Products 1-48 of 52
Show
80cm Infrared Proximity Sensor-GP2Y0A21YK0F
Price: $22.87
View
Availability: Stocked
Elecrow Item #: EL-SPGP2YIP -

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range...

3 Axis Digital Accelerometer - ADXL345
Price: $7.00
View
Availability: Stocked
Elecrow Item #: EL-SMS33451S -

This ADXL345 module is low power consumption and a 3-axis accelerometer, it communicate with MCU with I2C or SPI communication with user selectable sensitivity and 10-13 bit resolution. The ADXL345 is well suited to measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0\xb0. Several special sensing functions are provided....

G1/2" Water Flow Sensor
Price: $11.67
View
Availability: Stocked
Elecrow Item #: EL-SOT80012WF -

Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor and a hall-effect sensor. When water flows through the rotor, rotor rolls, it activates the magnetic core to trigger switch action speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signals, users can get the flow speed via detecting the pulse. It is suitable to detect flow in water dispenser or coffee machine. There are also lots of other water flow sensors...

PIR Motion Sensor Module
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-SOD00101S -

This is a highly integrated module popularly used for entry detection, it can simplely and easily to adopt in system. There are two adjustable potentiometer on the module, you can use them to change the trigger sensitivity and the duration of the trigger signal.SpecificationInput Voltage: DC 4.5-20VStatic current: 50uAOutput signal: 0,3V or 5V (Output high when motion detected)Sentry Angle: 110 degreeSentry Distance: max 7 mShunt for setting overide trigger: H - Yes, L - NoWiki & External...

Triple Axis Accelerometer & Gyro Breakout - MPU-6050
Price: $13.77
View
Availability: Stocked
Elecrow Item #: EL-SPS06050S -

The MPU-6050 is a serious little piece of motion processing tech! By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor(DMP) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts.SpecificationI2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data formatInput...

RTC& EEPROM Module DS3231 AT24C32
Price: $3.45
View
Availability: Stocked
Elecrow Item #: EL-SMI3231DS -

DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike the DS1307, the DS3231 also has an integrated crystal (so no external crystal required), temperature sensor, 2 programmable time-of-day alarms, a 32.768 kHz output pin to ensure higher accuracy....

G3/4" Water Flow Sensor
Price: $20.95
View
Availability: Stocked
Elecrow Item #: EL-SOT80034WF -

Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor and a hall-effect sensor. When water flows through the rotor, rotor rolls, it activates the magnetic core to trigger switch action speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signals, users can get the flow speed via detecting the pulse. It is suitable to detect flow in water dispenser or coffee machine. There are also lots of other water flow sensors...

Vibration Sensor Module - SW-420
Price: $3.45
View
Availability: Stocked
Elecrow Item #: EL-SMS10221S -

The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.Application Idea Vibration detecting Burglary protection systemFeatures The default state of the swith is close Digital output Supply voltage:3.3V-5V On-board indicator LED to show the results...

IMU 10DOF L3G4200D + ADXL345 + HMC5883L + BMP180
Price: $39.20
View
Availability: Stocked
Elecrow Item #: EL-SM080110DOF -

This IMU 1DOF is based on the sensor L3G4200D, ADXL345, HMC5883L and BMP180. The L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and sensitivity over temperature and time. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI). The ADXL345 is a small, thin, low power, three-axis accelerometer with high resolution (13-bit)...

Vibration Sensor Module - SW-18015P
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-SMS40130S -

This Vibration Sensor use the SW-18015P from MEC to measure the vibration.It can triggerd from any angle, and often used for flex, touch, vibration and shock measurements. There is an on-board potentiometer to adjust the threshold of vibration.It outputs logic HIGH when this module not triggered while logic Low when triggered. Application Idea Automobie alarm. Movement detection. Vibration detecting Applications Features The default state of the switch is open Digital output Supply...

G1/4" Water Flow Sensor
Price: $9.29
View
Availability: Stocked
Elecrow Item #: EL-SOT80014WF -

Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor and a hall-effect sensor. When water flows through the rotor, rotor rolls, it activates the magnetic core to trigger switch action speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signals, users can get the flow speed via detecting the pulse. It is suitable to detect flow in water dispenser or coffee machine. There are also lots of other water flow sensors...

Hall Sensor Module
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-SPM11042S -

This Hall Sensor Module used Hall Sensor - A3144E. The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the Hall sensor switches low and turns on when a magnetic field perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears. And the...

3 Axis Gyro-L3G4200D
Price: $22.87
View
Availability: Stocked
Elecrow Item #: EL-SMS34200D -

This is a breakout board for the L3G4200D. the L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and sensitivity over temperature and time. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI). The L3G4200D has a full scale of +/-250 / +/-500 / +/-2000 dps and is capable of measuring rates with a user-selectable bandwidth.These...

Hall Sensor - A3144E (5pcs pack)
Price: $3.45
View
Availability: Stocked
Elecrow Item #: EL-SPM31441S -

This Hall Sensor Module used Hall Sensor - A3144E. The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the Hall sensor switches low and turns on when a magnetic field perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears. And the...

SparkFun Triple Axis Accelerometer Breakout - ADXL335
Price: $24.67
View
Availability: Stocked
Sparkfun Item #: SEN-09269 -

"Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of +/-3g. There is no on-board regulation, provided power should be between 1.8 and 3.6VDC. Board comes fully assembled and tested with external components installed. The included 0.1uF capacitors...

Photo Electric Counter
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-SMS38491S -

This photoelectric counter uses a groove IR Optocoupler to detect if there is anything between the IR emiter and IR receiver. With this method, this module can detect the number of obstruction in a given time thus to detect the speed of the rotation. When the opto sensor didn\'t covered , the D0 output logic LOW, the signal indicate LED light, when the opto sensor covered, the D0 output logic HIGH and the LED off, adjust the potentiometer can adjust the sensitivity of the sensor.FeaturesWorking...

Triple Axis Accelerometer Breakout - MMA7361
Price: $13.53
View
Availability: Stocked
Elecrow Item #: EL-SPS07361S -

This is a breakout board for Freescale\'s MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external...

Thumb Joystick Module
Price: $4.62
View
Availability: Stocked
Elecrow Item #: EL-SMO57641T -

This Thumb Joystick is similar to the \'analog\' joystick on PS2 (PlayStation 2) controllers. The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module works, it outputs two analog values and a digital value. The 2 analog outputs represent the location of the two potentiometers and the digital output represents if the button has been pressed.External Link...

G1" Water Flow Sensor
Price: $27.95
View
Availability: Stocked
Elecrow Item #: EL-SOT80044WF -

Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor and a hall-effect sensor. When water flows through the rotor, rotor rolls, it activates the magnetic core to trigger switch action speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signals, users can get the flow speed via detecting the pulse. It is suitable to detect flow in water dispenser or coffee machine. There are also lots of other water flow sensors...

SparkFun Triple Axis Accelerometer and Gyro Breakout - MPU-6050
Price: $66.58
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-11028 -

"The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. Our breakout board for the MPU-6050 makes this tiny QFN package easy to work into your project. Every pin you...

Reed Switch (5pcs pack)
Price: $3.45
View
Availability: Stocked
Elecrow Item #: EL-SPM02102S -

The reed switch is an electrical switch operated by an applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. It consists of a pair of contacts on ferrous metal reeds in a hermetically sealed glass envelope. An example of a reed switch\'s application is to detect the opening of a...

9 Degrees of Freedom - MPU-9150 Breakout
Price: $60.43
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-11486 -

9 Degrees of Freedom - MPU-9150 Breakout Description: The MPU-9150 is the world’s first 9-axis MotionTracking device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it. This breakout board makes it easy to prototype with the InvenSense MPU-9150 by breaking out all the pins you need to standard 0.1" spaced headers. The board...

SparkFun Single Axis Accelerometer Breakout - ADXL193 (+/-250g)
Price: $49.29
View
Availability: Stocked
Sparkfun Item #: SEN-09332 -

"Breakout board for the low power, single axis ADXL193 MEMS accelerometer. The ADXL193 is a high-g sensor with a full scale range of ±250g! The ADXL193 can be powered from 3.5-6V. Access to the self-test pin is also provided. Note: The ADXL193 outputs an analog voltage. This voltage is in ratio to the measured acceleration and to the supply voltage. You will need some extra hardware to convert this analog signal to a usable digital one. Luckily, many uCs have a built in Analog to Digital...

3-Axis MEMS Accelerometer - MMA8452Q
Price: $4.92
View
Availability: Stocked
Sparkfun Item #: COM-10953 -

"The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. The MMA8452Q has user selectable full scales of ±2g/±4g/±8g with high pass filtered data as well as non filtered data...

Adjustable Infrared Sensor Switch
Price: $14.21
View
Availability: Out of Stock
DFRobot Item #: SEN0019 -

Adjustable Infrared Sensor Switch This is an infrared distance switch. It has an adjustable detection range, 3cm - 80cm.  It is small, easy to use/assemble, inexpensive. Useful for robot, interactive media, industrial assembly line, etc.   Specification Power supply: 5V Current:100mA Range:3-80cm adjustable Red: +5V; Yellow:Signal;Green:GND ...

Advance Sensor Set for Arduino
Price: $128.85
View
Availability: Out of Stock
DFRobot Item #: KIT0011 -

Advance Sensor Set for Arduino Introduction If you want to start playing with sensors, this kit will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors such as light, gas, sound, touch, accelerometer and lots more which gives unlimited possibility to sensor the physical world.    The wiki for these sensors and devices makes it easy to start learning. So save by purchasing them together and start experimenting...

Crash sensor(Left)
Price: $5.18
View
Availability: Out of Stock
DFRobot Item #: SEN0138-L -

Crash sensor(Left) Introduction A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be...

Crash sensor(Right)
Price: $5.18
View
Availability: Out of Stock
DFRobot Item #: SEN0138-R -

Crash sensor(Right) Introduction A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be...

Digital Infrared motion sensor
Price: $15.73
View
Availability: Out of Stock
DFRobot Item #: SEN0018 -

Digital Infrared motion sensor This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. Specification Type: Digital Supply Voltage:3_5V Current:50μA Working temperature:0___70_ Output level(HIGH):4V Output level(LOW):0.4V Detect angle:110 Degree Detect distance:7 meters Size:28mm×36mm Weight:25g ...

Digital Tilt Sensor (Arduino Compatible)
Price: $8.00
View
Availability: Out of Stock
DFRobot Item #: DFR0028 -

Digital Tilt Sensor (Arduino Compatible) Introduction This is a digital tilt switch. It  can be used as a simple tilt sensor.  Simple plug to our IO/Sensor Expansion board, you can make amazing interactive projects.  Specification Interface Type: Digital Pin definitions: (1) output (2) power supply (3) ground Documents  Manual   Shipping List Sensor (1 unit) Digital Sensor Cable (1 unit) (SKU:FIT0011) ...

Digital Vibration Sensor
Price: $6.90
View
Availability: Out of Stock
DFRobot Item #: DFR0027 -

Digital Vibration Sensor This vibration sensor is just as its name which is able to detect weak vibration signals.   Comes with a cable too and will plug directly into the IO Expansion shield.   Specification IO Type: Digital Switch life: up to 10 million seconds Open circuit resistance: 10Mohm More Info from teh DFRobot Wiki ...

Joystick Module
Price: $13.80
View
Availability: Out of Stock
DFRobot Item #: DFR0061 -

Joystick Module Introduction Lots of robot projects need joystick. This module provides a affordable solution to that.  Simply connect  to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin.  This joystick module can be easily connect to Arduino by our IO Expansion Shield with supplied cables. Specification Three axis (X,Y,Z(button)) Size:37x25x32mm Weight: 15 gram Documents WikiDoc...

Joystick Shield for Arduino
Price: $29.87
View
Availability: Stocked
Elecrow Item #: EL-ACS77312JS -

The Joystick Shield enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. This shield is a great piece of uer interface board, it is perfect for gaming and navigating through menu quickly. It has headers for LCDs and RF modules , to communicating and displays easily....

Line Tracking Sensor for Arduino
Price: $11.50
View
Availability: Out of Stock
DFRobot Item #: SEN0017 -

Line Tracking Sensor for Arduino Introduction This sensor is for line tracking purpose.  It detects white and black colour, and it outputs via TTL signal. You can even combine several sensors to meet your specific requirements.  Specification Power supply: +5V Operating current: Operating temperature range: 0°C ~ + 50°C 3-wire output interface Output: TTL(Black for LOW output, White for HIGH output) ...

Piezo Disk Vibration Sensor
Price: $8.14
View
Availability: Out of Stock
DFRobot Item #: DFR0052 -

Piezo Disk Vibration Sensor Introduction The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration. Specification Power supply:5V Interface:Analog Documents Wiki Doc ...

SparkFun 6 Degrees of Freedom IMU Digital Combo Board - ITG3200/ADXL345
OOD!
Price: $65.74
View
Availability: Back Order
Sparkfun Item #: SEN-10121 -

"This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate over I2C and one INT output pin from each sensor is broken out. If you need a simple and tiny board that gives you 6 degrees of freedom, this would be a good choice. Having a hard time picking an IMU? Our Accelerometer, Gyro, and IMU Buying Guide might help! Features: Tiny! Two mounting holes ADXL345 accelerometer ITG-3200 gyro 3.3V...

SparkFun 9DoF Razor IMU M0
OOD!
Price: $80.00
View
Availability: Back Order
Sparkfun Item #: SEN-14001 -

"The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, reprogrammable, multipurpose IMU (Inertial Measurement Unit). It can be programmed to monitor and log motion, transmit Euler angles over a serial port or even act as a step-counting pedometer. The 9DoF Razor’s MPU-9250 features three 3-axis sensors—an accelerometer, gyroscope and magnetometer—that give it the ability to sense linear...

SparkFun 9DoF Sensor Stick
Price: $24.67
View
Availability: Stocked
Sparkfun Item #: SEN-13944 -

"The SparkFun 9DoF Sensor Stick is an easy-to-use 9 Degrees of Freedom IMU. The Sensor Stick deftly utilizes the LSM9DS1 motion-sensing system-in-a-chip, the same IC used in the SparkFun 9DoF IMU Breakout. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine degrees of freedom (9DoF) in a single IC! The onboard LSM9DS1 is equipped with a digital interface, but even that is flexible. The biggest difference between the two boards, besides the slimmed down...

SparkFun IMU Breakout - MPU-9250
OOD!
Price: $24.67
View
Availability: Back Order
Sparkfun Item #: SEN-13762 -

"The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. Each of these 9DoF breakouts feature an MPU-9250 with a System in Package (SiP) that combines two chips: the MPU-6500, which contains a 3-axis gyroscope as well as a 3-axis accelerometer, and the AK8963, which features a 3-axis magnetometer. This breakout has been designed to be smaller than some of our other offerings to fit in smaller projects. However, if you plan to use a breadboard, or secure the...

SparkFun RedBot Sensor - Accelerometer
OOD!
Price: $16.37
View
Availability: Back Order
Sparkfun Item #: SEN-12589 -

"The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration forces on the x, y, and z axis. By measuring the amount of acceleration (or lack there of) your robot can get a better understanding of its movements. The sensor has two 2x3 headers (one male and one female) which connect directly to the RedBot Mainboard giving you the ability to stack another I2C sensor. Just use the included RedBot library to detect bumps...

SparkFun Tri-Axis Gyro Breakout - L3G4200D
OOD!
Price: $82.20
View
Availability: Back Order
Sparkfun Item #: SEN-10612 -

"This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D is a MEMS motion sensor and has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and virtual reality input devices, GPS navigation systems and robotics. Not sure which gyro is right for you? Our Accelerometer and Gyro Buying Guide might help! Features: Three selectable full scales (250/500/2000...

SparkFun Triple Axis Accelerometer Breakout - ADXL337
OOD!
Price: $16.42
View
Availability: Back Order
Sparkfun Item #: SEN-12786 -

"The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration with a full-scale range of ±3g. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. The breakout is perfect for applications like, disk drive protection, game controllers, and image stabilization. Getting the ADXL337 Breakout set-up is easy. Simply supply the accelerometer with power (3.3V...

SparkFun Triple Axis Accelerometer Breakout - ADXL345
Price: $29.92
View
Availability: Stocked
Sparkfun Item #: SEN-09836 -

"This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from...

SparkFun Triple Axis Accelerometer Breakout - ADXL362
OOD!
Price: $24.60
View
Availability: Back Order
Sparkfun Item #: SEN-11446 -

"We’ve been using and selling Analog Devices' ADXL accelerometers for a good while now, and now we’ve found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power consumption levels. It measures both dynamic acceleration, resulting from motion or shock, and static acceleration, such as tilt. It’s easy to communicate with the ADXL362 over SPI and built-in digital logic even enables autonomous...

SparkFun Triple Axis Accelerometer Breakout - ADXL377
OOD!
Price: $41.17
View
Availability: Back Order
Sparkfun Item #: SEN-12803 -

"The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range of ±200g for measuring more extreme changes in motion, shock or vibration. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. The breakout is perfect for applications like concussion and head trauma detection or high force event detection. Getting the ADXL377 Breakout set-up is easy....

SparkFun Triple Axis Accelerometer Breakout - LIS331
OOD!
Price: $16.37
View
Availability: Back Order
Sparkfun Item #: SEN-10345 -

"This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. All major pins are broken out to 0.1" spaced headers. It also includes two mounting holes as well. The LIS331HH is an ultra low-power full-scale three axis MEMS linear accelerometer. It has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. The device also...

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q
OOD!
Price: $16.37
View
Availability: Back Order
Sparkfun Item #: SEN-12756 -

"This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. The MMA8452Q has user selectable full scales of...

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers)
Price: $17.31
View
Availability: Stocked
Sparkfun Item #: BOB-13926 -

"This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart, low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. Due to popular demand, this version of the...