Products 1-48 of 55
Show
Edison Robot - V2.0 (Meet Edison) meetediton, edison, robot, meet edison, edison robot,
Spotlight!
Price: $69.00
View
(2)
Availability: Stocked
Edison Item #: EdPack1 -

Meet the New Edison V2.0So what is new with Edison V2.0? Precision DrivingEdison now has wheel encoders. Wheel encoders allow Edison to travel specific distances at exact speeds – think of it as cruise control. Edison can now also turn to specified angles and drive straight – very straight.Improved performanceEdison’s obstacle detection is now more precise and can be calibrated for longer range sensing.Longer battery life – higher quality components and smarter sleep mode that uses less...

Ultimaker 2 Plus ultimaker, ultimaker 2, ultimaker 3d printer, makerbot, up, flashforge,
Price: $3,695.00
View
Availability: Stocked
Ultimaker Item #: Ultimaker2+ -

Ultimaker 2 Plus The Ultimaker 2 Plus series are the pinnacle of 3d Printer technology and come to you after thousands of hours of research and development from the Ultimaker team. "These printers are literally years ahead of anything else we tried. We stopped making printers and went to Ultimaker because they were just so far ahead." - Tim Carr CEO of MindKits on the Ultimaker 3D Printers The easy and reliable 3D printer Premium parts and materials only Ultimaker 2 is made from premium parts...

Maxlife Alkaline Batteries 20 Pack Green
Price: $13.66
View
Availability: Stocked
MK-Misc Item #: BATAAA-A -

Maxlife Alkaline AAA size batteries.Features and benefitsLong lasting alkaline formula.For everyday and high drain devices.Long shelf life.No mercury or cadmium.SpecificationsBattery Capacity (mAh) 1,200.00Battery Power Type AlkalineBrand Name MaxlifeCell Size AAAPackage Quantity 20Rechargeable NoVoltage (V) 1.50Perfect for Edison RobotsWe ran Maxlife and Nicad batteries in an Edison robot continuously driving it in a big circle and these are the results of how long they lasted.Green generic...

Ultimaker 3 - Extended ultimaker, ultimaker 2, ultimaker 3d printer, makerbot, up, flashforge,
Spotlight!
Price: $6,995.00
View
Availability: Stocked
Ultimaker Item #: Ultimaker3-EX -

Ultimaker 3 - ExtendedThe Ultimaker 3 series are the pinnacle of 3d Printer technology and come to you after thousands of hours of research and development from the Ultimaker team. "These printers are literally years ahead of anything else we tried" - Tim Carr CEO of MindKits on the Ultimaker 3D Printers ...

Raspberry Pi 3 Model B
Price: $77.73
View
Availability: Stocked
Sparkfun Item #: DEV-13825 -

Raspberry Pi 3Description: Everyone knows and loves Raspberry Pi, but what if you didn’t need additional peripherals to make it wireless. The Raspberry Pi 3 is here to provide you with the same Pi as before but now with double the ram and a much faster processor. The credit-card sized computer is capable of many of the things that your desktop PC does, like spreadsheets, word-processing and playing high-definition video and games. It can run several flavors of Linux (and even Windows 10...

Ultimaker 2 - Extended Plus ultimaker, ultimaker 2, ultimaker 3d printer, makerbot, up, flashforge,
Spotlight!
Price: $4,695.00
View
Availability: Stocked
Ultimaker Item #: Ultimaker2-EX+ -

Ultimaker 2 Plus - ExtendedThe Ultimaker 2 Plus series are the pinnacle of 3d Printer technology and come to you after thousands of hours of research and development from the Ultimaker team."These printers are literally years ahead of anything else we tried" - Tim Carr CEO of MindKits on the Ultimaker 3D PrintersThe easy and reliable 3D printer Premium parts and materials only Ultimaker 2 is made from premium parts and materials. Ultimaker added a heated bed, which smooths the prints, allows...

Ultimaker 3 ultimaker, ultimaker 2, ultimaker 3d printer, makerbot, up, flashforge,
Price: $5,665.00
View
Availability: Back Order
Ultimaker Item #: Ultimaker3 -

Ultimaker 3 The Ultimaker 3 series are the pinnacle of 3d Printer technology and come to you after thousands of hours of research and development from the Ultimaker team. "These printers are literally years ahead of anything else we tried. We stopped making printers and went to Ultimaker because they were just so far ahead." - Tim Carr CEO of MindKits on the Ultimaker 3D Printers The Ultimaker 3 is the most reliable dual extrusion 3D printer available. Achieve complex designs and improved 3D...

Basic Starter Kit for Raspberry Pi
Price: $63.00
View
Availability: Back Order
Elecrow Item #: EL-RPK08001R -

This is the Kit for Raspberry Pi, developed especially for those beginners who are interested in Raspberry Pi. It has more than 21 kinds of components in it. You won’t need to worry about that you don\'t have proper materials. This do save you a lot of time, so you just need to focus on your project, be more creative, and make some amazing product.Features A complete set for Raspberry Pi Components are most common and useful electronic Specification Box size: 200 x 135 x 45mm Weight:...

Four - Channels Motor Shield For Arduino
Price: $13.53
View
Availability: Back Order
Elecrow Item #: EL-MCS02930M -

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10.FeaturesBe able to drive 4 DC motor and 2 \'hoppy\' ServoBe able to drive 2 stepper and 2 \'hoppy\' Servo The logic control voltage Vss: 4.5~5.5VMotor Supply Voltage: 4.5 ~ 12VReduced control pins needed through 8-stage serial shift...

Starter Kit for Raspberry Pi +Arduino
Price: $45.14
View
Availability: Stocked
Elecrow Item #: EL-DTR61173K -

This starter kit comes with the main components such as LCD1602 display,Step motor,Servo,Remote, touch sensor and Ultrasonic distance sensor, you can make some funny little builds by these things.We will provide detailed and clear tutorial(PDF),there are 26 lessons for Raspberry Pi and 30 lessons for Arduino.In the tutorial,there are clear steps in each lesson that include Overview,Specification,Pin defication,Connection diagram,Demo code,Complie & Run and Application effect for Raspberry Pi...

RFID Reader with Cards Kit- 13.56MHz
Price: $12.32
View
Availability: Stocked
Elecrow Item #: EL-CRF1356KIT -

This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz, it supports ISO 14443A/MIFARE mode, this transmission module utilizes an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz....

L9110 Dual-Channel H-Bridge Motor Driver Module - 12V 800mA
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-AML9110DM -

The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots. This tiny module has two independent L9110Smotor driver chips which can each drive up 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers. A set of male header pins is used to connect this module to your robot\'s microcontroller brain. The motors are attached via two sets of screw terminals. A PWM...

Edison spare parts pack
Price: $23.00
View
Availability: Stocked-NoBackOrder
Edison Item #: ED-SpareParts -

Lost a part of your Edison? Don’t sweat it! The Spare Parts Pack has all of Edison’s removable parts (and some). Plus you can tune up your Edison with the latest parts!Increase programming compatibility across more devices with the new EdComm cable.Has your Edison taken a tumble? Upgrade it to our new super-tough plastics! These new parts have been reinforced and specially treated to withstand high impacts.If your Edison has been used as a roller skate and the internal gears have been damaged...

2-Channel Solid State Relay Module
Price: $15.87
View
Availability: Stocked
Elecrow Item #: EL-ARE00202SL -

Compares with the traditional mechanical relay, the Solid State Relay (SSR) has many advantages: it has a longer life, with a much higher turn on/off speed and no noise. Besides, it also has better resistance to vibration and mechanical shock, and better moisture proof performance. This Solid State Relay Module has two channels, which work and be controlled separately. it is based on Omron G3MB, to control current upto 2A@240VAC, can be widely used in various areas such as computer peripheral...

Breadboard adapter for ESP8266 Serial-to-WiFi transceiver
Price: $7.58
View
Availability: Stocked
Elecrow Item #: EL-CDD8266STW -

This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module. ESP8266 is an inexpensive Serial-to-WiFi tranceiver chip that can connect any microcontroller with a serial port to a WiFi network. Because of its simplicity and low cost, it is getting popular among hobbyists for building Internet of Things (IoT) applications. Out of many breakout boards available for ESP8266, ESP-01 model is the most popular one among hobbyists because it provides...

ESP8266 IOT Board
OOD!
Price: $30.10
View
Availability: Back Order
Elecrow Item #: EL-DPO82666E -

This is a ESP8266 IOT board- our take on an \'all-in-one\' ESP8266 WiFi development board with built in USB and battery charging. It’s an ESP8266 WiFi module with all the extras you need, The most important part is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial...

A4988 Stepper Motor Driver Module
OOD!
Price: $5.83
View
Availability: Back Order
Elecrow Item #: EL-P3DA4988D -

A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one microstep. No phase sequence tables,...

Water Proof Integrated Ultrasonic Ranging Module- JSN-SR04T
Price: $34.53
View
Availability: Stocked
Elecrow Item #: EL-SP0433JSN -

There are many ultrasonic ranger module on the market, but sometimes, these kind of sensor needs to work in conditions more than the Lab. This water proof ultrasonic sensor meets this requirement. It has a good performance and almost the same usage of HC-S04 module. There is also a simillar JSN-B02 module that is more easy to install and waterproofing.Featuressmall size, easy to uselow voltage, low power consumptionhigh accuracystrong anti-jammingintegrated with wire enclosed waterproof probe,...

ESP8266 Evaluation Board ESP-12
Price: $16.24
View
Availability: Stocked
Elecrow Item #: EL-DP8266ESP12 -

This development board is a ESP8266 ESP-12 full evaluation board, The core ESP8666 module was mounted on a PCB with all the GPIO broken out.The board is powered by 3 x AA cells, and an onboard regulator ensures a neat 3.3V supply for the ESP8266. Furthermore, each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC. When searching for this over a WiFi network, the device name is "AI-THINKER" and the password is...

6-12V R385 DC Diaphragm Pumps
Price: $12.08
View
Availability: Stocked
Elecrow Item #: EL-DIY61289P -

This is a R385 DC diaphragm pump, it could be use on a kettle, stove, water dispenser and other tea products, but it was modified to enhance its performance, modified a fixed bracket, and the worklife get greatly improved, even can be achieved 2000 hours. Now it‘s become more useful and can be used in experimental models, regular watering, water-cooled notebook and other occasions.SpecificationsPump Size: 90 mm * 40 mm * 35 mmOutlet diameter: inside diameter of 6 mm, an outer diameter of 8.5...

7" 1024x600 HDMI/VGA/AV Display for Raspberry Pi B/B+/2B/3B
OOD!
Price: $81.67
View
Availability: Back Order
Elecrow Item #: EL-RPA08067R -

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI display with high-res, high-contrast visibility. The display is very easy to use - simply connect the 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. It work connect to any device with direct HDMI such as raspberry pi, banana pi and pcduino. The biggest difference is that it can work when you plug it on device...

DS3231 High Precision RTC Clock Module for Raspberry Pi B+
OOD!
Price: $4.67
View
Availability: Stocked
Elecrow Item #: EL-RPA32311R -

This module based on the DS3231, it is the foreign high precision clock module for Raspberry Pi B+ and Arduino. Device package and function compatible with the DS3231.Complete clock calendar functions including seconds, minutes, hours, day, date, month and year timing. The module can adapt itself 3.3 V and 5 V system without level conversion, it is super convenient!Features to 40\u2103 to + 85\u2103 temperature range, timing accuracy in a plus or minus 5 PPM (+/- 0.432 SEC/day) To provide...

3D Printer RAMPS 1.4 Control Board Arduino Mega Shield
OOD!
Price: $18.62
View
Availability: Stocked
Elecrow Item #: EL-P3D00914RA -

The RAMPS (RepRap Arduino Mega Pololu Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Ramps boards are the...

5V Brushless Portable Submersible Pump
Price: $24.39
View
Availability: Back Order
Elecrow Item #: EL-DIY19560P -

This is a brushless submersible pumps with USB connector, can work at 3.5V to 9V voltage, low noise and low power consumption. Super long working life(more than 30000 hours). Adopt high performance ceramic shaft. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems. You can adjust the water flow as you like by the slide block.If you want to DIY a solar fountain you can click here to choose a solar panel.SpecificationsWorking Voltage:DC 3.5-9VHeight...

Wifi Shield
Price: $92.87
View
Availability: Stocked
Elecrow Item #: EL-ACS17101S -

This WiFi Shield connects your Arduino or Crowduino to the internet wirelessly. Just connect it to your wireless network with a few simple instructions, you can start to control your applications through the internet now. This Wifi Shield utilizes a RN171 which is a complete, standalone TCP/IP wireless network module, to provides your Arduino/Crowduino internet connectivity via 2-pin serial port. Also, on the board there is an on-board micro SD slot ready for your store your data, making you...

Heatsink Kit for Raspberry Pi 2 Model B+
OOD!
Price: $4.67
View
Availability: Back Order
Elecrow Item #: EL-RPA06059B -

A heat sink kit for raspberry pi 2/model B+, it can avoid the overheat of your main-control chip. The orange one for cpu that is made of copper material, the other one in blue is made of aluminum to protect the south-bridge chip. Wish your raspberry pi “clam down!”FeaturesMaterial: Aluminium and CopperTo fit: RAMSize:12 x 9 x 9mm aluminum heatsink 13 x 12 x 5mm copper heatsinkweight: 6g/setPackage listHeatsink(2pcs)x1 ...

GPIO Expansion Board for Raspberry Pi B+/2B/3
Price: $51.67
View
Availability: Stocked
Elecrow Item #: EL-RPA28115G -

We believe that you’ve got the raspberry pi 3/2B you want. At now you need to prepare a expansion board for your pi. DVK512 is a good choice, it integrates various components and interfaces for connecting external accessory boards. It's ideal for Raspberry Pi evaluation and development. Here is functional structure chart:1, Pinheaders for connecting with the RPi2, UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART, etc.3, 8I/Os interface: easily connects to...

Bluetooth Audio Receiver Decoding Player
OOD!
Price: $25.67
View
Availability: Stocked
Elecrow Item #: EL-CCB25011M -

This is a bluetooth audio receiver module with usb and TF card decoding. Usually it’s can be used as a mp3 player, just a TF card and DC 5V power supply. It has five buttons for you to change mode or achieve other audio control like volume adjustment. It has two modes : music mode and bluetooth device mode. Just press the mode button for switching. When it switch into Bluetooth device mode, it can launch a bluetooth signal, when you connect other device with it, the blue led will stop...

NL6621-Y1 2.4G Uart Serial to WiFi Module for Arduino
Price: $15.17
View
Availability: Stocked
Elecrow Item #: EL-CCW01021C -

NL6621M is a highly integrated SOC, especially for the low-cost high data throughput wireless LAN products and designs. It integrates MCU, MAC, 1T1R baseband and RF transceiver with power amplifier on a single chip NL6621M support 802.11b / g / n and Wi-Fi direct (SDIO card mode), BSS STA, soft AP, WiFi Protected Setup. It also supports WMM-PS and WPA / WPA2 security protocol. NL6621M not only for controlling by the host processor from the device but also can be used as standalone WLAN...

Stepper Motor Flexible Coupling Coupler 5*8MM
OOD!
Price: $5.79
View
Availability: Back Order
Elecrow Item #: EL-P3D0113SMF -

This is 3D printer Stepper Motor Flexible Coupling Coupler.FeaturesBore: 5 * 8MMOuter diameter: 20MM Increased Load-carrying CapacityLength: 25MM

10A/20A Reversing Switch
Price: $4.93
View
Availability: Stocked
Elecrow Item #: EL-DIY10200S -

The latest design of products, very convenient, this design is a small product, more suitable for motor, water pump, air pump and so on. Friends convenience of our DIY model design! This DPDT rocker switch is prewired with jumper bars reversing the polarity in one position. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. It is (On)-Off-(On) - latching in both on positions. Its Black body and button with internal gasket that keeps water...

SparkFun TeensyView
Price: $27.07
View
Availability: Stocked
Sparkfun Item #: LCD-14048 -

Description: The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. The 128x32 monochrome display is controlled with the popular SSD1306 IC, and is a great way to display debug information and to visualize data without the need for a serial terminal. The board matches the Teensy 3 form factor perfectly, and was designed from the ground up to be as flexible as possible while still being able to nest down into a low-profile addition...

3W Infrared lamp for Raspberry Pi Camera
Price: $17.88
View
Availability: Stocked
Elecrow Item #: EL-RPA22070P -

This is a designed wide angle photographic infrared light for the Raspberry Pi camera use, through which you can capture images, photographs and video during the night to complete the purpose in poor lighting situations with the camera. It is very cheap and powerful performance. Precautions: Raspberry Pi power is limited, when the external 3W high-power light sensitive work, there will be varying degrees of fever phenomenon (you could add a external heat sink). Objects within three meters...

Adjustable Infrared Sensor Switch 3 - 50cm
OOD!
Price: $15.12
View
Availability: Stocked
Elecrow Item #: EL-SOD00350S -

This is an infrared distance switch. It has an adjustable detection ranging from 3cm to 50cm. It is small, easy to use/assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Specification Power supply: 5VCurrent: 100mARange: 3-50cm adjustable Red: +5V Yellow: Signal Green: GNDWire length: 45cm ...

12V DC Fan for 3D Printer- 40x40x7
OOD!
Price: $8.87
View
Availability: Stocked
Elecrow Item #: EL-P3D5543DF -

This is a small 40x40x10mm fan for 3D printer. The fan has a DC brushless motor, with an operating voltage of 12V.FeaturesWoring Voltage: 12V Dimension: 40 x 40 10 mm

2 In 1 TF Cards Dual System Switcher for Raspberry Pi
Price: $26.37
View
Availability: Stocked
Elecrow Item #: EL-RPA05036T -

This 2IN1 Two TF cards commutator is specially designed for Raspberry pi B+/2B/3B with double switch systems. You could enjoy the convenience of using two TF cards at the same time to transfer to different systems for playing at the poking of the switch. Moreover if you could change the dial switch to arduino or SCM GPIO controlled, it could help you realize wireless/ remote/ infrared remote control system etc. Note: It should be used when off power or its system will be damaged when on power...

AirBlock - Modular Programmable Drone
Price: $263.35
View
Availability: Stocked
Makeblock Item #: MB-AIRBLO -

Build it. Code it. Fly it. Air Block is Makerblocks latest product for STEM education. It is the first modular, programable and transformable blocks that that allows you to build your dream aircraft/ hovercraft. Conquer the sky, land and water with AirblockAirblock is made of magnetic, modular parts that are easy to assemble and disassemble without the need for tools. It has two main modes: hexacopter drone and hovercraft, but with its modularity you can create even more modes !Creating is in...

Ardumoto- Motor Driver Shield
Price: $32.20
View
Availability: Stocked
Elecrow Item #: EL-AMS00298SP -

This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF. The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3. Control for motor...

Crowtail- Deluxe Kit for Arduino
Price: $133.63
View
Availability: Stocked
Elecrow Item #: EL-CT0177KIT -

The Crowtail- Deluxe Kit contains a large number of modules- 27pcs. And they are choosed 24 kinds of powerful modules for you to build more projects. This kit has prepared 18 lessons for you to drive those modules,like making a vibration alarm and RTC clock, in addition we also teach you how to get data from some kinds of modules.The guidebook is perfect for you to start the project you needed.Some powerful module like A6 GPRS/GSM module and Crowtail- ESP8266 nodeMCU, they could be a leader to...

Crowtail- Starter Kit for Arduino
Price: $88.43
View
Availability: Stocked
Elecrow Item #: EL-CT0026Kit -

The Crowtail products are basic-functional modules that consists of various modules with standardized connectors, each Crowtail module has its specific functions, such as light sensing and temperature sensing. With these Crowtail modules, users do not need to deal with the mess jumper wires or debug the electronic circuits, they can just plug the Crowtail modules together and then play! Crowtail- Starter Kit is the perfect kit for you to dive into the electronics and Arduino world. It consists...

Digital Display Thermometer(DS18B20)
Price: $32.67
View
Availability: Stocked
Elecrow Item #: EL-SEN18220B -

This is a digital display thermometer which use with DS18B20. It has a Panel table that can display the temperature information. Internal use of the latest type of A / D conversion chip and high-stable reference IC, extensive use of SMD components, circuit design and reasonable. It can be used to measure voltage, current, but also external sensors to measure temperature, pressure, displacement, and other physical quantities. Suitable for a variety of digital instrument display purposes. It has...

Easy Pulse V1.1
OOD!
Price: $44.33
View
Availability: Back Order
Elecrow Item #: EL-CDE10301E -

Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip. It is designed for hobby and educational applications to illustrate the principle of photoplethysmography (PPG), which is a non-invasive optical technique of retrieving vital information about the cardiovascular system from the skin surface. It uses an infrared light source to illuminate the finger on one side, and a photodetector placed on the other side measures the small...

ESP8266 IOT Weather Station Kit
Price: $91.86
View
Availability: Stocked
Elecrow Item #: EL-CRT13450K -

When we want to get up early every morning to understand the weather conditions outside, or we want to DIY a weather station. What is more we want to be able to build a smart home product of the initial model, this ESP8266 IOT Weather Station Kit is based on esp8266 wifi function to achieve remote data transmission products, through the three sensors to collect temperature and humidity information and to achieve water droplets detection And UV intensity testing.Three sensor performance is very...

Expansion Board for Raspberry Pi A+ B+ 2
Price: $53.45
View
Availability: Stocked
Elecrow Item #: EL-RPA98360A -

Arduino is a huge ecosystem, if something could enable Pi interface adapt to a standard Arduino pinouts, it will be able to access a variety of Arduino expansion board, to get more available resources. You may need this item- ARPI600. What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.FeaturesCompatible with Arduino UNO, Leonardo, easy access to a variety of Arduino expansion boardOnboard XBee interface, easy access to a variety XBee...

HVFF Copper Union Straight Pneumatic Hand Valves
Price: $4.93
View
Availability: Stocked
Elecrow Item #: EL-DIY14520V -

If you need a general-purpose pipe joints valve switch, it can help you, you need to choose a tube of 4mm diameter, may be a fluorine plastic or PU tube, but you should notice that silicone tube can not be used with it. It can work at harsh environment with long worklife.Featureshand valve are deisgned to turn on and off the airflowSuitable for 4mm tubeLong worklifeSpecificationsMedia: Air or VacuumOperating Pressure:0 ~ 1.0 MPaNegative Pressure:-750mmHgPressure Proof:1.5 MPaOperating...

Keyduino
Price: $85.42
View
Availability: Stocked
Elecrow Item #: EL-CDK45050K -

Keyduino is an Arduino compatible development board with built-in NFC (Near-Field Communication). This board will be the bridge that helps you wirelessly interact with your environment, drive motors, unlock strikes, control relays, read from a temperature sensor and all thanks to built in NFC connectivity, right out of the box. Since the KeyDuino is based on the Arduino Leonardo (ATMEGA32U4) all code that runs on an Arduino Leonardo can also run on a KeyDuino. The board was designed by Pierre...

Max 20A DC Pump/DC Motor Reverse Switch
Price: $7.14
View
Availability: Stocked
Elecrow Item #: EL-DIY25704C -

This is a FR4 material reversing switch, if you need to control the pump or motor reversing, you can easily complete by using it, which allows the maximum 20A current through, quality reliable with passed 3c certification , terminals using the fence terminal 7.62mm pitch, connection is stable too.SpecificationsSize: 3.2 * 6.0CMMaterial: FR4Compatible with: M3 screws and pillarsPackage listPump Switch Converter x1 ...

Mechanical Endstop Collision Switch
OOD!
Price: $3.45
View
Availability: Stocked
Elecrow Item #: EL-SE63009CS -

This is a Robot, model car helicopter crash or collision switch sensor module For Arduino, it normally outputs high voltage, but when the sensor is carsh something such as the wall, the on-board switch will be pressed, and the module outputs low. This module can be installed into any mobile platform to achieve collision detection function via 3P sensor cable and Arduino sensor expansion board connector.SpecificationForefront of a switch module is installed there is a collision, the module...