Products 145-192 of 228
Show
Smart SMD Tester
OOD!
Price: $48.60
View
Availability: Back Order
Sparkfun Item #: TOL-10829 -

"This smart SMD tester is essentially a pair of multimeter tweezers. This allows you to troubleshoot circuits with small SMD parts without having to fumble with large probes or long wires. Test resistors, capacitors and diodes one-handed! Features: Resistance Range: 300Ω/3KΩ/30KΩ/300KΩ ±(1.0%+5) 3M/30MΩ ±(2%+5) Capacitance Range: 3n/30n/300n/3µ/30µ/300µF ±(3%+5) 3000µ/30000µF ±(5%+5) Powered by One CR2032 Button Cell...

SMD Tweezers - 45 Angle
OOD!
Price: $52.07
View
Availability: Back Order
Sparkfun Item #: TOL-14224 -

"These unique tweezers have been specially designed to be used with vertical applications of SMD ICs. The tips of these tweezers have tiny prongs been bent to a 45° angle to facilitate access to confined spaces and provide excellent visibility of the area to be worked on. Whether you are moving tiny SMD ICs or soldering them onto a PCB, these tweezers should be your go-to choice to help! Each set of tweezers is made from stainless steel that is nonmagnetic, nonrusting, acid-proof and...

Solder - 1/4lb Spool (0.020") Special Blend
OOD!
Price: $52.08
View
Availability: Back Order
Sparkfun Item #: TOL-10242 -

"We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the best we’ve tried. The best part is that it’s lead free and has a water-soluble flux core. This package contains 1/4lb of solder and has a diameter of 0.020" (0.5mm). Mix: 96.35%...

Solder - 1/4lb Spool (0.032") Special Blend
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: TOL-10243 -

"We don’t want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we’ve said it. This is a special blend made specifically for us and we love it. It all started as a quest to find the best solder to use in our production process and ended up being the best we’ve tried. The best part is that it’s lead free and has a water-soluble flux core. This package contains 1/4lb of solder and has a diameter of 0.032" (0.8mm). Mix: 96.35%...

Solder Lead Free - 100-gram Spool
Price: $13.83
View
Availability: Back Order
Sparkfun Item #: TOL-09325 -

"This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solder, we recommend you order the leaded solder. Lead-free solder is a bit harder to use (does not flow as well). Mix: 99.3% Sn / 0.7% Cu Documents: MSDS " ...

Solder Lead Free - 15-gram Tube
Price: $6.09
View
Availability: Stocked
Sparkfun Item #: TOL-09163 -

"This is your basic tube of unleaded (Pb-free) solder with a 60/40 no clean, water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper"

Solder Leaded - 100-gram Spool
OOD!
Price: $10.35
View
Availability: Back Order
Sparkfun Item #: TOL-09161 -

"This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb"

Solder Leaded - 15-gram Tube
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: TOL-09162 -

"This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb"

Solder Paste - 50g (Lead Free)
OOD!
Price: $29.48
View
Availability: Back Order
Sparkfun Item #: TOL-12878 -

"This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way to solder some of the trickier SMD components. Here at SparkFun, we use solder paste stenciling on pretty much all of our boards. It saves us a lot of time. But stenciling takes more than just a stencil and a dream… you’re going to need some paste. The composition of...

Solder Tip Polishing Bar
OOD!
Price: $22.52
View
Availability: Back Order
Sparkfun Item #: TOL-14233 -

"Do you need to remove the oxidation and surface contamination from your soldering iron tip? The Solder Tip Polishing Bar allows you to do just that! This bar provides a great way to bring your older or neglected soldering tips back from the dead. Just make sure the tip is cold, give it a good scrubbing with this bar, and you’re all set! It is important to immediately tin the just-polished tip to avoid oxidation. Note: Only use this polishing bar when the soldering tip is cool. Do NOT...

Solder Tip Tinner and Cleaner
Price: $18.17
View
Availability: Back Order
Sparkfun Item #: TOL-13246 -

"Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid, it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your soldering tip when not in use. Comes in a sealed 20 gram disk. This tinner is Lead Free. Documents: MSDS Product Video " ...

Solder Vacuum
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: TOL-13203 -

"The Solder Vacuum, a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The piston pops up and the solder disappears! This solder vacuum has a black metal body with a hard plastic nozzle and buttons."

Solder Wick #2 25ft. - TechSpray
OOD!
Price: $35.37
View
Availability: Back Order
Sparkfun Item #: TOL-08775 -

"Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone’s diagonal cutters for a minute, but you’d better ask before touching their solder wick. Solder wick is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process....

Solder Wick #2 5ft. - Generic
Price: $4.33
View
Availability: Stocked
Sparkfun Item #: TOL-09327 -

"Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone’s diagonal cutters for a minute, but you’d better ask before touching their solder wick.[ Solder wick](http://en.wikipedia.org/wiki/Solder_wick) is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and...

Solder-Mate Solder Dispenser
Price: $20.78
View
Availability: Back Order
Sparkfun Item #: TOL-14232 -

"The Solder-Mate™ Solder Dispenser provides you with an easy way to, well…dispense solder! This handy tool provides a continuous supply of solder (until the roll runs out, that is), freeing up hand space and minimizing downtime. Each solder dispenser can hold up to a 1lb solder spool. This is a great addition to any workbench! Note: Solder is NOT included with the Solder-Mate and will need to be purchased separately."

Soldering Tip - Hakko - Conical (T18-B)
OOD!
Price: $13.83
View
Availability: Back Order
Sparkfun Item #: TOL-10721 -

"This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a conical type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw the shield back on. Note: This is the tip that ships with the FX-888. Documents: Dimensional Drawing " ...

Soldering Tip - Plug Type - Conical 1/64"
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-09538 -

"This is a replacement soldering tip for our 30W Soldering Iron. This is a conical type of soldering tip, and is the same version that originally comes with the soldering iron. Replacing the tip is very easy - simple unscrew the shield, slip the replacement tip in, and screw the shield back on. The overall width of this tip is 1/64". This tip will only work with the soldering iron listed below." ...

Soldering Tip - Weller - Conical (ETT)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14737 -

"This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. Each conical-type tip measures 0.02" (0.6mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip, slip the replacement tip in, and screw it into place. The conical Weller tip has been pre-tinned with a lead-free alloy. Videos " ...

Soldering Tip - Weller - Conical (ST6)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14231 -

"This is a replacement soldering tip for the Weller WLC100 soldering iron. Each conical-type tip measures 0.031" (0.79mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip with a flat-head screwdriver, slip the replacement tip in, and screw it into place. The conical Weller tip has been pre-tinned with a lead-free alloy."

Soldering Tip - Weller - Flat (ST3)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14230 -

"This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a flat type of soldering tip, measuring 0.125" (3.17mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip with a flat-head screwdriver, slip the replacement tip in, and screw it into place. The flat Weller tip has been pre-tinned with a lead-free alloy. Note: This is the tip that ships with the WLC100 Soldering Station." ...

Soldering Tip - Weller - Screwdriver (ETA)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14735 -

"This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. It is a “screwdriver” type of soldering tip, measuring 1/16" (1.6mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip, slip the replacement tip in, and screw it into place. This Weller tip has been pre-tinned with a lead-free alloy. Although this soldering tip is called a “screwdriver,” this is in name only and functions in no way similar to the...

Soldering Tip - Weller - Single Flat (ETCC)
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14736 -

"This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. It is a single flat type of soldering tip, measuring 1/8" (3.17mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip, slip the replacement tip in, and screw it into place. The single flat Weller tip has been pre-tinned with a lead-free alloy. Videos " ...

Soldering Tip - Weller - Standard (ST1)
OOD!
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: TOL-14229 -

"This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a standard type of soldering tip, measuring 0.062" (1.58mm) wide. Replacing the tip is a breeze — simply unscrew the currently attached tip with a flat-head screwdriver, slip the replacement tip in, and screw it into place. The standard Weller tip has been pre-tinned with a lead-free alloy."

SolderPro 50 Butane Soldering Iron Kit
Price: $51.04
View
Availability: Back Order
Sparkfun Item #: TOL-09450 -

"The SolderPro 50 is an awesome little pocket-sized, butane-powered soldering iron. Soldering temperature is adjustable between 410-750?F. This thing is versatile too, with the torch tip you can use it as a soldering torch reaching a heat of up to 2400?F. They’re ready to use quickly - less than 20 seconds after ignition - and can run for up to 30 minutes on a single tank of butane. These soldering irons are completely cordless and would be very useful for field repairs. As a bonus,...

SparkFun DC/DC Converter Breakout
OOD!
Price: $55.56
View
Availability: Back Order
Sparkfun Item #: BOB-09370 -

"This is a breakout board for our non-isolated, 6A DC-to-DC Converter Module. The module can convert any DC voltage between 4.5-14VDC to a selectable voltage between 0.59 and 5.5VDC. To set the output voltage to the desired level, a resistor must be added between the Trim and GND pins. For example, to set the module to output 5V use a 1.34kΩ resistor, or to get 3.3V use a 2.182kΩ. See table 1 in the module’s datasheet for more resistor values. The ON/OFF pin on the board can be...

SparkFun Hoodie - 2X-Large
OOD!
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: SWG-08741 -

"Stay warm, outdoors! High quality hoodie with front pocket. Large logo on the front, blank back. If you’re shopping for the quintessential American Nerd, the SparkFun Hoodie might be the perfect gift. For other great gift ideas, check out our SparkFun Gift Guide! Documents: Sizing Chart " ...

SparkFun Hoodie - Medium
OOD!
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: SWG-08345 -

"Stay warm, outdoors! High quality hoodie with front pocket. Large logo on the front, blank back. If you’re shopping for the quintessential American Nerd, the SparkFun Hoodie might be the perfect gift. For other great gift ideas, check out our SparkFun Gift Guide! Documents: Sizing Chart " ...

SparkFun Hoodie - Small
OOD!
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: SWG-08346 -

"Stay warm, outdoors! High quality hoodie with front pocket. Large logo on the front, blank back. If you’re shopping for the quintessential American Nerd, the SparkFun Hoodie might be the perfect gift. For other great gift ideas, check out our SparkFun Gift Guide! Documents: Sizing Chart " ...

SparkFun Hoodie - Xtra-Large
OOD!
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: SWG-08344 -

"Stay warm, outdoors! High quality hoodie with front pocket. Large logo on the front, blank back. If you’re shopping for the quintessential American Nerd, the SparkFun Hoodie might be the perfect gift. For other great gift ideas, check out our SparkFun Gift Guide! Documents: Sizing Chart " ...

SparkFun microSD Sniffer
OOD!
Price: $19.04
View
Availability: Back Order
Sparkfun Item #: TOL-09419 -

"This is a unique board recommended by a SparkFun customer. When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The SparkFun microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that. All necessary pins are broken out to an 8-pin 0.1"...

SparkFun Mini Screwdriver
Price: $1.65
View
Availability: Stocked
Sparkfun Item #: TOL-09146 -

"This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo."

SparkFun Resistor Chart Sticker
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: SWG-10108 -

"This handy resistor code sticker allows you to decipher the color coded bands on resistors and determine their value. It measures about 4" x 5" and is adhesive-backed for sticking to your wall, workbench, or coworker. Features: Red background with white contrast lettering Adhesive-backed Highly portable Lightweight Reliable Negligible error rate Extremely low power consumption "

SparkFun S.H.O.V.E.L.
OOD!
Price: $20.76
View
Availability: Back Order
Sparkfun Item #: TOL-11763 -

"Introducing the Semi-Horned Oblong Versatile Eating Ladle, or as we like to call it, the S.H.O.V.E.L. This is not your run-of-the-mill spork (foon), ladies and gentlemen! It also has a serrated knife, a bottle cap opener, and six feet of red paracord to wrap around its sturdy titanium body. Here’s the best part: it’s open-sourced. (No, we aren’t joking.) We want to show the world that OSHW is not just circuits and PCBs. The idea of open source can be applied to just about...

SparkFun Safety Glasses
OOD!
Price: $8.61
View
Availability: Stocked
Sparkfun Item #: SWG-11046 -

"These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your vision… dangerously. Here our photographer, Juan, is helping our receiving guru, TJ, relive his glory days as a teenage heart-throb boy-band front-man and Goggles Magazine cover model… It’s unsettling at best. Features: Just look at them, they’re glorious. UV 400 Meets CE standard 1836 Documents: Product Video...

SparkFun Third Hand Kit
Price: $60.78
View
Availability: Stocked
Sparkfun Item #: TOL-11784 -

"Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board between two alligator clips on two flexible arms with multiple points of articulation. The arm’s wide range of articulation gives you access to any angle of the board that you are currently working on, making soldering that much easier. The SparkFun Third Hand also won’t move around while you work thanks to a heavy aluminum base supporting the arms....

SparkFun Third Hand Parts
Price: $3.91
View
Availability: Stocked
Sparkfun Item #: TOL-12033 -

"This parts kit allows you to modify a coolant hose into an additional hand for your SparkFun Third Hand. It includes the alligator clips and hardware necessary to repair a broken hand, or make a new one. Note: A portion of this sale is given to Ryan for inspiring the design with his Instructable. Includes: 2x Alligator Clips 2x 1" 6-32 Phillips Pan Head Machine Screws 2x 50 x 4mm Heat Shrink Wraps " ...

SparkFun USB Thumb Drive (16GB)
OOD!
Price: $20.76
View
Availability: Back Order
Sparkfun Item #: SWG-14658 -

"With the cost of microSD cards on a consistent rise, it’s always useful to have an economical and reliable option as a backup for storing your files. This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something! Each thumb drive features a removable cap that protects the USB connector, a key loop to attach the drive to a key chain or lanyard, as well as a status LED to let you know when it is connected. Since the term...

SparkFun Womens Tee Gray - 2X-Large
Price: $26.00
View
Availability: Back Order
Sparkfun Item #: SWG-11599 -

"Too long have you suffered at the hem of shapeless, boxy t-shirts! Finally, we’re stocking our popular SparkFun Tees in women’s sizes. Wrap your torso with this stylish cotton shirt and Let your Geek shine!"

SparkFun Womens Tee Gray - Medium
Price: $26.00
View
Availability: Back Order
Sparkfun Item #: SWG-11596 -

"Too long have you suffered at the hem of shapeless, boxy t-shirts! Finally, we’re stocking our popular SparkFun Tees in women’s sizes. Wrap your torso with this stylish cotton shirt and Let your Geek shine!"

Spiral Cable Wrap (12mm)
OOD!
Price: $5.00
View
Availability: Back Order
DFRobot Item #: FIT0251 -

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they&;#39;ve already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is available upon request. Please contect Sales for details. |Specification| Color: white Length: 1m(39.37") inner diameter: 12mm(0.47") |ShippingList| Spiral cable guide x1 ...

Standard PCB Drill Set (10 Pieces)
OOD!
Price: $41.74
View
Availability: Back Order
Sparkfun Item #: TOL-14817 -

"This is standard PCB Drill Set from Carbide 3D that supplies you with more options for drilling into copper clad on your Shapeoko or Nomad CNC machines. Each set includes three 0.5mm, five 0.7mm, and two 0.9mm PCB drills each with a 0.125" shank. Additionally, each drill is made of solid carbide to ensure long lasting use. If you are wondering how best to utilize this kit, make sure to check out the free to use web app, Carbide Copper. Carbide Copper is CAM software to let you mill PCBs with...

Standoff - Aluminum Threaded (6-32; 1", 4 Pack)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: ROB-13134 -

"These threaded aluminum standoffs are 1" long and have a thread pitch of 6-32, and an outer diameter of 0.25”. Note: These standoffs are sold in packs of 4. Dimensions: Length - 1" Thread Pitch - 6-32 "

Standoff - Aluminum Threaded (6-32; 1-1/2", 4 Pack)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: ROB-13128 -

"These threaded aluminum standoffs are 1-1/2” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. Note: These standoffs are sold in packs of 4. Dimensions: Length - 1-1/2” Thread Pitch - 6-32 "

Standoff - Aluminum Threaded (6-32; 1-1/8", 4 Pack)
Price: $5.13
View
Availability: Back Order
Sparkfun Item #: ROB-13129 -

"These threaded aluminum standoffs are 1-1/8” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. Note: These standoffs are sold in packs of 4. Dimensions: Length - 1-1/8” Thread Pitch - 6-32 "

Standoff - Aluminum Threaded (6-32; 1/2", 4 Pack)
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: ROB-13139 -

"These threaded aluminum standoffs are 1/2” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. Note: These standoffs are sold in packs of 4. Dimensions: Length - 1/2” Thread Pitch - 6-32 "

Standoff - Metal (4-40; 3/8"; 10 pack)
Price: $5.13
View
Availability: Stocked
Sparkfun Item #: PRT-10739 -

"Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Set of ten"

Standoff - Nylon (4-40; 3/4"; 10 pack)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: PRT-11796 -

"These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of ten. Check below for matching screws."

Standoff - Nylon (4-40; 3/8"; 10 pack)
OOD!
Price: $5.13
View
Availability: Back Order
Sparkfun Item #: PRT-10927 -

"These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screws."