All Items
In Stock

Products 1-22 of 22
Show

10Pin Female Header - 2.00mm (5pcs Pack)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-CCO21002C -
Price: $0.84 inc GST
Retail: $1.67
Elecrow

    This is a pack which includes 5pcs 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing between pins. Specification Pin Pitch: 2.0mm Contact...

    This is a pack which includes 5pcs 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing between pins. Specification Pin Pitch: 2.0mm Contact Qty: 10 Contact Type: Straight ...

2.54 mm Arduino Male Pin Headers (Straight Black 10pcs)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: FIT0084 -
Price: $5.00 inc GST
DFRobot

This is a blue colored 40 Pin 2.54 mm?0.1"? single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost Arduino connectors. The standard spacing allows use with...

This is a blue colored 40 Pin 2.54 mm?0.1"? single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost Arduino connectors. The standard spacing allows use with solderless breadboards, perforated prototyping PCBs, female headers, and our premium and pre-crimped jumper wires. The single-row header strips can easily be snapped into smaller strips to fit your application. These colored pin headers will help you label pin rails depending on their function. We...

40 Pin Break Away Male Header- Long Straight-10 Pcs

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: FIT0105 -
Price: $8.71 inc GST
DFRobot

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs....

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. It is used on Arduino Ethernet Shield.|ShippingList| 40 Pin Header x10

40 Pin Break Away Male Header- Right Angle-10 Pcs

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: FIT0100 -
Price: $5.00 inc GST
DFRobot

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.|ShippingList| 40 Pin Header x10 ...

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.|ShippingList| 40 Pin Header x10

Alligator Clips - Large (Insulated)

Stocked
Availability: Stocked
Item #: PRT-12020 -
Price: $3.39 inc GST
Sparkfun

"These Large Insulated Alligator Clips are great for clamping anything that you don’t want to deform yet large enough to easily manipulate. Thanks to the insulated flat surface, these clips...

"These Large Insulated Alligator Clips are great for clamping anything that you don’t want to deform yet large enough to easily manipulate. Thanks to the insulated flat surface, these clips can be used in a variety of applications such as, gripping small wires, coin cell battery, or large pads (like on our LilyPad boards). These clips offer an open clearance of a little over 8mm, two pan head screw terminals for wire connection, and a max current limit of 10A (theoretically). Sold in...

Arduino Female Header-8 Pins- 10 Pcs

Out of Stock
Availability: Out of Stock
Item #: FIT0104 -
Price: $3.28 inc GST
DFRobot

This is a 8-pin female header which is used on Arduino board. |ShippingList| 8 Pin Header x10

This is a 8-pin female header which is used on Arduino board. |ShippingList| 8 Pin Header x10

Breadboard Power Supply 5V/3.3V

Out of Stock
Availability: Out of Stock
Item #: DFR0140 -
Price: $7.84 inc GST
DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be...

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12 DC2.1 power jack or from USB power.  The maximum current it can provide is 500mA.  Specification Input voltage: 6-12V (Power Jack) 5V (USB) Output voltage:3.3V/5V Output current:500mA On/Off switch Power status LED Pin Head 5/3.3V output Central positive DC2.1 power...

Color RGB Header (40pcs)

Out of Stock
Availability: Out of Stock
Item #: FIT0342 -
Price: $15.34 inc GST
DFRobot

These customized colored pin headers are extensively used in DFRobot's product range. For instance, we are the first who uses 3 colors to clearly indicate the roles that pin headers play: green -...

These customized colored pin headers are extensively used in DFRobot's product range. For instance, we are the first who uses 3 colors to clearly indicate the roles that pin headers play: green - digital; blue - analog; red - powerWe hope these tiny colorful pin headers help you in your own prototyping,PCB designing projects. Enjoy making! |Applications| Prototyping Arduino processor or shield female headers Custom pcb design|Specification| Pins are spaced by 0.1". Arduino processor R3 header...

Connector for e-paper display

Back Order
Availability: Back Order
Item #: PRT-10151 -
Price: $1.65 inc GST
Sparkfun

Connector for e-paper display Description: This is the 26-pin SMD connector that mates with our e-paper character displays. Documents: Datasheet ...

Connector for e-paper display Description: This is the 26-pin SMD connector that mates with our e-paper character displays. Documents: Datasheet

Electronics Blower Fan

Out of Stock
Availability: Out of Stock
Item #: FIT0241 -
Price: $7.50 inc GST
DFRobot

This is a 2 wire (+-) blower fan for all your cooling needs. |Specification| Supply voltage: DC 12V Current consumption: 0.3A|ShippingList| Blower Fan x1 ...

This is a 2 wire (+-) blower fan for all your cooling needs. |Specification| Supply voltage: DC 12V Current consumption: 0.3A|ShippingList| Blower Fan x1

FTDI Basic Breakout 3.3/5V (Arduino Compatible)

Out of Stock
Availability: Out of Stock
Item #: DFR0065 -
Price: $22.24 inc GST
DFRobot

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be...

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be...

JST connector Kit (2.54mm) (0.1)

Out of Stock
Availability: Out of Stock
Item #: FIT0255 -
Price: $15.34 inc GST
DFRobot

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). |Specification| Current rating:3A AC,DC (AWG...

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). |Specification| Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range?-25? to +85??including temperature rise in applying electrical current? Contact resistance?Initial value/10m &;Omega; max. After environmental testing/20m &;Omega; max. Insulation resistance?1000M &;Omega; min. Withstanding voltage?1000V AC/minute...

MiniMoto - DRV8830 Breakout

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: BOB-11890 -
Price: $11.98 inc GST
Sparkfun

MiniMoto - DRV8830 Breakout Description: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With an operating...

MiniMoto - DRV8830 Breakout Description: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With an operating voltage range of 2.7V to 6.8V and a current limit of 1A the DRV8830 is a versatile little driver.  In addition to the benefit of being controlled via I2C, which frees up data lines and processing on the CPU to be used for other tasks, the MiniMoto has the lowest voltage output capability...

OpenLog

Stocked
Availability: Stocked
Item #: DEV-09530 -
Price: $43.39 inc GST
Sparkfun

Description: The SparkFun OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging...

Description: The SparkFun OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging any received serial data at 9600bps. Sending Ctrl+z three times will drop out of logging and in to command mode. �new� will create a new file. �md� makes a directory. �?� brings up the list of commands. OpenLog doesn�t do a lot, but it does log serial streams extremely well. Example: >new...

Quick Disconnect - Female 1-5 (bag of 50)

Stocked
Availability: Stocked
Item #: PRT-11463 -
Price: $6.87 inc GST
Sparkfun

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are...

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about 1/5" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Female 1/4" (bag of 50)

Stocked
Availability: Stocked
Item #: PRT-11461 -
Price: $6.87 inc GST
Sparkfun

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about ¼" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/4" (bag of 50)

Stocked
Availability: Stocked
Item #: PRT-11462 -
Price: $6.87 inc GST
Sparkfun

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about ¼" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/5" (bag of 50)

Stocked
Availability: Stocked
Item #: PRT-11464 -
Price: $6.87 inc GST
Sparkfun

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about 1/5" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Screw Terminals 5mm Pitch - 3Pin (5pcs Pack)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-CC010212C -
Price: $1.32 inc GST
Retail: $1.99
Elecrow

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire....

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire. Specification Rated: 250,16A(250V,17.5A)Contact resistance: 200m? MaxInsulation resistance: 5000M? MinTemp range: -30?~+120?Max Soldering: +260? 5sWire range: 22-14AWG(1.5mm2)Strip length: 3.5mm      ...

Serial Connector - Ribbon Cable (Female- 9-pin)

Stocked
Availability: Stocked
Item #: PRT-11157 -
Price: $3.39 inc GST
Sparkfun

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make...

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the one unneeded wire. Matching male connectors are available and can be found in the related items below. Includes: Male DB9 connector body Rear...

Tilt-a-Whirl Breakout - RPI-1031

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: SEN-12011 -
Price: $6.99 inc GST
Sparkfun

Tilt-a-Whirl Breakout - RPI-1031 Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout...

Tilt-a-Whirl Breakout - RPI-1031 Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes it easier to incorporate the RPI-1031 in your next project by breaking the necessary pins out to standard 0.1" spaced headers. This board will work at either 3.3 or 5V. Documents: Schematic Eagle Files Datasheet (RPI-1031) Product Page(RPI-1031) Hookup Guide bildr Tutorial Product...

WiiChuck Adapter (Arduino Compatible)

Out of Stock
Availability: Out of Stock
Item #: DFR0062 -
Price: $3.28 inc GST
DFRobot

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire...

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. Compared with standard WiiChuck, the DFRobot WiiChuck has extra 4 pins which allow you connect it to two devices. The Wii Nunchuck is loaded with features -- a 2-axis joystick, two buttons and a 3 axis ?2g accelerometer -- and any...