The Education, 3D Printing and Electronics Specialists. So you're looking for somewhere to buy electronics that offers great pricing, amazing support and lightning fast delivery?

Products 1-12 of 12
Show
Adafruit Push-button Power Switch Breakout
OOD!
Price: $11.33
View
Availability: Back Order
Adafruit Item #: ADA-1400 -

The Adafruit Push-button Power Switch is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching analog circuit that is triggered by a push of the button. Press once to turn on, then press again to turn off. The circuit uses a 3A P-FET to connect and disconnect the IN pin to the OUT pin. Works great from 3V to 14VDC and up to 3A (although the FET gets a little toasty at continuous 3A draw) yet has only 0.5uA quiescent current...

Color 24-Bit LCD 4-3in PSP Touch Screen Connector Breakout
Price: $6.83
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-09224 -

Color 24-Bit LCD 4-3in PSP Touch Screen Connector BreakoutDescription: This is the SMD connector for the PSP touch screen. 4-pin right angle good, friction fit connector with 1 mm pitch.This connector is compatible with the PSP Touch Screen NOT the Sharp Color 24-Bit LCD.Documents: Connector Datasheet Schematic ...

Controllable Four Outlet Power Relay Module version 2
OOD!
Price: $47.51
View
Availability: Back Order
Adafruit Item #: ADA-2935 -

Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects with Raspberry Pi, Arduino, Adafruit Feather, or any other microcontroller board! This beefy relay power module is well designed and is great when you need to control more than one outlet at a time. New! As of August 2017 we now have version 2 of this lovely outlet...

In-line power switch for 2.1mm barrel jack
OOD!
Price: $4.76
View
Availability: Back Order
Adafruit Item #: ADA-1125 -

Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a 5.5/2.1mm barrel jack on one end an a plug on the other. In between is an in-line switch that is rated for 125V and 2Amps (its normally used for lamps, we suppose). Since most people will be using it with no more than 12VDC, we think it can probably handle up to 5A at that voltage.

On/Off Power Switch with Status Light
OOD!
Price: $9.43
View
Availability: Back Order
Adafruit Item #: ADA-3723 -

"HURRY, FRANK, THERE'S TOO MUCH POWER! We'll have to cut the circuit before this reactor goes up in smoke!" This simple but effective product is a solution to all your accidental-tourist-stuck-in-a-nuclear-power-plant-that-just-happens-to-be-right-above-a-now-active-volcano problems! Or just something without an off-switch. Say you have a nice, elaborate setup for your NeoPixel or DotStar LED strips but no easy way to turn them off? Or maybe an IoT device that you're not quite positive really...

Surface Mount Navigation Switch Breakout
Sale!
Was: $12.02
Sale: $5.99
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: COM-08236 -

Surface Mount Navigation Switch BreakoutDescription: This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2VA (360mA at 3.3V and 240mA at 5V).Documents: OS-1305.pdf ...

Switched JST-PH 2-Pin SMT Right Angle Breakout Board
OOD!
Price: $4.76
View
Availability: Back Order
Adafruit Item #: ADA-1863 -

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that is always on. This is compatible with the "JST PH 2-pin" connectors we use in our battery packs.. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and...

Tactile On/Off Switch with Leads
OOD!
Price: $7.52
View
Availability: Back Order
Adafruit Item #: ADA-1092 -

Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable and fabric projects. Can handle up to 14V and 2 Amps! This is a really satisfying switch. As of May 20th, the dimensions of this switch are: Length of wires: 190mm / 7.5" Dimensions of body: 16mm x 15mm x 6mm / 0.6" x 0.6" x 0.2" Weight: 4.4g

USB Cable with Switch
OOD!
Price: $5.62
View
Availability: Back Order
Adafruit Item #: ADA-1620 -

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. The data lines are not connected through - this is a ground/5V power switch only! The switch is on the positive 5V line. A great match for...

USB Extension Cable with Data/Charge Sync Switch
OOD!
Price: $5.62
View
Availability: Back Order
Adafruit Item #: ADA-3438 -

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. You can plug it onto the end of any USB data/sync cable you have: mini-USB, micro-USB, Apple Lightning, or any other proprietary type. Voila! Your cable's data lines can now be switched on or off. Not only is it great for privacy and security concerns, it's also good for use with devices that...

USB Micro B Cable with Data/Charge Sync Switch
OOD!
Price: $9.43
View
Availability: Back Order
Adafruit Item #: ADA-3439 -

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. It can be used with any device that has a micro USB port, which is like just about anything except for Apple devices. Voila! Your cable's data lines can now be switched on or off. Not only is it great for privacy and security concerns, it's also good for use with devices that automatically sync...

USB Power Only Cable with Switch - A/MicroB
OOD!
Price: $11.33
View
Availability: Back Order
Adafruit Item #: ADA-2379 -

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well. Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2. Just hook up the standard USB end to a 5V 1A USB port power supply or 5V 2A USB port power supply and the Micro B end to a Raspberry Pi and you have a Pi with a switch. This cable will also work with anything that has a MicroUSB port. This cable does not...