Products 4369-4386 of 4386
Show
Zio Haptic Motor Controller - DRV2605L (Qwiic)
OOD!
Price: $46.18
View
Availability: Back Order
Sparkfun Item #: ROB-15181 -

Haptic feedback can add a more professional level of interaction to your project. The same satisfying vibration you get when you receive a text message, phone call, or install a new app can be brought to your project using the Zio Haptic Motor Board. The board features both the motor and motor driver paired with the Qwiic interface to make adding haptic feedback simple. This motor controller uses a LRA Y-axis motor for vibration and uses the DRV2605L from Texas Instruments to drive the motor....

Zio Qwiic Loudness Sensor
OOD!
Price: $17.93
View
Availability: Back Order
Sparkfun Item #: SEN-15892 -

The Zio Qwiic Loudness Sensor is an I2C device making it easy to measure the noise level in your next project. No soldering required. The Loudness sensor can output ADC value (0-1023) to tell you the level of the noise. Also you can use this ADC value in other projects, like a sound sensor. The loudness value strongly depends on the distance between the sound source and the sensor. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make...

Zio Qwiic OLED Display (0.91 in, 128x32)
Price: $17.93
View
Availability: Back Order
Sparkfun Item #: LCD-16774 -

This OLED Display from Zio can display up to 3 lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a backlight layer (unlike LCDs) and therefore it’s thinner, consumes less power, and has higher contrast. Additionally, The firmware is optimized to update only the part of the screen that changes rather than transferring information for every single pixel during each screen update so speed isn’t compromised however, thanks to this...

Zio Qwiic OLED Display (1.5inch, 128x128)
OOD!
Price: $36.04
View
Availability: Back Order
Sparkfun Item #: LCD-15890 -

Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its 1.5-inch display. On the backside, there are two Qwiic connectors. With the Qwiic connect system no soldering is required to connect it to the rest of your system. Fit for use in small embedded systems, and also suitable for any projects that require displays of any kind, this screen is a must-have for Makers to include in even as...

Zio Ultrasonic Distance Sensor - HC-SR04 (Qwiic)
Price: $28.16
View
Availability: Back Order
Sparkfun Item #: SEN-15171 -

You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. This board improves on the classic by adding a Qwiic connector to it, so now you can communicate over I2C. If you prefer to bypass the Qwiic connector and I2 you can also access the Trigger and Echo pins which are broken out on the edge of the board. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make...

Znter 9V 400mAh USB Rechargeable LiPoly Battery
Price: $19.92
View
Availability: Out of Stock
HobbyKing Item #: MK-897000001-0 -

Introducing the revolutionary new rechargeable battery! the Znter range of batteries are Li-polymer batteries with a difference! The batteries can be charged via a USB cable anywhere, anytime no special charger is required. Simply plug the micro USB cable into the battery and find your nearest available USB port to charge! With over 15 billion Alkaline batteries made and thrown away each year wasting resources, C02 and creating toxic Landfill sites the Znter rechargeable batteries offers an...

Zrn Coated Flat Cutter - 0.0625in. Diameter, #112-Z (2 Pack)
Price: $90.11
View
Availability: Back Order
Sparkfun Item #: TOL-15040 -

This flat mill is perfect for roughing or machining flat or primsatic parts. The cutter is coated with Ziconium Nitride, (ZrN). ZrN is a specialty coating that makes it exceptional for temperature sensitive materials. The coating has excellent corrosion-resistance, lubricity, and is hard enough to suit many different applications. ZrR coating has a unique ability to keep edge build-up to a minimum which makes for a better surface finish. Note: ZrN works best for machining Titanium and Aluminum...

Zrn Coated Flat Cutter - 0.125" Diameter, #102Z (2 Pack)
Price: $78.85
View
Availability: Back Order
Sparkfun Item #: TOL-14857 -

This is a two pack of Zrn coated flat mills from Carbide 3D that are perfect for fabricating with aluminum. Each mill in this pack features a cutting and shank diameter of 0.125 inches and a cutting length of 0.5 inches. These cutters really are great for precision 3D machining and fabrication. These cutters are coated with Zirconium Nitride (Zrn). This is a specialty coating which makes it most suitable for temperature sensative materials. ZrN had excellent corrosion-resistance, lubricity and...

Zrn Coated Flat Cutter - 0.25" Diameter, #201Z (2 Pack)
Price: $112.64
View
Availability: Back Order
Sparkfun Item #: TOL-14856 -

This is a two pack of Zrn coated flat mills from Carbide 3D that are perfect for fabricating with aluminum. Each mill in this pack features a cutting and shank diameter of 0.25 inches and a cutting length of 0.75 inches. These cutters really are great for precision 3D machining and fabrication. These cutters are coated with Zirconium Nitride (Zrn). This is a specialty coating which makes it most suitable for temperature sensative materials. ZrN had excellent corrosion-resistance, lubricity and...

Zrn Coated Flat Stub Cutter - 0.25" Diameter, #203Z
Price: $101.38
View
Availability: Back Order
Sparkfun Item #: TOL-15949 -

These coated flat endmills are perfect for cutting aluminum. They have a ZrN coating which provides a better finish, longer lifespan, and a superior cut compared to a non-coated endmill. This cutter has a shorter flute length to provide greater rigidity and less chatter when cutting. In addition, the shank above the cutter is relieved so that it won't rub on the workpiece when cutting deeper than the flutes. All of our cutters are manufactured here in the US and begin life as a blank of US...

Zrn Coated Single Flute - 0.25" Diameter, #278Z
Price: $90.11
View
Availability: Back Order
Sparkfun Item #: TOL-15952 -

These flat mills are perfect for roughing or machining flat or prismatic parts. If you've got a Nomad or Shapeoko, these are great cutters for cutting plastic and aluminum. All of our cutters are manufactured here in the US and begin life as a blank of US carbide. There's nothing imported here! Note: If you have or are purchasing a Nomad, please be sure you are purchasing a .25" collet and nut to be able to use these cutters. Features: Cutting Diameter: .250" Cutting Length: .75" Shank...

Zrn Coated Single Flute - 2mm Diameter, #282Z
Price: $67.58
View
Availability: Back Order
Sparkfun Item #: TOL-15953 -

These flat mills are perfect for roughing or machining flat or prismatic parts. If you've got a Nomad or Shapeoko, these are great cutters for cutting plastic and aluminum. All of our cutters are manufactured here in the US and begin life as a blank of US carbide. There's nothing imported here! Note: If you have or are purchasing a Nomad, please be sure you are purchasing a precision collet and nut to be able to use these cutters. Features: Cutting Diameter: .078" (2mm) Cutting Length:...

Zrn Single Flute - 0.125" Diameter, #274Z
Price: $67.58
View
Availability: Back Order
Sparkfun Item #: TOL-15950 -

These flat mills are perfect for roughing or machining flat or prismatic parts. If you've got a Nomad or Shapeoko, these are great cutters for cutting plastic and aluminum. All of our cutters are manufactured here in the US and begin life as a blank of US carbide. There's nothing imported here! Note: If you have or are purchasing a Shapeoko, please be sure you are purchasing a precision collet and nut to be able to use these cutters. Features: Cutting Diameter: .125" Cutting Length: .5" Shank...

Zumo Chassis Kit (No Motors)
Price: $17.25
View
Availability: Stocked
MK-Misc Item #: Pololu1418 -

The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo competitions. The main body is composed of black ABS and features a compartment for four AA batteries and sockets for two micro metal gearmotors. It ships as a kit with two silicone tracks, two drive and two idler sprockets, a 1/16″ acrylic mounting plate, and mounting hardware. (Motors and batteries are not included.)This is a clearance item. Further details...

ZX Distance and Gesture Sensor
OOD!
Price: $44.97
View
Availability: Back Order
Sparkfun Item #: SEN-13162 -

The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor uses their GestureSense® technology to recognize the distance of an object away from the sensor up to about 12 inches (30cm, referred to as the “Z” axis) and the location of the object from side to side across the sensor in about a 6-inch (15cm) span, referred to as the “X” axis. You will be able to use I2C or UART to communicate...

Raspberry Pi 3 A+
Price: $67.60
View
Availability: Stocked
Sparkfun Item #: DEV-15139 -

How does a more compact and more economic Raspberry Pi sound to you? The Raspberry Pi 3 A+ is here and, like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, and Bluetooth 4.2/BLE. The RPi3 A+ is still equipped with the same 64-bit processor as the B+ version but has removed the Ethernet connector and three of the USB ports (leaving you with just one). It still also has the same 2x20 GPIO header and CSI/DSI...

Raspberry Pi 4 Model B (2 GB)
Price: $90.00
View
Availability: Back Order
Sparkfun Item #: DEV-15446 -

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 2GB DDR4 RAM version of this board has the ability to run two 4k monitors at once via two micro HDMI ports and features the long-asked-for, true Gigabit Ethernet. This creates a much higher-performing multimedia experience with the new Pi! In addition to two USB2 ports, the Raspberry Pi 4 also has...

Raspberry Pi 4 Model B (4 GB)
Price: $135.31
View
Availability: Stocked
Sparkfun Item #: DEV-15447 -

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 4GB DDR4 RAM version of this board has the ability to run two 4k monitors at once via two micro HDMI ports and features the long-asked-for, true Gigabit Ethernet. This creates a much higher-performing multimedia experience with the new Pi! In addition to two USB2 ports, the Raspberry Pi 4 also has...