GPS Shield

Description: With the GPS Shield you can add GPS functionality to your Arduino. A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not soldered on or included and can be found below in the related items). The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small protoyping area is also provided.

The DLINE/UART switch switches the GPS module's input/output between Arduino's standard TX/RX pins and digital pins 2 and 3. An ON/OFF switch is included which controls power to the GPS module. Finally, the Arduino reset switch is also brought out.

Note: GPS modules are not included with the GPS Shield, and only the EM-406 connector is populated. Headers are also not installed, we recommend the 6 and 8-pin stackable headers.

Features:

• EM-406 connector populated and connected to Arduino UART pins (D0/D1)
• EM-408 and EB-85A connector footprints provided and connected for optional use
• Coin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS module
• Standard Arduino sized shield
• Prototyping area
• GPS serial and PPS signals broken out to a 0.1" header
• Arduino reset button
• ON/OFF switch controls power to GPS module

Documents:
Schematic