? Now with this antenna frequency sticker sheet you can label your antennas. Each sheet comes with 75 stickers of commonly used frequencies. Each individual sticker is: W 15.328mm x H 8.978mm Includes: 75 Stickers: 10x 915MHz 10x 2.4GHz 5x 868MHz 5x 4G 5x 5G 5x 433MHz 5x 5.8GHz 5x L1 5x L2 5x WiFi 5x Bluetooth 5x BLE 5x LoRa ...

APA102C-5050 SMD addressable RGB LED (Cut Tape)

Back Order
Availability: Back Order
Item #: COM-24838 -
Price: $1.14 inc GST
Sparkfun

This version of the APA102C (or “DotStar”) is the regular, 5050-sized (5mmx5mm) SMD LED. With an integrated control circuit embedded, the APA102C-5050 is incredibly bright and colorful. If you look...

This version of the APA102C (or “DotStar”) is the regular, 5050-sized (5mmx5mm) SMD LED. With an integrated control circuit embedded, the APA102C-5050 is incredibly bright and colorful. If you look really closely, you can see the tiny gold chip hidden in there, along with minuscule gold wires connecting the chip to the LED. Since these require a bit of SMD soldering skills to get them attached to your board. it is recommended to have good SMD soldering skills before incorporating the...

APA102C-5050 SMD addressable RGB LED (Whole Reel)

Out of Stock
Availability: Out of Stock
Item #: COM-24839 -
Price: $794.54 inc GST
Sparkfun

This version of the APA102C (or “DotStar”) is the regular, 5050-sized (5mmx5mm) SMD LED. With an integrated control circuit embedded, the APA102C-5050 is incredibly bright and colorful. If you look...

This version of the APA102C (or “DotStar”) is the regular, 5050-sized (5mmx5mm) SMD LED. With an integrated control circuit embedded, the APA102C-5050 is incredibly bright and colorful. If you look really closely, you can see the tiny gold chip hidden in there, along with minuscule gold wires connecting the chip to the LED. Since these require a bit of SMD soldering skills to get them attached to your board. it is recommended to have good SMD soldering skills before incorporating the...

Arcade Joystick

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09136 -
Price: $36.02 inc GST
Sparkfun

This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each direction. This joystick also has a select button that...

This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each direction. This joystick also has a select button that is actuated when the red button is pressed down. This joystick is pretty beefy and very tall because of it. We built up an enclosure just to see what it would look like. Ideally, this joystick would be panel mounted, but actually reading the movement of the joystick is as simple as setting up the...

Arcade Joystick - Short Handle

Stocked
Availability: Stocked
Item #: COM-09182 -
Price: $32.04 inc GST
Sparkfun

4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! Features: ABS plastic and solid alloy construction Uses 4 microswitches to detect on/off position Unique handle...

4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! Features: ABS plastic and solid alloy construction Uses 4 microswitches to detect on/off position Unique handle design Spring return to center Very rugged construction Rated 5A @ 125V, 3A @ 250V* Overall height: 101mm Base: 97x65mm Joystick height: 60mm Documents: Manual ...

Arducam 5MP Plus OV5642 Mini Camera Module

Back Order
Availability: Back Order
Item #: DEV-18440 -
Price: $100.83 inc GST
Sparkfun

The Arducam 5MP Plus OV5642 Mini provides an easy to use camera solution for those working with low-cost microcontrollers such as those used with Arduino and the RP2040 from Raspberry Pi. It's a...

The Arducam 5MP Plus OV5642 Mini provides an easy to use camera solution for those working with low-cost microcontrollers such as those used with Arduino and the RP2040 from Raspberry Pi. It's a general purpose 5MP camera module that's SPI enabled reducing the complexity of controlling the camera. It's a step up in performance from it's predecessor, the Arducam-M-5MP. The most impressive aspect being that it's possible to control more than one of these from the same microcontroller. It...

ArduCam 64MP Autofocus Camera Module

Out of Stock
Availability: Out of Stock
Item #: SEN-21276 -
Price: $135.26 inc GST
Sparkfun

A first for the Raspberry Pi ecosystem: A 64MP camera module that matches the specs of smartphone cameras. The Arducam 64MP Camera Module puts a 64MP sensor with autofocus in the standard Raspberry...

A first for the Raspberry Pi ecosystem: A 64MP camera module that matches the specs of smartphone cameras. The Arducam 64MP Camera Module puts a 64MP sensor with autofocus in the standard Raspberry Pi camera module form factor. Much like the other cameras we carry from Arducam, this sensor easily interfaces to the Raspberry Pi line via the MIPI CSI-2 Ribbon Cable and connectors found on most of the Pi boards. The ArduCam 64MP Autofocus Camera Module allows you to take still images at the...

Arducam Camera Module V3 with Autofocus

Back Order
Availability: Back Order
Item #: SEN-19512 -
Price: $56.56 inc GST
Sparkfun

Based on the 16MP Sony IMX519 sensor, this new camera module gives all Raspberry Pi users every bit of power they need to build future-proof projects. Though the camera boasts two times the...

Based on the 16MP Sony IMX519 sensor, this new camera module gives all Raspberry Pi users every bit of power they need to build future-proof projects. Though the camera boasts two times the resolution of the V2 (16MP with the V3), the exciting new feature is autofocus! The camera makes for a great, low cost alternative to the other Raspberry Pi camera options out there, yet doesn't sacrifice performance. Note: This version does not include the ABS Enclosure which can be purchased directly from...

Arducam Pico4ML TinyML Dev Kit

Out of Stock
Availability: Out of Stock
Item #: DEV-18439 -
Price: $61.48 inc GST
Sparkfun

The Pico4ML TinyML Dev Kit from Arducam is a single board system powered by Raspberry Pi's RP2040 microcontroller. It has the power to run all Tensorflow Lite Micro tiny machine learning examples....

The Pico4ML TinyML Dev Kit from Arducam is a single board system powered by Raspberry Pi's RP2040 microcontroller. It has the power to run all Tensorflow Lite Micro tiny machine learning examples. The board features a QVGA camera module with ultra-low power consumption, configurable 1-bit video data serial interface with video frame and line sync, and the monochrome sensor makes image processing an easy part for most machine vision applications. The audio chip on the Pico4ML is capable of...

Arducam Upgraded Camera Pan Tilt Platform

Back Order
Availability: Back Order
Item #: ROB-18648 -
Price: $61.48 inc GST
Sparkfun

If you're looking for a sturdy pan-tilt mechanism for most of the cameras that are used with Arduino and Raspberry Pi but don't want the weight of metal, this is the rig for you. The Upgraded Camera...

If you're looking for a sturdy pan-tilt mechanism for most of the cameras that are used with Arduino and Raspberry Pi but don't want the weight of metal, this is the rig for you. The Upgraded Camera Pan Tilt Platform from Arducam takes the basics of a three piece plastic platform connected through two digital servos (included), and adds an I²C controller board for ease of use with your favorite microcontroller or SBC platform. The kit includes all parts and mounting hardware. It does not...

Arduino AKX00025 Student Kit

Out of Stock
Availability: Out of Stock
Item #: KIT-17660 -
Price: $181.96 inc GST
Sparkfun

Arduino AKX00025 Student Kit is a programming and electronics kit designed for remote learning that includes step-by-step lessons and complete guidance. This student kit offers lessons that are fun...

Arduino AKX00025 Student Kit is a programming and electronics kit designed for remote learning that includes step-by-step lessons and complete guidance. This student kit offers lessons that are fun and engaging with real-world topics and improves problem-solving and critical thinking skills. The AKX00025 kit is affordable and is used in learning digital logic and electronics topics like the current, voltage, and logic programming. This kit includes 9 lessons and 2 open-ended projects and...

Arduino and Breadboard Holder

Stocked
Availability: Stocked
Item #: DEV-11235 -
Price: $9.60 inc GST
Sparkfun

We've been prototyping for a long time on these awesome little plastic plates but it's time for an upgrade. This version still holds an Arduino and a self-adhesive clear breadboard but we've done...

We've been prototyping for a long time on these awesome little plastic plates but it's time for an upgrade. This version still holds an Arduino and a self-adhesive clear breadboard but we've done away with the plastic clips and now provide screws which give you a more solid and simple connection. Also, because the outside dimensions of the board don't matter anymore, this plate can be used with any board that has the Arduino mounting holes. The Arduino Uno, The Leonardo, FEZ Panda even the...

Arduino CTC GO! - Core Module

Out of Stock
Availability: Out of Stock
Item #: KIT-16339 -
Price: $4,483.35 inc GST
Sparkfun

Engage high school students in STEAM subjects, teach them how to use technology as a tool in a playful, hands-on learning environment, and how to apply that knowledge in the real world. A modular...

Engage high school students in STEAM subjects, teach them how to use technology as a tool in a playful, hands-on learning environment, and how to apply that knowledge in the real world. A modular cross-curricular program, CTC GO! provides educators with an easy-to-use, practical approach to STEAM concepts through project-based learning and enables students to design, create, and test a series of playful, well-documented projects and easy-to-assemble experiments. Think of it just like brushes...

Arduino Engineering Kit Rev2

Back Order
Availability: Back Order
Item #: KIT-17834 -
Price: $726.32 inc GST
Sparkfun

The Arduino Engineering Kit Rev 2 provides extensive learning outcomes, giving students a strong understanding of basic engineering concepts through fun projects that create a collaborative learning...

The Arduino Engineering Kit Rev 2 provides extensive learning outcomes, giving students a strong understanding of basic engineering concepts through fun projects that create a collaborative learning environment. Students are able to connect what they learn with real-world industries, are encouraged to think critically, and improve their depth of knowledge by learning through experimentation. Ideal for advanced high school and college students. The Arduino Engineering Kit Rev 2 is a versatile,...

Arduino Female Header-8 Pins- 10 Pcs

Out of Stock
Availability: Out of Stock
Item #: FIT0104 -
Price: $3.28 inc GST
DFRobot

This is a 8-pin female header which is used on Arduino board. |ShippingList| 8 Pin Header x10

This is a 8-pin female header which is used on Arduino board. |ShippingList| 8 Pin Header x10

Arduino Fio

Back Order
Availability: Back Order
Item #: DEV-10116 -
Price: $58.55 inc GST
Sparkfun

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is a toolkit to sketch your idea physically, and consists of software...

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby. Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An...

Arduino Giga R1 WiFi

Back Order
Availability: Back Order
Item #: WRL-23319 -
Price: $172.20 inc GST
Sparkfun

The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with...

The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due. Let’s break down all the powerful features of this board. Microcontroller (STM32H747XI): This dual core 32-bits microcontroller allows you have two brain...

Arduino GSM Shield 2 (Antenna Connector)

Out of Stock
Availability: Out of Stock
Item #: DFR0262-AC -
Price: $177.64 inc GST
DFRobot

The Arduino GSM Shield 2 allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel. It is possible to...

The Arduino GSM Shield 2 allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel. It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield. The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10’s TX pin and pin 3 to its RX pin. See these notes for...

Arduino Industrial 101

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: DEV-14134 -
Price: $83.37 inc GST
Sparkfun

"The Arduino Industrial 101 is a WiFi evaluation board for the Arduino 101 LGA module based on a MIPS Linux processor. With the Industrial 101 you will possess a fantastic addition to the Arduino...

"The Arduino Industrial 101 is a WiFi evaluation board for the Arduino 101 LGA module based on a MIPS Linux processor. With the Industrial 101 you will possess a fantastic addition to the Arduino family and be able to easily create IoT projects without the need for multiple shields. Similar to the Arduino Yun (in a small form-factor), the Industrial 101 integrates an ATmega32U4 and the Atheros AR9331 SoC to make a dependable evaluation resource! The onboard ATmega32u4 microcontroller has been...

Arduino Mega 2560 R3

Back Order
Availability: Back Order
Item #: DEV-11061 -
Price: $119.03 inc GST
Sparkfun

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop...

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output...

Arduino Nano 33 BLE

Back Order
Availability: Back Order
Item #: DEV-15588 -
Price: $81.03 inc GST
Sparkfun

Designed for short range BT interactions and power savvy projects. This compact and reliable NANO board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful...

Designed for short range BT interactions and power savvy projects. This compact and reliable NANO board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F. Its architecture, fully compatible with Arduino IDE Online and Offline, has a 9 axis Inertial Measurement Unit (IMU) and a reduced power consumption compared to other same size boards. This allows the design of wearable devices and movement sensing projects that need to communicate to other...

Arduino Nano 33 IoT with Headers

Back Order
Availability: Back Order
Item #: DEV-15589 -
Price: $78.57 inc GST
Sparkfun

The ease of use of a Nano board with the addition of secure IoT and BT connectivity. This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power...

The ease of use of a Nano board with the addition of secure IoT and BT connectivity. This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects. Arduino Nanof 33 IoT is fully compatible with the Arduino IoT Cloud and supports full TLS secure transport: the ATECC608A cryptochip stores the cryptographic keys in hardware, offering a very high level of security...

Arduino Nano BLE Sense Rev2

Out of Stock
Availability: Out of Stock
Item #: DEV-21252 -
Price: $106.98 inc GST
Sparkfun

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU...

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz. This will allow you to make larger programs than with the Arduino Uno (it has 1MB of program memory, 32 times bigger), and with a lot more variables (the RAM is 128 times bigger). The main processor includes other amazing features like Bluetooth® pairing via NFC and ultra low power...

Arduino Nano BLE Sense Rev2 with Headers

Back Order
Availability: Back Order
Item #: DEV-21251 -
Price: $106.98 inc GST
Sparkfun

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU...

The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz. This will allow you to make larger programs than with the Arduino Uno (it has 1MB of program memory, 32 times bigger), and with a lot more variables (the RAM is 128 times bigger). The main processor includes other amazing features like Bluetooth® pairing via NFC and ultra low power...

Arduino Nano ESP32

Back Order
Availability: Back Order
Item #: DEV-23320 -
Price: $49.19 inc GST
Sparkfun

Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into...

Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease. Nano ESP32 is a 3.3 V development board based on the NORA-W106-10B from...

Arduino Nano ESP32 with Headers

Back Order
Availability: Back Order
Item #: DEV-23321 -
Price: $51.65 inc GST
Sparkfun

Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into...

Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease. Nano ESP32 is a 3.3 V development board based on the NORA-W106-10B from...

Arduino Nano Every

Stocked
Availability: Stocked
Item #: DEV-15590 -
Price: $40.37 inc GST
Sparkfun

Turn your ideas into a reality quickly with the new Arduino Nano Every This small, robust and powerful board has the same classic Nano footprint loved worldwide. It can be programmed with the easy...

Turn your ideas into a reality quickly with the new Arduino Nano Every This small, robust and powerful board has the same classic Nano footprint loved worldwide. It can be programmed with the easy to use Arduino IDE available offline and online. Get started in minutes with thousands of sketches available in open-source or write your own: it is the perfect choice for your everyday projects. The size of Arduino Nano Every makes it ideal for wearable projects; in experiments, in prototypes or in...

Arduino Nano Stackable Header Kit

Back Order
Availability: Back Order
Item #: PRT-16279 -
Price: $3.55 inc GST
Sparkfun

These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint. This set includes two 15-pin...

These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint. This set includes two 15-pin headers; the pins are spaced by 0.1". Each set of headers allows you to stack a Qwiic Nano shield on top of your Arduino Nano or plug them into a solderless breadboard. Note: Soldering is required for functionality and physical attachment to a shield or board. Includes: 2x 15-pin Female Header...

Arduino Opta Lite

Back Order
Availability: Back Order
Item #: DEV-21278 -
Price: $345.32 inc GST
Sparkfun

Arduino Opta is a secure, easy-to-use micro PLC (Programmable Logic Controller) with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation...

Arduino Opta is a secure, easy-to-use micro PLC (Programmable Logic Controller) with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows professionals to scale up automation projects while leveraging the Arduino ecosystem. Supporting both Arduino sketch and standard PLC languages, including LD (Ladder Logic Diagram) and FBD (Function Block Diagram), it was designed with PLC engineers in mind. Its...

Arduino Opta RS485

Out of Stock
Availability: Out of Stock
Item #: DEV-21279 -
Price: $380.24 inc GST
Sparkfun

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows...

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows professionals to scale up automation projects while leveraging the Arduino ecosystem. Supporting both Arduino sketch and standard PLC languages, including LD (Ladder Logic Diagram) and FBD (Function Block Diagram), it was designed with PLC engineers in mind. Its powerful STM32H747XI dual-core...

Arduino Opta WiFi

Back Order
Availability: Back Order
Item #: DEV-21280 -
Price: $456.86 inc GST
Sparkfun

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows...

Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities. Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows professionals to scale up automation projects while leveraging the Arduino ecosystem. Supporting both Arduino sketch and standard PLC languages, including LD (Ladder Logic Diagram) and FBD (Function Block Diagram), it was designed with PLC engineers in mind. Its powerful STM32H747XI dual-core...

Arduino Portenta C33

Back Order
Availability: Back Order
Item #: DEV-22692 -
Price: $151.34 inc GST
Sparkfun

Ideal to develop cost-effective, real-time applications, Portenta C33 features the Arm® Cortex®-M33 microcontroller by global leader Renesas and supports MicroPython and other high-level programming...

Ideal to develop cost-effective, real-time applications, Portenta C33 features the Arm® Cortex®-M33 microcontroller by global leader Renesas and supports MicroPython and other high-level programming languages. Thanks to its onboard Wi-Fi® and Bluetooth® Low Energy connectivity, the module stands out as an ideal solution for IoT gateways, remote control systems, fleet management and process tracking. While its secure element guarantees industrial-grade security at the hardware level, the...

Arduino Pro 328 - 3.3V/8MHz

Stocked
Availability: Stocked
Item #: DEV-10914 -
Price: $28.27 inc GST
Sparkfun

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower...

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower than other Arduino development boards, it may not be compatible with many Arduino shields which were designed to run at 5V. The Arduino Pro 3.3V still works great with our prototyping shield so you can create your own 3.3V shields. The lower system voltage also has its advantages, like ease of use...