Products 1-48 of 85
Show
Mini Pushbutton Switch
OOD!
Price: $0.57
View
Availability: Back Order
Sparkfun Item #: COM-00097 -

"We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA. Documents: Dimensional Drawing (NEEDS UPDATE! COMING SOON!) "

Big Dome Pushbutton - Red
Price: $16.12
View
Availability: Stocked
Sparkfun Item #: COM-09181 -

"It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring. Features: LED indicator light runs at 12VDC Bulb holder is easy to install or remove 3 Terminals Button Actuator microswitch included Microswitch reliability tested to 10,000,000...

Buzzer Module
Price: $2.99
View
Availability: Stocked
Elecrow Item #: EL-SLS01010S -

This buzzer module is simple to use. Just Connect the "I/O" pin of the module to the digital outputs of Arduino, it will emit a tone when the output is high.Of cause it can be connected to an analog pulse-width modulation output to generate various tones and effects. Wiki & External links Schematic ...

Rocker Switch - Round w/ Blue LED
Price: $2.50
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: COM-11155 -

"These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals, the two that you would normally see plus a ground tab for the blue LED lamp inside. Although these are rated for 12v, the LED works with as little as 5V. Features: Blue LED Indicator SPST on-off Rated up to 16A @ 12v 20.2mm Diameter Mounting Hole Documents:...

Slide Pot - X-Large (10k Linear Taper)
Price: $4.76
View
Availability: Out of Stock
Sparkfun Item #: COM-09119 -

"A simple slide potentiometer can go a long way. Rated at 10kOhm and 0.5W. Comes with solder tab connections. The taper profile for this slide can be found in the datasheet below labeled “0B” Documents: Datasheet "

Slide Potentiometer Knob
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: COM-09120 -

"This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide. Documents: Datasheet "

Rocker Switch - SPST (right-angle)
Price: $1.58
View
Availability: Stocked
Sparkfun Item #: COM-08837 -

"Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you out. RoHS and UL approved. Features: Right angle solid through hole mounting Can also be snap-in panel mounted Rated up to 15A @ 125V Documents: Mechanical Drawing " ...

Big Dome Pushbutton - Green
Price: $16.80
View
Availability: Stocked
Sparkfun Item #: COM-11275 -

"It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring. Features: LED indicator light runs at 12VDC Bulb holder is easy to install or remove 3 Terminals Button Actuator microswitch included Microswitch reliability tested to 10,000,000...

Lamp Switch - SPST (inline)
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: COM-11477 -

"This inline switch is great when you just want a simple on/off toggle switch that’s already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires, solder them in place, and press-fit the enclosure together and you have a clean-looking switch. Features: SPST 6A, 250VAC Press-Fit Enclosure Clicky Sound Documents: Datasheet Product Video " ...

Reed Switch
Price: $3.16
View
Availability: Stocked
Sparkfun Item #: COM-08642 -

"This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. This switch can carry up to 1.2A. Documents: Datasheet Hookup Guide Application Note " ...

Big Dome Pushbutton - Blue
OOD!
Price: $16.07
View
Availability: Back Order
Sparkfun Item #: COM-11274 -

"It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring. Features: LED indicator light runs at 12VDC Bulb holder is easy to install or remove 3 Terminals Button Actuator microswitch included Microswitch reliability tested to 10,000,000...

Toggle Switch and Cover - Illuminated (Red)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: COM-11310 -

"This simple on-off switch is rated for 20A at 12V but who cares about all that, it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They’re also a great safety feature to ensure that you don’t accidentally fire the missiles (or whatever it is your switch does). As if you needed any more convincing, they’re also illuminated with a small LED in the end of the switch. These can be panel...

Missile Switch Cover - Red
Price: $3.16
View
Availability: Stocked
Sparkfun Item #: COM-09278 -

"It’s not what project you have in mind that may use a rocket launch switch… The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switch from accidentally being turned on. When flipped up, the user has full access to a switch underneath. Upon closing the cover, the cover will force the switch arm back into the lower position - a safety mechanism so you can quickly hit...

Button Pad 4x4 - LED Compatible
OOD!
Price: $16.07
View
Availability: Back Order
Sparkfun Item #: COM-07835 -

"This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button. 16 button pad can be split up into four, 4 button pads. Each button has a conductive...

Thumb Slide Joystick
OOD!
Price: $5.65
View
Availability: Back Order
Sparkfun Item #: COM-09426 -

"This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting ‘slide’ feeling. For wiring this part, if you look at the device from the bottom the pin out goes 1) x-axis output 2) +5V 3) y-axis output 4) gnd Pin 4 is the pin closest to the 2 mounting tabs found on one side of the device. When connected to an Arduino, you can expect a range of about 128 to 775 on each axis. The rubber...

SPDT Mini Power Switch
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: COM-00102 -

"Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch. Documents: Dimensional Drawing "

Mini Pushbutton Switch - Tall
OOD!
Price: $0.81
View
Availability: Back Order
Sparkfun Item #: COM-08605 -

"Miniature Single Pull Single Throw switches. These are high quality Omron type B3F momentary on switches. This switch has a very large 10mm tall button. Perfect as an embedded switch behind an enclosure wall. Rated up to 50mA."

Tactile Button Assortment
OOD!
Price: $8.00
View
Availability: Back Order
Sparkfun Item #: COM-10302 -

"These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total of 12 buttons. The colored caps are removable and the buttons fit into breadboards. See the drawing below for exact dimensions. Documents: Drawing "

Mini Pushbutton Switch - SMD
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: COM-08720 -

"Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up to 50mA. Documents: Dimensional Drawing "

Button Pad 4x4 - Breakout PCB
Price: $16.12
View
Availability: Stocked
Sparkfun Item #: COM-08033 -

"This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad. Now with footprints for diodes! Use the super cheap 1N4148 through hole diodes. These can be used to isolate the switches to make for a bit easier decoding. Documents: Schematic Eagle Files Hookup Guide Datasheet...

Metal Pushbutton - Momentary (16mm, Green)
OOD!
Price: $8.08
View
Availability: Back Order
Sparkfun Item #: COM-11968 -

"This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection. These momentary buttons are rated up to 3A and 250VAC while the LED is rated for 5-12V. Note: The images for this button show...

Toggle Switch
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09276 -

"This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover. Dimensions: 0.5 x 0.55 x 1.45" Documents: Dimensional Drawing "

Arcade Joystick - Short Handle
Price: $24.21
View
Availability: Stocked
Sparkfun Item #: COM-09182 -

"4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! Features: ABS plastic and solid alloy construction Uses 4 microswitches to detect on/off position Unique handle design Spring return to center Very rugged construction Rated 5A @ 125V, 3A @ 250V Dimensions: Overall height: 101mm Base: 97x65mm Joystick height: 60mm Documents: Manual " ...

Microswitch - 3-terminal
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: COM-09506 -

"This is a 3-terminal microswitch, with a small push-button. This switch has a great ‘clicky’ sound to it, and a nice tactile feel. Features: Max 4A 125/240VAC 2 mounting holes Long mechanical operating life Contact resistance: less than 0.2Ω Insulation resistance: 500Ω minimum @500VDC Rated to 10000 clicks Dimensions: 0.63x1.1x0.42" Weight: 5g " ...

10A/20A Reversing Switch
Price: $4.93
View
Availability: Stocked
Elecrow Item #: EL-DIY10200S -

The latest design of products, very convenient, this design is a small product, more suitable for motor, water pump, air pump and so on. Friends convenience of our DIY model design! This DPDT rocker switch is prewired with jumper bars reversing the polarity in one position. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. It is (On)-Off-(On) - latching in both on positions. Its Black body and button with internal gasket that keeps water...

Big Dome Pushbutton - Yellow
Price: $16.80
View
Availability: Stocked
Sparkfun Item #: COM-11273 -

"It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring. Features: LED indicator light runs at 12VDC Bulb holder is easy to install or remove 3 Terminals Button Actuator microswitch included Microswitch reliability tested to 10,000,000...

Pushbutton 33mm - Green
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: COM-09179 -

"This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features: Convex Button 35.75 mm Diameter x 46 mm Height M28 thread Mounting Hole Diameter: 27.3 mm Net weight: 0.015kg Rated for 12V/1A "

Arcade Joystick
Price: $32.31
View
Availability: Stocked
Sparkfun Item #: COM-09136 -

"This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each direction. This joystick also has a select button that is actuated when the red button is pressed down. This joystick is pretty beefy and very tall because of it. We built up an enclosure just to see what it would look like. Ideally, this joystick would be panel mounted, but actually reading the movement of the joystick is as simple as setting up the...

Concave Button - Black
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09339 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Cap diameter: 35mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

Cherry MX Switch
OOD!
Price: $1.72
View
Availability: Back Order
Sparkfun Item #: COM-13834 -

"Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the globe. This ‘blue’ version Cherry MX Switch is favored by most due to its secondary internal actuator making it less likely to “double-tap.” If you are looking for a noticeably audible and high-quality key switch, this is the perfect option...

2 Positions DIP Switch (3pcs pack)
OOD!
Price: $1.82
View
Availability: Back Order
Elecrow Item #: EL-CSW002542P -

This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements..SpecificationPosition Number: 2Color: Red Pitch: 2.54mmDistance between two rows: 8mmPin Diameter: 0.7mm ...

4 Positions DIP Switch (3pcs pack )
OOD!
Price: $2.05
View
Availability: Back Order
Elecrow Item #: EL-CSW002544P -

This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements..SpecificationPosition Number: 4Color: Red Pitch: 2.54mmDistance between two rows: 8mmPin Diameter: 0.7mm ...

5-way Tactile Switch
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-10063 -

"Sometimes you want a small input and a single button just won’t cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount, but easily soldered. Documents: Datasheet "

6 Positions DIP Switch (3pcs pack )
OOD!
Price: $2.29
View
Availability: Back Order
Elecrow Item #: EL-CSW002546P -

This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements..SpecificationPosition Number: 6Color: Red Pitch: 2.54mmDistance between two rows: 8mmPin Diameter: 0.7mm ...

Blackberry Trackball
OOD!
Price: $8.00
View
Availability: Back Order
Sparkfun Item #: COM-09308 -

"This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a tiny circular magnet on each end. Great when paired with very small SMD Hall effect sensors. Ball is clear to allow for LEDs placed underneath to light up the ball. Features: Center select button 360° direction Dimensions: 9x11mm Documents: Blackberry Teardown Inside the Blackberry (BOM) " ...

Button Pad 2x2 - Breakout PCB
OOD!
Price: $8.00
View
Availability: Back Order
Sparkfun Item #: COM-09277 -

"This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad. Now with footprints for diodes! Use the super cheap 1N4148 through hole diodes. These can be used to isolate the switches to make for a bit easier decoding. Documents: Schematic Eagle Files " ...

Button Pad 2x2 - LED Compatible
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: COM-07836 -

"This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button. Each button has a conductive circle backing so that a switch can be created with exposed...

Button Pad 2x2 Bottom Bezel
OOD!
Price: $6.38
View
Availability: Back Order
Sparkfun Item #: COM-08747 -

"This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the top bezels will create a 4x4 bezel appropriate for the full button pad. Documents: Dimensional Multi-Unit Assembly 3D Model " ...

Button Pad 2x2 Top Bezel
OOD!
Price: $6.38
View
Availability: Back Order
Sparkfun Item #: COM-08746 -

"This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad. Documents: Dimensional Multi-Unit Assembly 3D Model " ...

Concave Button - Blue
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09337 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Cap diameter: 35mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

Concave Button - Green
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09341 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Cap diameter: 35mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

Concave Button - Red
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09336 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Bezel diameter: 32mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

Concave Button - White
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09340 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Cap diameter: 35mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

Concave Button - Yellow
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: COM-09338 -

"This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel. Features: Concave plunger design Durable nylon material Microswitch: max 3A @ 120 VAC Microswitch reliability tested to 10,000,000 cycles Includes 3 terminal microswitch Net weight: 25g Dimensions: Cap diameter: 35mm Overall height: 65mm Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) " ...

DIP Switch - 8 Position
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: COM-08034 -

"DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as general control switches. Documents: Datasheet "

Foot Pedal Switch
OOD!
Price: $9.61
View
Availability: Back Order
Sparkfun Item #: COM-11192 -

"Put the pedal to the metal with this metal foot switch. This is the same kind of foot pedal you might find switching the power supply for a tattoo machine or as a sustain pedal on an electric piano. The non-slip pad on top and rubber bumpers on the bottom keep the pedal from slipping out of place during use. If you open it up, it’s a simple momentary switch and a big spring and that’s about it. This pedal has, however, been described as “luxuriant, elegant and...

LED Tactile Button - Blue
Price: $3.22
View
Availability: Stocked
Sparkfun Item #: COM-10443 -

"This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don’t easily fit into a breadboard, but check below for a breakout board. We also have these in a a variety of colors, check below to see the others. Documents: Datasheet Drawing " ...

LED Tactile Button - Green
Price: $3.22
View
Availability: Stocked
Sparkfun Item #: COM-10440 -

"This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don’t easily fit into a breadboard, but check below for a breakout board. We also have these in a a variety of colors, check below to see the others. Documents: Datasheet Drawing " ...