Products 97-144 of 230
Show
Nomad MDF Waste Board (Qty 4)
OOD!
Price: $62.60
View
Availability: Back Order
Sparkfun Item #: PRT-14904 -

"Are you accidentally damaging your CNC while milling? By mounting these 8 inch by 8 inch wasteboards to your CNC you won’t have to worry about cutting through a piece of flat stock and ruining the mill table underneath! Essentially, let the inexpensive wasteboard take the damage rather than your expensive CNC mill. These wasteboards come in packs of four, are made of ½ inch MDF (medium-density fibreboard), and have predrilled holes and countersinks to make it easy to mount right...

Nomad Threaded Table
OOD!
Price: $250.42
View
Availability: Back Order
Sparkfun Item #: TOL-14794 -

"If you need more ways to hold material in your Nomad, this Threaded Table provides you with plenty of connection points. Each Nomad Threaded Table is approximately 8in by 8in (~203mm by ~203mm) and ½" (12.7mm) thick and contains 72 M6x1 threaded holes. With as many connection points that the threaded table has, you will have plenty of possible configurations to mill and fabricate with! The Nomad Threaded Table comes with the table and five M6 screws to attach it to your Nomad 883 Pro....

Non-Contact Infrared Thermometer
Price: $48.60
View
Availability: Stocked
Sparkfun Item #: TOL-10830 -

"This non-contact infrared thermometer makes it a breeze to take quick and accurate surface temperature readings without getting too close for comfort. Laser sighting ensures that you’re pointing at the right spot: Simply pull the trigger and line up the laser dot where you want to measure the temperature. The temp gun also has adjustable emissivity compensation for measuring the surface temp of more or less radiant objects. Features: Single-Spot Laser Sighting Adjustable Emissivity...

Nut - Metal (2-56)
OOD!
Price: $0.26
View
Availability: Back Order
Sparkfun Item #: PRT-08995 -

"Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units."

Nut - Metal (4-40, 10 pack)
Price: $2.61
View
Availability: Stocked
Sparkfun Item #: PRT-10454 -

"We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And how each nut’s dimensional variations can only be measured on the sub-atomic level. We could say all that, but it would be a lie. These are standard...

Nut - Metal (6-32, 25 pack)
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-12917 -

"Have you heard the story of how our other Zinc plated nuts come only from some sort or “metal tree” or how their dimensional variations can only be measured on the mysterious “sub-atomic” level? We hate to break it to you but these particular nuts are no different, they are quite ordinary and common. On the bright side, these 6-32 metal nuts are really handy. Not to mention they can be used with our Actobotics products and any of our 6-32 screws! Note: These come in...

Nut - Nylon Locknut (4-40, 10 pack)
Sale!
Price: $2.61
View
Availability: Stocked
Sparkfun Item #: PRT-10460 -

"Description: These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place. Note: These come in packs of 10."

Nylon Cable Tie Set - Five Colors(50pcs)
OOD!
Price: $1.03
View
Availability: Back Order
DFRobot Item #: FIT0343 -

A bunch of colorful nylon cable ties that help you bundle up things and make your project tidy. Comes in five vivid colors. They are: Faster - low insertion and pull through force Stronger - high tensile strength is achieved from one piece, advanced pawl, and teeth design Purer - manufactured from filtered Cable Ties reducing particle contamination Easier - angled tail provides quicker insertion alignment and tail finger grips allow easier handling and tightening Safer - rounded edges provides...

Nylon Cable Tie Set - With Tag (10pcs)
OOD!
Price: $1.03
View
Availability: Back Order
DFRobot Item #: FIT0344 -

These nylon cable ties will help you bundle up things and make your project tidy. Each comes in white color. They are: Faster - low insertion and pull through force Stronger - high tensile strength is achieved from one piece, advanced pawl, and teeth design Purer - manufactured from filtered Cable Ties reducing particle contamination Easier - angled tail provides quicker insertion alignment and tail finger grips allow easier handling and tightening Safer - rounded edges provides added safety...

Panavise Jr. - Vacuum Base
OOD!
Price: $60.17
View
Availability: Back Order
Sparkfun Item #: TOL-10410 -

"The Panavise Jr. is a great vise with a vacuum base. Its jaws open up to about 3" and have grooves for PCBs. It’s perfect for light duty field repairs, electronics, hobby and dozens of other projects. This is an exceptionally lightweight, portable vise that firmly attaches to any flat, smooth non-porous surface. A single knob locks the head into position, while a second knob locks the arm at the angle you select."

PCB Engraver - #501 (2 Pack)
OOD!
Price: $83.47
View
Availability: Back Order
Sparkfun Item #: TOL-14816 -

"This is a two pack of #501 PCB engravers from Carbide 3D for your Shapeoko or Nomad CNC machine to supply you with even more fabrication and milling options. Each PCB engraver possesses a 0.1" ball tip with a 0.005" radius, a 60 degree tip angle, and is made of solid carbide to ensure long lasting use. If you are wondering how best to utilize this kit, make sure to check out the free to use web app, Carbide Copper. Carbide Copper is CAM software to let you mill PCBs with your CNC machine and...

PCB Engraver - #502 (2 Pack)
OOD!
Price: $83.47
View
Availability: Back Order
Sparkfun Item #: TOL-14815 -

"This is a two pack of #502 PCB engravers from Carbide 3D for your Shapeoko or Nomad CNC machine to supply you with even more fabrication and milling options. Each PCB engraver possesses a 0.005" ball tip with a 0.0025" radius, a 40 degree tip angle, and is made of solid carbide to ensure long lasting use. If you are wondering how best to utilize this kit, make sure to check out the free to use web app, Carbide Copper. Carbide Copper is CAM software to let you mill PCBs with your CNC machine...

PCB Machining Kit
OOD!
Price: $250.42
View
Availability: Back Order
Sparkfun Item #: TOL-14814 -

"Do you want to get started in PCB machining or have you been curious where to start? The PCB Machining Kit from Carbide 3D includes all of the drills, cutters, and copper material you need to start creating your own PCBs on your home CNC machine right away! Inside each PCB Machining Kit you will find one standard PCB drill set, one variety PCB drill set, #501 and #502 PCB engravers, and 10 units of four different copper sheets. If you are wondering how best to utilize this kit, make sure to...

PLA Filament 3mm - 1kg (Black)
Price: $89.63
View
Availability: Back Order
Sparkfun Item #: TOL-12951 -

"This is a 1kg (2.2lb) reel of 3mm black PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general purpose filament with smooth surface finish. This filament is very easy to print and is even biodegradable! PLA has minimal warping and shrinking compared with other materials, which means it thrives when making objects featuring flat surfaces and hard angles, or requiring tight tolerances for fit. PLA filament has been commonly used in situations...

Pocket Screwdriver Set
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: TOL-12891 -

"What should every hacker have available to them? That’s right, a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you need them. This Pocket Screwdriver Set provides you with just that service in a small, portable package. Each Pocket Screwdriver Set offers 7 different chrome vanadium bits, four flathead options and three Phillips head options, that fit...

Polymorph - 1000g
OOD!
Price: $60.78
View
Availability: Back Order
Sparkfun Item #: TOL-10951 -

"Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it becomes a nylon-like white plastic. Polymorph can be re-used by simply re-heating and re-shaping. Plastic beads are supplied in a re-usable plastic container. So what do you do with it? Robotics,...

Polymorph - 250g
OOD!
Price: $17.30
View
Availability: Stocked
Sparkfun Item #: TOL-10950 -

"Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it becomes a nylon-like white plastic. Polymorph can be re-used by simply re-heating and re-shaping. Plastic beads are supplied in a heat-sealed plastic bag to prevent spillage during transport. So what do you...

Power Supply - 54W, 9V
OOD!
Price: $39.54
View
Availability: Back Order
Sparkfun Item #: TOL-14933 -

"This power supply is a highly reliable desktop style single-output green adapter. It is designed with a low/no load power consumption (less than 0.075W) and an average operating efficiency up to 92%!. This power supply is able to better fulfill energy saving and carbon reduction, either in no load, or operating mode and meet energy efficiency regulation level VI. This is a class I power unit, equipped with an AC inlet and adopting the input range from 90VAC to 264VAC Features: 30 W output 5V...

Power Supply - 60W, 12V
OOD!
Price: $39.54
View
Availability: Back Order
Sparkfun Item #: TOL-14934 -

"This power supply is a highly reliable desktop style single-output green adapter. It is designed with a low/no load power consumption (less than 0.075W) and an average operating efficiency up to 92%!. This power supply is able to better fulfill energy saving and carbon reduction, either in no load, or operating mode and meet energy efficiency regulation level VI. This is a class I power unit, equipped with an AC inlet and adopting the input range from 90VAC to 264VAC Features: 60 W output 12V...

Power Supply - Multi-Range DC 42V, 20A
OOD!
Price: $1,043.38
View
Availability: Back Order
Sparkfun Item #: TOL-14927 -

"This Multi-Range DC Power Supply from B&K Precision is capable of replacing several power supplies on your work bench by offering extended operating areas. Unlike conventional supplies with fixed output ratings, this power supply automatically recalculates voltage and current limits for each setting, providing 320W output power between zero to 42V and zero to 20A. This power supply is suitable for a wide range of applications requiring high current including production testing,...

Power Supply - Multi-Range DC 84V, 10A
OOD!
Price: $1,043.38
View
Availability: Back Order
Sparkfun Item #: TOL-14926 -

"This Multi-Range DC Power Supply from B&K Precision is capable of replacing several power supplies on your work bench by offering extended operating areas. Unlike conventional supplies with fixed output ratings, this power supply automatically recalculates voltage and current limits for each setting, providing 320W output power between zero to 84V and zero to 10A. This power supply is suitable for a wide range of applications requiring high current including production testing,...

Powerocks Magicstick 2800mAh - Silver
Retail: $39.93
Price: $10.01
View
Availability: Stocked-NoBackOrder
MK-Misc Item #: PRSilver -

Magicstick 2800mAh - Silver Rechargeable, Portable and Lightweight  This extended battery is small enough to easily fit in a purse, briefcase, backpack...even in the palm of your hand. This lightweight but powerful battery is perfect for work, vacation and everyday on-the-go. It has a modern slim, sleek, and stylish design. Its compact design makes it convenient to carry in your pocket or purse. You could even leave it plugged in to your phone. Micro USB cable and velvet bag are included....

Precision Phillips Set
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-00080 -

"Set of small, precision Phillips head screw drivers. A must have for any electronics aficionado. Phillips #1, #0. Flat 1.4, 1.8 (or 2.0), 2.4, 3.0mm."

Product Sketch T-Shirt - Large
Price: $22.52
View
Availability: Back Order
Sparkfun Item #: SWG-09244 -

"By popular demand, this is the new SparkFun T-Shirt. Black with SparkFun parts scattered around the phrase “Let Your Geek Shine” and a small SparkFun logo."

Product Sketch T-Shirt - Small
Price: $22.52
View
Availability: Back Order
Sparkfun Item #: SWG-09243 -

"By popular demand, this is the new SparkFun T-Shirt. Black with SparkFun parts scattered around the phrase “Let Your Geek Shine” and a small SparkFun logo."

Product Sketch T-Shirt - Xtra-Large
Price: $22.52
View
Availability: Back Order
Sparkfun Item #: SWG-09246 -

"By popular demand, this is the new SparkFun T-Shirt. Black with SparkFun parts scattered around the phrase “Let Your Geek Shine” and a small SparkFun logo."

Reprap Makerbot Barrel M6 X 26 Teflon Nozzle Throat for MK8
Price: $7.88
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-P3D0105EHT -

    This Extruder Hot End is spare for makerbot extruder or another 3D printer used for 1.75mm filament. Features Pipes Specifications: M6X26.5mm Material: Stainless steel (high-quality 304 stainless steel to prevent rusting) Thread:M6 Front-end thread length:5mm,the another length:18mm Length: 26.5mm ...

Resistor Lead Bending Tool
OOD!
Price: $8.35
View
Availability: Back Order
Sparkfun Item #: TOL-13114 -

"This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with an easy and reliable way to get the exact distance between two resistor leads that you need to PTH soldering. The Resistor Lead Bending Tool is two-sided, with one side offering 0.4"-1.5" spacing for ¼ Watt resistors and the other side offering 0.5"-1.5" spacing for ½ Watt resistors. We here at SparkFun use a lot of...

Roll Up Tool Bag
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-12048 -

"This durable roll up tool bag provides you with 23 pockets to store your, pliers, flush cutters, hand-held soldering iron, spent uranium rods, screw drivers, and other small hand tool that you might need to complete a project. It even has 15 elastic loops concealed underneath a flap for storing small tools. This tool bag can easily be rolled up and easily transported even when it is loaded with tools. Features: 23 Pockets 15 Elastic Loops 600D Nylon Fabric Dimensions: 13" Wide x 22" Long...

Screw - Phillip Head (M3 x 12mm, 3 pack)
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-13227 -

"These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware."

Screw - Phillips Head (1", 4-40, 10 pack)
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-10450 -

"Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware."

Screw - Phillips Head (1/2", 4-40, 10 pack)
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-10452 -

"Standard Philips-head 4-40 screws. They are ½" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware."

Screw - Phillips Head (1/4", 4-40, 10 pack)
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-10453 -

"There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware."

Screw - Phillips Head (3/4", 4-40, 10 pack)
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-10451 -

"Standard Philips-head 4-40 screws. They are ¾" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware."

Screw - Phillips Head (3/8", 2-56)
OOD!
Price: $0.26
View
Availability: Back Order
Sparkfun Item #: PRT-08993 -

"These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single units."

SD Sniffer
OOD!
Price: $19.04
View
Availability: Back Order
Sparkfun Item #: TOL-11468 -

"This board is a unique board recommended by a SparkFun customer. When playing with SD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The SD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular SD socket and a SD card into the SD holder, simple as that. Note: This product is a collaboration and a portion of each sale goes...

Self-Adjusting Wire Strippers
OOD!
Price: $32.42
View
Availability: Back Order
Sparkfun Item #: TOL-14872 -

"Let’s face it, wire strippers can be problematic to use if you aren’t sure what your doing and it could result in you accidentally wasting material. Lucky for you, there is this Self-Adjusting Wire Stripper that can take any almost any wire, place it in the head of the tool, compress the handles, and you will have a perfectly stripped wire every time. This Self-Adjusting Wire Stripper also doubles as a wire cutter and triples as an insulated and non-insulated crimper as well!...

SFE Project Notebook - 10" x 7.5" (Black, Grey Pages)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: SWG-11063 -

"After using a lot of different journals, we decided to create the one that we wanted to use. 52 pages thin, matte black flexible cover, with 1/8" grid on every page. It’s light weight, easy to pack, and has just enough pages to record all those crazy ideas. Also, we’ve altered the pages slightly, the grid is now white on grey. These really are great notebooks, we use them constantly at the office. They’re flexible enough to stuff in your backpack but rigid enough not to get...

SFE Project Notebook - 10" x 7.5" (Red, Grey Pages)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: SWG-11064 -

"After using a lot of different journals, we decided to create the one that we wanted to use. 52 pages thin, matte red flexible cover, with 1/8" grid on every page. It’s light weight, easy to pack, and has just enough pages to record all those crazy ideas. Also, we’ve altered the pages slightly, the grid is now white on grey. These really are great notebooks, we use them constantly at the office. They’re flexible enough to stuff in your backpack but rigid enough not to get...

Shaft Spacer - 1"
OOD!
Price: $2.94
View
Availability: Back Order
Sparkfun Item #: ROB-12193 -

"These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact. Dimensions: ID - 1" Width - 1/16” "

Shaft Spacer - 1/4"
Price: $2.94
View
Availability: Back Order
Sparkfun Item #: ROB-12350 -

"These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact. Dimensions: ID - ¼" Width - 1/16” "

Shaft Spacer - 3/8"
Price: $2.94
View
Availability: Back Order
Sparkfun Item #: ROB-12441 -

"These plastic shaft spacers have an inner diameter of 3/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact. Dimensions: ID - 3/8" Width - 1/16” "

Shaft Spacer - 5/8"
OOD!
Price: $2.94
View
Availability: Back Order
Sparkfun Item #: ROB-12269 -

"These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact. Dimensions: ID - 5/8" Width - 1/16” "

Shapeoko 3 CNC Machine - Mechanical Kit
Price: $1,551.97
View
Availability: Back Order
Sparkfun Item #: TOL-13713 -

"The Shapeoko 3 is a heavy duty desktop CNC machine designed to do real work, out of real materials like non-ferrous metals, hardwoods, and plastics. This special SparkFun Edition of the Shapeoko 3 CNC Machine Mechanical Kit includes the base frame and assembly hardware (screws, nuts, pulleys) to build the physical structure of your CNC. If you are looking to build your own custom gantry or wanting to upgrade an existing setup to a bigger platform check out this kit. This mechanical kit has a...

Shapeoko T-Track & Clamp Kit
OOD!
Price: $260.85
View
Availability: Back Order
Sparkfun Item #: TOL-14905 -

"This T-Track & Clamp Kit for the Shapeoko v3 is an all-in-one box filled with parts to help improve the functionality of your CNC. This versatile T-track system provides a flexible and reliable way to hold down a wide assortment of material to your standard Shapeoko v3 CNC Router. The T-track system easily attaches on top of the Shapeoko wasteboard making set-up a breeze. With this kit, you will be able to use the provided wooden clamps and hardware or even design your own custom fixtures...

Shapeoko Threaded Table
OOD!
Price: $834.72
View
Availability: Back Order
Sparkfun Item #: TOL-14908 -

"If you need more ways to hold material in your Shapeoko, this Threaded Table provides you with plenty of connection points. Each Threaded Table fits perfectly into a Shapeoko v3 CNC (but unfortunately not the XL or XXL), contains over 90 M6x1 threaded holes, and is only ½" (12.7mm) thick. With as many connection points that the threaded table has, you will have plenty of possible configurations to mill and fabricate with!"

Shapeoko Touch Probe
OOD!
Price: $250.42
View
Availability: Back Order
Sparkfun Item #: TOL-14806 -

"The Touch Probe from Carbide 3D is a small accessory piece for your Shapeoko CNC machine meant to assist in finding the edges, or datums of the part you are milling. This part is an active probe, and when contacted to ground, communicates its position to the Carbide Motion program to help you fabricate easier. Carbide Motion supports the 4 different types of probing: XYZ (otherwise known as corner probing), X (to find the left edge of your material), Y (to find the front edge of your...

Shapeoko XL T-Track & Clamp Kit
OOD!
Price: $313.02
View
Availability: Back Order
Sparkfun Item #: TOL-14906 -

"This T-Track & Clamp Kit for the Shapeoko XL is an all-in-one box filled with parts to help improve the functionality of your CNC. This versatile T-track system provides a flexible and reliable way to hold down a wide assortment of material to your Shapeoko XL CNC Router. The T-track system easily attaches on top of the Shapeoko wasteboard making set-up a breeze. With this kit, you will be able to use the provided wooden clamps and hardware or even design your own custom fixtures to hold...