Products 37-62 of 62
Show

I2C LCD module dedicated cable

Availability: Back Order
Item #: FIT0081 -
Price: $1.47 inc GST
DFRobot

This is a 4 pin female-female cable with buckle which we have wired for use with the DFRobot interface shield and other DFRobot products like the I2C LCD backpack.|Specification| 22cm(8.66") cable 4...

This is a 4 pin female-female cable with buckle which we have wired for use with the DFRobot interface shield and other DFRobot products like the I2C LCD backpack.|Specification| 22cm(8.66") cable 4 pin female buckle connectors|ShippingList| jumper cable x1

IDC2x5 Cable

Availability: Back Order
Item #: FIT0029 -
Price: $4.48 inc GST
DFRobot

This cable is especially designed for Interface shield, LED RGB Module. It is has a female 2&;times;5 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2&;times;3 shrouded...

This cable is especially designed for Interface shield, LED RGB Module. It is has a female 2&;times;5 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2&;times;3 shrouded box header.|Specification| Length:20cm (7.9&;#39;&;#39;) Female/Femal, IDC 2x5 Connector|ShippingList| IDC2x5 Cable x1 ...

Interface Cable SMA to U.FL

Availability: Back Order
Item #: FIT0219 -
Price: $5.95 inc GST
DFRobot

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections.|Applications|Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For...

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections.|Applications|Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino|Specification| Frequency Range:DC~12.4GHz VSWR:≤1.10+0.02f Impedance:50 Ω Connector: SMA Female IPEX/U.FL Cable:1.13x1.13x150mm(0.04"x0.04"x5.91")|ShippingList| Interface Cable SMA to u.FL x1 ...

Jumper Wire - 0.1 inch(housing pin not included)

Availability: Back Order
Item #: FIT0215 -
Price: $3.10 inc GST
DFRobot

This is a 12" ribbon cable made of ten jumper wires with different colors. The wires can easliy be pulled apart for individual use and each wire comes with two female headers already attached. We...

This is a 12" ribbon cable made of ten jumper wires with different colors. The wires can easliy be pulled apart for individual use and each wire comes with two female headers already attached. We have to say,these are so handy that we use them, on many of our projects and prototypes. Note: 0.1" housing pins are not included |ShippingList| 12" ribbon cable (0.1" housing pins not included) x10

Jumper Wires (F/M) (65 Pack)

Availability: Stocked
Item #: FIT0121 -
Price: $10.17 inc GST
DFRobot

Jumper wires are one of the most important gear component for the tinkerer. Often understimated, but one of the first things to miss. If you are starting to assemble your tinker gear and wondering...

Jumper wires are one of the most important gear component for the tinkerer. Often understimated, but one of the first things to miss. If you are starting to assemble your tinker gear and wondering if this is really needed, doubt not, this is at some point or another always used. Wire or pieces or wire are basic, even for the non-often tinkerers. Jumper wires are not just fitted for prototyping but also a resource for repurposing. You can cut them and add new headers, or mix them up and connect...

Jumper Wires 7.8 inch F/M (10 Pack)

Availability: Back Order
Item #: FIT0301 -
Price: $3.10 inc GST
DFRobot

These are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one...

These are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (ten wires with different color). We use these wires for everything! They work great with breadboards, Arduino, breakout board and really any 0.1" pitch prototyping board.|Specification| 0.1" pin header 20cm length wires |ShippingList|...

Jumper Wires 7.8 inch F/M (High Quality 30 Pack)

Availability: Stocked
Item #: FIT0365 -
Price: $6.72 inc GST
DFRobot

Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...

Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a variety of colours. These jumper wires are perfect for breadboards, Arduino creations, or any other applications which require frequent connections and disconnections. |Specification| Length: 210mm +/-3mm (8.27" +/-0.12") Wire Gauge: 26 AWG multi-stranded|ShippingList| Jumper Wires 7.8" F/M (High...

Jumper Wires 9 inch F/F (10 Pack)

Availability: Back Order
Item #: FIT0030 -
Price: $3.10 inc GST
DFRobot

These are 9"(23cm) long jumper wires terminated as female to female. Use these to connect from any male header on any board such as DFRobot IO Shields. Multiple jumpers can be connected next to one...

These are 9"(23cm) long jumper wires terminated as female to female. Use these to connect from any male header on any board such as DFRobot IO Shields. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors may vary).We use these wires for everything! They work great with breadboards, Arduino, and really any 0.1" pitch prototyping board. If you are starting with Arduino, jumper wires are sure to come handy at some point. They are great...

Mesh cable guide (1.25m) (49.21)

Availability: Back Order
Item #: FIT0250 -
Price: $1.02 inc GST
DFRobot

This is a black braided cable guide. The braid provides some rigidity to the cables, also, it can be expanded by compressing it which will allow many more cables to fit inside. |Specification|...

This is a black braided cable guide. The braid provides some rigidity to the cables, also, it can be expanded by compressing it which will allow many more cables to fit inside. |Specification| Color: Black Length: 1.25m (49.21") Inner diameter: 10mm (0.39") |ShippingList| Braided cable guide (1.25 meter)

Micro USB Cable

Availability: Back Order
Item #: FIT0265 -
Price: $5.00 inc GST
DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for...

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. You can use this to create a simple way to connect mobile devices to a computer for every day tasks such as data synchronization and...

Micro USB cable with Switch

Availability: Back Order
Item #: FIT0459 -
Price: $8.27 inc GST
DFRobot

This cable will supply power to anything that has a Micro USB port. The cable does not transfer data, but it's good for powering and charging devices with a convenient on/off switch (with a...

This cable will supply power to anything that has a Micro USB port. The cable does not transfer data, but it's good for powering and charging devices with a convenient on/off switch (with a satisfying click) so you don't have to unplug the cable every time you want to turn your device off.|Specification| Length: 1.5m Shipping list USB cable with Switch - A/MicroB x1 ...

Micro USB Cable with Switch

Availability: Stocked-NoBackOrder
Item #: EL-RPA06086L -
Price: $4.38 inc GST
Elecrow

The raspberry pi has no switch, so it?s trouble to control its power supply except drawing the usb. That?s inconvenient especially in the process of preliminary debugging. So buy a power supply...

The raspberry pi has no switch, so it?s trouble to control its power supply except drawing the usb. That?s inconvenient especially in the process of preliminary debugging. So buy a power supply cable with ON/OFF switch is necessary. Not only for raspberry but also your mobile phone and other micro USB devices. It benefits to keeping on your device-battery?s working life. Features Product requirements: meet ROHS requirements Color: Black Length: 1.5m Range: USB power output Package list USB...

Mini USB cable

Availability: Back Order
Item #: FIT0057 -
Price: $3.28 inc GST
DFRobot

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell...

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and portable media devices. This is the cable you need for the DFRduino Nano, arduino FIO.|ShippingList| Mini USB cable x1

Mini USB Cable - 3m

Availability: Stocked-NoBackOrder
Item #: EL-PCW00301C -
Price: $5.01 inc GST
Elecrow

    This is a popular USB cable - type A to type Mini. No matter connecting arduino main boards to your computer, or for the connection between a usb storage device ,even mobile...

    This is a popular USB cable - type A to type Mini. No matter connecting arduino main boards to your computer, or for the connection between a usb storage device ,even mobile phone, it plays an important role everywhere. It's a 3m cable and long enough for normal use.

Open Logic Sniffer - Probe Cable Kit

Availability: Stocked
Item #: TOL-10086 -
Price: $19.03 inc GST
Sparkfun

Open Logic Sniffer - Probe Cable Kit Description: This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. Each cable...

Open Logic Sniffer - Probe Cable Kit Description: This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. Each cable connects 8 of the 16 buffered input channels, plus ground.

Redpark Serial Cable for iOS

Availability: Back Order
Item #: FIT0196 -
Price: $102.57 inc GST
DFRobot

The Redpark Serial Cable for iOS is the first and only cable approved by Apple for connecting your iOS device to almost anything using serial communication! With this cable, you can open up your...

The Redpark Serial Cable for iOS is the first and only cable approved by Apple for connecting your iOS device to almost anything using serial communication! With this cable, you can open up your iPhone, iPad, or iPod touch and let your imagination run wild! Use external sensors in your iOS apps! Talk to an Arduino with your iPhone!The possibilities are unlimited! The cable is used in conjunction with the Redpark Serial Cable SDK. Together these tools enable hobbyist, education and enterprise...

Redpark TTL Serial Cable for iOS

Availability: Back Order
Item #: FIT0289 -
Price: $102.57 inc GST
DFRobot

This is the latest revision of the popular RedPark TTL Serial cable connects iOS devices to TTL serial devices. It is designed for use with iPhone 4S, iPhone 3GS, iPod touch (fourth generation),...

This is the latest revision of the popular RedPark TTL Serial cable connects iOS devices to TTL serial devices. It is designed for use with iPhone 4S, iPhone 3GS, iPod touch (fourth generation), iPad (3rd generation), iPad 2 and iPad.The cable is used in conjunction with the Redpark Serial Cable SDK. Together these tools enable hobbyist, education and enterprise developers to write iOS apps that communicate with serial devices. These apps may be deployed for private use at home, at school or...

Rigid Shaft Coupling

Availability: Stocked
Item #: UM-1027 -
Price: $18.77 inc GST
Ultimaker

Rigid Shaft Coupling For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Rigid Shaft Coupling For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Spiral Cable Wrap (12mm)

Availability: Back Order
Item #: FIT0251 -
Price: $5.00 inc GST
DFRobot

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they&;#39;ve already been plugged in, or when you have many cables going to differnet places. NOTE:...

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they&;#39;ve already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is available upon request. Please contect Sales for details. |Specification| Color: white Length: 1m(39.37") inner diameter: 12mm(0.47") |ShippingList| Spiral cable guide x1 ...

Type-B USB Cable For Arduino - 1.5m

Availability: Stocked-NoBackOrder
Item #: EL-PCW11501C -
Price: $2.63 inc GST
Elecrow

This is a Type-B USB cable, which compatible with Arduino Uno. It's a 1.5m cable and long enough for normal use. This is a Type-B USB cable, which compatible with Arduino Uno. It's a 1.5m cable and...

This is a Type-B USB cable, which compatible with Arduino Uno. It's a 1.5m cable and long enough for normal use. This is a Type-B USB cable, which compatible with Arduino Uno. It's a 1.5m cable and long enough for normal use.

Type-B USB Cable For Arduino - 3m

Availability: Stocked-NoBackOrder
Item #: EL-PCW10301C -
Price: $6.01 inc GST
Elecrow

    This is a Type-B USB cable, which compatible with Arduino Uno. It's a 3m cable and long enough for normal use. ...

    This is a Type-B USB cable, which compatible with Arduino Uno. It's a 3m cable and long enough for normal use.

U Shape Jumper Wires (Box)

Availability: Back Order
Item #: FIT0122 -
Price: $11.21 inc GST
DFRobot

This is a time saving kit of jumper wires - cut, stripped,bent 90 degree on both ends for easy insertion and your prototyping pleasure. Make your prototyping neat and looks nicer, The box included...

This is a time saving kit of jumper wires - cut, stripped,bent 90 degree on both ends for easy insertion and your prototyping pleasure. Make your prototyping neat and looks nicer, The box included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 10 pieces of each. Various colors of jumper wire, perfectly fit for breadboard and protoboard. 140pcs a box, get one and use in your future project again and again! |Specification| #22...

USB Cable - A-to-B 6 Foot Retail

Availability: Stocked
Item #: RTL-10423 -
Price: $8.61 inc GST
Sparkfun

"This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards...

"This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno. Length: 6 Feet"

USB Hub 4 Port

Availability: Stocked-NoBackOrder
Item #: EL-ACA11004U -
Price: $4.62 inc GST
Elecrow

This is a cute 4-channel USB Hub. It is like the body of a little boy, with 4 USB connectors at legs and foots. It supports the 480M bps USB2.0 and compatible with USB1.1 and 1.0. with this module,...

This is a cute 4-channel USB Hub. It is like the body of a little boy, with 4 USB connectors at legs and foots. It supports the 480M bps USB2.0 and compatible with USB1.1 and 1.0. with this module, you can connect more USB devices or modules to USB host such as a Raspberry Pi or PC. FeaturesIncrease 4x USB portsSupports USB 2.0, runs at 480MbpsUSB 1.1 compatiblePlug and playSystems supported: Win95/98/Me/2000/XP/win 7,MAC OS XPowered by USB port, no external power needed ...

USB to RS422/RS485 Cable

Availability: Back Order
Item #: FIT0272 -
Price: $44.82 inc GST
DFRobot

The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports...

The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ports. USB to RS422/RS485 industrial intelligent converter,no power supply needed,plug-and-play USB485 is a kind of USB to RS485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS422/RS485. Compared with RS232 to RS422/RS485...

WRTnode Dev Cables Kit

Availability: Back Order
Item #: FIT0414 -
Price: $6.21 inc GST
DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable.WRTnode(A...

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable.WRTnode(A Mini OpenWRT Dev Board) is a high performance CPU, low power consuming, cheap and small dev board that can run OpenWRT OS and also easy to port all open source software of Linux. OpenWRT is a Linux distribution for embedded devices, the framework to build an application without having to build a...