Products 193-230 of 230
Show
Standoff - Metal (4-40; 3/8"; 10 pack)
Price: $5.13
View
Availability: Stocked
Sparkfun Item #: PRT-10739 -

"Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Set of ten"

Standoff - Nylon (4-40; 3/4"; 10 pack)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: PRT-11796 -

"These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of ten. Check below for matching screws."

Standoff - Nylon (4-40; 3/8"; 10 pack)
OOD!
Price: $5.13
View
Availability: Back Order
Sparkfun Item #: PRT-10927 -

"These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screws."

Standoff - Swage - (0.218")
Price: $1.04
View
Availability: Back Order
Sparkfun Item #: PRT-08985 -

"0.218" tall, brass swage attachable stand off. Non-threaded."

Standoff - Swage - (0.3125")
Price: $1.04
View
Availability: Back Order
Sparkfun Item #: PRT-08984 -

"0.3125" tall, brass swage attachable stand off. Non-threaded."

Standoffs Plastic (4-40; 3/8"; 10 pack)
Price: $5.13
View
Availability: Stocked
Sparkfun Item #: PRT-10461 -

"These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Each standoff has an outer diameter of 6mm. Sold in packs of 10. Check below for matching screws."

Standoffs Plastic - (4-40; 3/4"; 10 pack)
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: PRT-10462 -

"These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Sold in packs of 10. Check below for matching screws."

Switching Power Supply - DC 20V, 5A
OOD!
Price: $436.04
View
Availability: Back Order
Sparkfun Item #: TOL-14929 -

"This Switching DC Power Supply is a compact 100 Watt power supply delivering 1-20V and 0-5A from its three output terminals. These DC power supplies feature constant current or constant voltage modes with automatic crossover making them ideal for troubleshooting circuit boards or devices which require two or three different input voltage ranges. Typical applications for this compact power supply include educational labs, technical schools, internal training facilities, and hobbyists....

Switching Power Supply - DC 36V, 3A
OOD!
Price: $383.87
View
Availability: Back Order
Sparkfun Item #: TOL-14928 -

"This Switching DC Power Supply from B&K Precision is a compact 108 Watt power supply delivering 1-36V and 0-3A from its main isolated output. A unique feature of the this power supply is the USB charging port located on the front panel allowing you to charge a cell phone or MP3 player. Clean power and quiet operation make this power supply ideal for any bench in labs, workshops, and schools where bench space is limited. Features: Input Voltage:100VAC to 120VAC Number of Outputs: 1...

Thank the Maker Tee - Large
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14468 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This large light weight dark gray shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted mens cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is up this...

Thank the Maker Tee - Medium
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14467 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This medium light weight dark gray shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted mens cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is up this...

Thank the Maker Tee - Small
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14466 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This small light weight dark gray shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted mens cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is up this...

Thank the Maker Tee - XXL
Price: $38.16
View
Availability: Back Order
Sparkfun Item #: SWG-14470 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This XXL light weight dark gray shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted mens cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is up this...

Thank the Maker Womens Tee - Large
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14463 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This large light weight gray v-neck shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted women’s cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is...

Thank the Maker Womens Tee - Medium
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14462 -

"For the first time in a long while, we are happy to bring you a SparkFun limited-edition shirt! This size medium, lightweight, gray V-neck shirt has been emblazoned with the immortal words of our favorite golden robot, thanking each of you makers out there. The back of this fitted women’s cut tee features our SparkFun emblem and our slogan: “Start Something.” These shirts do run small, so you may need to purchase a size larger to fit. Note: This shirt is available for a...

Thank the Maker Womens Tee - Small
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14461 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This small light weight gray v-neck shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted women’s cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is...

Thank the Maker Womens Tee - XL
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: SWG-14464 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This extra large light weight gray v-neck shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted women’s cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that...

Thank the Maker Womens Tee - XXL
OOD!
Price: $38.16
View
Availability: Back Order
Sparkfun Item #: SWG-14465 -

"For the first time in a long while we are happy to bring you our first limited edition shirt! This XXL light weight gray v-neck shirt has been emblazoned with the immortal words of our favorite golden robot thanking each of you, Makers. On the back of this fitted women’s cut tee also has our SparkFun emblem and our moniker to Start Something. These shirts do run small so may need to purchase a size larger to fit. Note: This shirt is available only for a limited time. When that time is...

Thermal Gap Filler
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-14283 -

"This Thermal Gap Filler provides 1.1W/mK of thermal conductivity that can conform to most surfaces. It’s perfect for high-value products that you need to keep cool, as it is a poor conductor of electricity while remaining a great conductor of heat! No additional adhesive is required when applying the Thermal Gap Filler, as it is naturally tacky and sticks to whatever you need it to — just be sure that’s where you need it! This gap filler is what we use on our Stepoko motion...

Third Hand
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-09317 -

"This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but soldering flat on a table works just fine. Then again, the desk is starting to look like a mine field of burn marks and melted pot holes. What we’ve found with many of these cheaper third hand is the lack of stability. The small base on this unit does not make...

TM902C K Type Thermometer with Probe
Price: $10.86
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TTM902CK -

The TM902C is a compact, pocket-sized, 3.5 digit Temperature Meter that is ideal for use of home& industry applications. With the K type thermocouple coupler TP01 in the package, it will be very convenient measuring the temperature up to 300 degrees Celsius; user can also use some other K type thermocouple coupler, which would allow the TM902C measure temperature up to 1,300 degrees Celsius\u0103\u20ac\u201a Please note that the 9V battery has been taken off by default before the shipment. If...

Tool Kit - Screwdriver and Bit Set
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-10865 -

"There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a few slotted drivers but what about Torx, Hex Socket or Tri-Wing? This kit has them all. Along with a large variety of interchangeable bits and a hard ABS plastic handle, the kit also includes a steel extension bar and a flexible extension neck that really comes...

Tweezers - Curved (cross-lock, ESD Safe)
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: TOL-12572 -

"These are nice, cross-locking, curved tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you’re working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components. Documents: Product Video " ...

Tweezers - Curved (ESD Safe)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-10602 -

"You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date on the latest in ‘tweezing’ technology, we’re always buying and testing new tweezers. Okay… tweezers aren’t exactly the most exciting thing in the world, but they are super handy. These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This...

Tweezers - Straight (cross-lock, ESD Safe)
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: TOL-12573 -

"These are nice, cross-locking, straight tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you’re working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components. Documents: Product Video " ...

Tweezers - Straight (ESD Safe)
OOD!
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-10603 -

"You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date on the latest in ‘tweezing’ technology, we’re always buying and testing new tweezers. Okay… tweezers aren’t exactly the most exciting thing in the world, but they are super handy. These are nice, solid straight tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This...

USB Digital Multimeter - Auto-Ranging (RS232 Output)
OOD!
Price: $104.25
View
Availability: Back Order
Sparkfun Item #: TOL-12967 -

"It seems like everything plugs in to your computer these days, and this digital multimeter is no exception. This auto-ranging multimeter will test AC and DC voltage and current as well as capacitance, resistance, frequency and even temperature. It features a large, easily readable display for use in the field as well as the ability to connect to your computer for data logging, processing and analysis. It has all of the basic functions that you expect from a good digital multimeter including...

USB Oscilloscope - MSO-28
Price: $698.97
View
Availability: Back Order
Sparkfun Item #: TOL-11219 -

"Who needs a whole bag full of instruments just to do some debugging? Why can’t your logic analyzer and your DSO be the same box? Well this new tool from Link instruments solves that problem. The MSO-28 is a 2GSa/s oscilloscope as well as a 200MSa/s logic analyzer. This combination does more than save space, though, because with all ten channels being sampled during the same clock you get accurate time correlation between logic and o-scope events. All channels on the instrument can be...

Variety PCB Drill Set (10 Pieces)
OOD!
Price: $41.74
View
Availability: Back Order
Sparkfun Item #: TOL-14818 -

"This is variety PCB Drill Set from Carbide 3D that supplies you with more options for drilling into copper clad on your Shapeoko or Nomad CNC machines. Each set includes 10 unique PCB drills from 0.3mm to 1.2mm, each with a 0.125" shank. Additionally, each drill is made of solid carbide to ensure long lasting use. If you are wondering how best to utilize this kit, make sure to check out the free to use web app, Carbide Copper. Carbide Copper is CAM software to let you mill PCBs with your CNC...

Watts Up Meter
OOD!
Price: $53.47
View
Availability: Back Order
Sparkfun Item #: PRT-14331 -

"Let’s say “what’s up” to the Watt’s Up Meter! The Watt’s Up is an all-in-one digital DC ammeter and watt, watt-hour and amp-hour meter. Watt’s Up measures current, voltage and time — and from those measurements calculates peak current, peak power, minimum voltage, power, energy and charge values for you, in real time, for the circuit in which you connect it. The Watt’s Up is perfect for situations when you need to prevent peak currents...

Wax Block - 2" x 3" (Qty 5)
OOD!
Price: $52.17
View
Availability: Back Order
Sparkfun Item #: PRT-14903 -

"This is a five pack of two in by 3 inch wax machining blocks designed by Carbide 3D for your Shapeoko or Nomad CNC mill. Machining wax is a unique prototyping tool that is made specifically to stand up to the stresses of a CNC mill while still being able to be cut very quickly and hold even tiny details. These wax blocks are ideal for verifying CNC machining programs are functioning correctly, learning how to use a CNC without sacrificing valuable resources, or creating fun designs. Includes:...

Wire Strippers
Price: $8.52
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-THT10428T -

This wire strippers is extremely handy and comfortable to use. It used for stripping and cutting the most commonly used stranded and single wire. It is able to strip gauges 16 to 26 AWG and 0.2-1.25 mm fiber jackets.Specifications 26,24,20,18,16AWG settings 0.2,0.35,0.5,0.9,1.25 MM settings Package listWire Strippers x1Wiki & External links ...

Wire Strippers - 20-30AWG
OOD!
Price: $28.60
View
Availability: Back Order
Sparkfun Item #: TOL-14763 -

"These are higher grade wire strippers from Techni-Tool with a comfortable, curved grip making them an affordable option if you need to remove the protective sleeve from a desired wire. These are an essential part to any hacker’s arsenal and are able to strip 20-30AWG solid core and 22-32AWG stranded wire nicely. These Wire Strippers even have a locking mechanism to make sure you don’t accidently damage a wire before stripping and to help protect the hardened steel tool heads." ...

Wire Strippers - 22-30AWG
OOD!
Price: $24.77
View
Availability: Back Order
Sparkfun Item #: TOL-14762 -

"These are your basic, run-of-the-mill wire strippers from Techni-Tool with a comfortable grip making them an affordable option if you need to remove the protective sleeve from a desired wire. These are an essential part to any hacker’s arsenal and are able to strip 22-30AWG (0.65-0.25mm) solid core wire nicely. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video " ...

Wire Strippers - 30AWG (Hakko)
Price: $20.76
View
Availability: Stocked
Sparkfun Item #: TOL-12630 -

"These are extremely handy and comfortable to use wire strippers from Hakko. These are an essential part to any hacker’s arsenal and are able to strip 30AWG wire wrap wire nicely as well as the standard 22AWG hook up wire. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video " ...

Wire Wrap Tool
OOD!
Price: $66.67
View
Availability: Back Order
Sparkfun Item #: TOL-14915 -

"Now for a hand tool requested by almost every experienced engineer! This Wire Wrap Tool wraps, unwraps, and even strips the appropriate wire diameter with a unique built-in stripper blade. This tool is ideal for work bench use and is extremely handy to find in tool kits in all service and repair applications. In addition to versatility, convenience, and reliability, this Wire Wrap Tool offers exceptional value. This tool is recommended for .025” square terminals on .100” centers,...

Xcelite 8-in-1 Screwdriver Set
OOD!
Price: $51.04
View
Availability: Back Order
Sparkfun Item #: TOL-14235 -

"The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren’t currently using. Though the screwdriver set includes eight unique bits, the end of the shaft features a 0.25" hex driver that can fit most of your existing ¼" bits. With a strong magnetic hold and no-roll handle design, this is one of the best all-in-one tools we have used!...

Xcelite Ergonomic Screwdriver Set (6pcs)
OOD!
Price: $95.55
View
Availability: Back Order
Sparkfun Item #: TOL-14234 -

"The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and handle. Utilizing Xcelite’s own Ergonic® handles, each screwdriver in this set conforms to your hand to provide great comfort and reduce torque loss to provide you with a fantastic slip-resistant tool! The set includes two Phillips head and four flathead screwdrivers. The screwdrivers in this set have been equipped with durable, satin-finished chrome...