Components + IC's + PCB's

Products 625-672 of 674
Show
Triple Axis Accelerometer - ADXL335
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: COM-09265 -

"The ADXL335 is a small, thin, low power, complete 3-axis MEMS accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be...

Triple Axis Accelerometer - ADXL345
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: SEN-09045 -

"The ADXL345 is a small, thin, low power, three-axis MEMS accelerometer with high resolution (13-bit) measurement up to ±16g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution...

Triple Axis Accelerometer - LIS331HH
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: COM-09755 -

"The LIS331HH is an ultra low-power full-scale three axis linear MEMS accelerometer. It has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. The device also features ultra low-power operational modes that allow advanced power saving and smart sleep to wake-up functions. The LIS331HH has dynamically user selectable full scales of +-6g/+-12g/+-24g and is capable of measuring accelerations with output data rates from 0.5 Hz to 1kHz. The self-test...

Triple-Axis Digital-Output Gyroscope - ITG-3200
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: SEN-09793 -

"The ITG-3200 is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I²C (400kHz) interface. Additional features include an embedded temperature sensor...

Tube - Aluminum (1"OD x 14"L x 0.82"ID)
OOD!
Price: $9.37
View
Availability: Back Order
Sparkfun Item #: ROB-12375 -

"These 14" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 14.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 16"L x 0.82"ID)
OOD!
Price: $11.63
View
Availability: Back Order
Sparkfun Item #: ROB-12356 -

"These 16" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 16.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 18"L x 0.82"ID)
Price: $14.24
View
Availability: Back Order
Sparkfun Item #: ROB-12155 -

"These 18" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 18.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 2.0"L x 0.82"ID)
OOD!
Price: $2.24
View
Availability: Back Order
Sparkfun Item #: ROB-12520 -

"These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 2.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 24"L x 0.82"ID)
Price: $19.98
View
Availability: Back Order
Sparkfun Item #: ROB-12173 -

"These 24" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 24.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 4.0"L x 0.82"ID)
Price: $3.29
View
Availability: Stocked
Sparkfun Item #: ROB-12460 -

"These 4" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 4.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1"OD x 8.0"L x 0.82"ID)
Price: $5.20
View
Availability: Back Order
Sparkfun Item #: ROB-12294 -

"These 8" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 8.0" OD - 1" ID - 0.82" Width - 0.09" "

Tube - Aluminum (1/2"OD x 12"L x 0.444"ID)
Price: $7.81
View
Availability: Back Order
Sparkfun Item #: ROB-12117 -

"These 12" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 12.0" OD - ½" ID - 0.444" Width - 0.03" "

Tube - Aluminum (1/2"OD x 2.0"L x 0.444"ID)
Price: $2.59
View
Availability: Back Order
Sparkfun Item #: ROB-12113 -

"These 2" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 2.0" OD - ½" ID - 0.444" Width - 0.03" "

Tube - Aluminum (3/8"OD x 10"L x 0.30"ID)
OOD!
Price: $5.90
View
Availability: Back Order
Sparkfun Item #: ROB-12215 -

"These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 10.0" OD - 3/8" ID - 0.30" Width - 0.035" "

Tube - Aluminum (3/8"OD x 12"L x 0.30"ID)
Price: $6.94
View
Availability: Back Order
Sparkfun Item #: ROB-12346 -

"These 12" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 12.0" OD - 3/8" ID - 0.30" Width - 0.035" "

Tube - Aluminum (3/8"OD x 2.0"L x 0.30"ID)
Price: $1.72
View
Availability: Back Order
Sparkfun Item #: ROB-12279 -

"These 2" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 2.0" OD - 3/8" ID - 0.30" Width - 0.035" "

Tube - Aluminum (3/8"OD x 6.0"L x 0.30"ID)
Price: $3.81
View
Availability: Back Order
Sparkfun Item #: ROB-12268 -

"These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 6.0" OD - 3/8" ID - 0.30" Width - 0.035" "

Tube - Aluminum (3/8"OD x 8.0"L x 0.30"ID)
OOD!
Price: $4.85
View
Availability: Back Order
Sparkfun Item #: ROB-12101 -

"These 8" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 8.0" OD - 3/8" ID - 0.30" Width - 0.035" "

Tube - Stainless (1"OD x 10"L x 0.88"ID)
OOD!
Price: $17.72
View
Availability: Back Order
Sparkfun Item #: ROB-12217 -

"These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 10.0" OD - 1" ID - 0.88" Width - 0.06" "

Tube - Stainless (1"OD x 12"L x 0.88"ID)
Price: $20.85
View
Availability: Back Order
Sparkfun Item #: ROB-12253 -

"These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 12.0" OD - 1" ID - 0.88" Width - 0.06" "

Tube - Stainless (1"OD x 2.0"L x 0.88"ID)
Price: $4.50
View
Availability: Back Order
Sparkfun Item #: ROB-12208 -

"These 2" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 2.0" OD - 1" ID - 0.88" Width - 0.06" "

Tube - Stainless (1"OD x 6.0"L x 0.88"ID)
Price: $10.76
View
Availability: Back Order
Sparkfun Item #: ROB-12337 -

"These 6" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 6.0" OD - 1" ID - 0.88" Width - 0.06" "

Tube - Stainless (1"OD x 8.0"L x 0.88"ID)
OOD!
Price: $14.24
View
Availability: Back Order
Sparkfun Item #: ROB-12547 -

"These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 8" OD - 1" ID - 0.88" Width - 0.06" "

Tubing - Aluminum (5/8"OD x 10"L x 0.569"ID)
OOD!
Price: $7.63
View
Availability: Back Order
Sparkfun Item #: ROB-12254 -

"These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 10.0" OD - 5/8" ID - 0.569" Width - 0.028" "

Tubing - Aluminum (5/8"OD x 2.0"L x 0.569"ID)
Price: $3.46
View
Availability: Back Order
Sparkfun Item #: ROB-12182 -

"These 2" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 2.0" OD - 5/8" ID - 0.569" Width - 0.028" "

Tubing - Aluminum (5/8"OD x 4.0"L x 0.569"ID)
Price: $4.50
View
Availability: Back Order
Sparkfun Item #: ROB-12314 -

"These 4" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 4.0" OD - 5/8" ID - 0.569" Width - 0.028" "

Tubing - Aluminum (5/8"OD x 6.0"L x 0.569"ID)
OOD!
Price: $5.55
View
Availability: Back Order
Sparkfun Item #: ROB-12236 -

"These 6" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 6.0" OD - 5/8" ID - 0.569" Width - 0.028" "

Tubing - Aluminum (5/8"OD x 8.0"L x 0.569"ID)
OOD!
Price: $6.59
View
Availability: Back Order
Sparkfun Item #: ROB-12419 -

"These 8" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Dimensions: Length - 8.0" OD - 5/8" ID - 0.569" Width - 0.028" "

Uh-oh Battery Level Indicator Kit
Price: $10.35
View
Availability: Stocked
Sparkfun Item #: KIT-11087 -

Uh-oh Battery Level Indicator Kit Description: Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or overwritten in odd ways, can cause unexpected behavior in connected systems and just generally screw up your day. One way to avoid this is to keep an eye on your battery voltage and turn off the system before it gets too low (or plug it in). We've whipped up a little board to help you out with this...

USB Female Type A SMD Connector
OOD!
Price: $2.17
View
Availability: Back Order
Sparkfun Item #: PRT-09011 -

"USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32. Documents: Datasheet "

USB Female Type B Connector
OOD!
Price: $2.17
View
Availability: Back Order
Sparkfun Item #: PRT-00139 -

"USB Type ‘B’ Female connector. The 4 connection pins have .1" spacing allowing it to be inserted into development boards and perf boards with mild modification. You can either drill two 80mil holes for the support posts, or cut them off completely. Documents: Datasheet "

USB Male Type A Connector
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-00437 -

"USB Type ‘A’ Male connector. Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable. Documents: Datasheet "

USB Mini-B SMD Connector
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: PRT-00587 -

"USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB. Documents: Datasheet "

USB to FIFO Bridge - FT245RL
Price: $10.35
View
Availability: Back Order
Sparkfun Item #: COM-00787 -

USB to FIFO Bridge - FT245RL Description: The popular FTDI USB to FIFO IC with built-in EEPROM and built-in oscillator! This IC comes in a 28-pin SSOP package and can be soldered by hand. The FT245R is the latest IC from FTDI requiring very few external components for operation! This FIFO IC gives the user 8 I/O pins for parallel reading and writing. Features: Implements full v2.0 USB protocol Needs no external crystal Requires only a pull-up resistor and two decoupling caps Internal EEPROM...

USB to Micro-B Adapter
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: COM-14567 -

"It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet, connect a keyboard to your phone in order to text with ease, attach a Bluetooth® dongle to your RPi Zero, and more! Since this adapter is super small, it is very easy to transport anywhere you might need it — making it extremely convenient to have in a pinch. Installation of the USB to Micro-B...

USB UART Convertor CH340G
Price: $6.58
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PPB340GUU -

It\'s a small USB to TTL serial tool, using the CH340G chip. You can use it to connect some serial device to your PC via USB port.Features Compatible with WINDOWS 98/ME/2000/XP/Server 2003/VISTA/Server 2008/Win7/Win8 32-bit & 64-bit To test the unit use the shunt to connect TX and RX (loopback test)3.3V and 5.0V outputs are available to power your project directly from the adapter.Wiki & External linksDrivers ...

USB Weatherproof Connector - Panel Mount (USB B)
OOD!
Price: $30.95
View
Availability: Back Order
Sparkfun Item #: PRT-11370 -

"There are times when you need to subject your electronics to some pretty intense environments. The most challenging part of designing for rough conditions is the problem of how to protect your electrical connections to the outside world. A normal panel mount connector will collect dust and leak water, but luckily, we just picked up these IP68 rated weatherproof USB connectors. These USB-B type connectors are housed in a molded plastic assembly with O-rings and panel gaskets to keep your panel...

Voltage Detector - NCP303
Price: $0.87
View
Availability: Back Order
Sparkfun Item #: COM-10828 -

"The NCP303 is an ultra−low current voltage detector that contains a programmable time delay generator. These devices are specifically designed for use as reset controllers in portable microprocessor based systems where extended battery life is paramount. It features a highly accurate undervoltage detector with hysteresis and an externally programmable time delay generator. This combination of features prevents erratic system reset operation. Features: Quiescent Current of 0.5 uA...

Voltage Level Translator SMD - TXB0108 (Strip of 5)
OOD!
Price: $14.50
View
Availability: Back Order
Sparkfun Item #: DD-14159 -

"This is a strip of five TXB0108 SMD ICs, which function as bidirectional voltage level translators, from Texas Instruments. These 8-bit noninverting translators use two separate yet configurable power-supply rails, with 1.2V to 3.6V on the A Port and 1.65V to 5.5V on the B Port. This allows for universal low-voltage bidirectional translation between any of the 1.2V, 1.5V, 1.8V, 2.5V, 3.3V and 5V voltage nodes. As each of these ICs is SMD, a high level of skill in soldering is required —...

Voltage Regulator - 12V
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: COM-12766 -

"This is the basic L7812 voltage regulator, a three-terminal positive regulator with a 12V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control, and safe area protection for your project. Each one of these voltage regulators can output a max current of 1.5A. Features: Output Voltage: 12V Output Current: 1.5A Thermal Overload Protection Short Circuit Protection Output Transition SOA Protection Documents: Datasheet Fixed...

Voltage Regulator - 3.3V
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: COM-00526 -

"This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output voltage tolerance within ±1%. Each one of these voltage regulators can output a max current of 800mA. Features: Output Voltage: 3.3V Output Current: 800mA Dropout Voltage: 1V Internal Current and Thermal Limit...

Voltage Regulator - 5V
Price: $1.65
View
Availability: Stocked
Sparkfun Item #: COM-00107 -

"This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control, and safe area protection for your project. Each one of these voltage regulators can output a max current of 1.5A. Features: Output Voltage: 5V Output Current: 1.5A Thermal Overload Protection Short Circuit Protection Output Transition SOA Protection Documents: Datasheet Fixed Power...

Voltage Regulator - Adjustable
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: COM-00527 -

"This is the LM317TG voltage regulator, a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator provides a local regulation, internal current limiting, thermal shut-down control, and safe area protection for your project. Did we mention that this guy is easy to use? It only requires two external resistors to set the output voltage. Each one of these voltage regulators can output a max current of 1.5A. Features: Output Voltage: 1.2V - 37V...

Voltage Regulator - Adjustable LM1117 SMD
OOD!
Price: $2.61
View
Availability: Back Order
Sparkfun Item #: COM-00595 -

"This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator, contained in a handy surface mount package. Requires two external resistors to function. Documents: FAN1117A.pdf SFE Eagle Library has this part! Check out our Unregulated Power Supply Tutorial " ...

Voltage Regulator - BD10KA5W (500mA)
OOD!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: COM-10827 -

"The BD10KA5W is a low-saturation regulator with an output voltage precision of ±1%. It also has built-in overcurrent protection that prevents the destruction of the IC, due to output short circuits and a thermal shutdown circuit. Features: Max Output Current : 500mA Output Voltage Precision : 1.0V ±1% Built-in Overcurrent Protection Circuit Built-in Thermal Shutdown Circuit Shutdown Switch Operating Temperature Range : -40C to +105C Documents: Datasheet (BD10KA5WF) " ...

WiiChuck Adapter (Arduino Compatible)
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: DFR0062 -

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. Compared with standard WiiChuck, the DFRobot WiiChuck has extra 4 pins which allow you connect it to two devices. The Wii Nunchuck is loaded with features -- a 2-axis joystick, two buttons and a 3 axis ?2g accelerometer -- and any...

Wire Connector Set
OOD!
Price: $0.52
View
Availability: Back Order
DFRobot Item #: FIT0452 -

This wire connector set is made by flame retardant material. It works very well in extreme environment. |Specification| Type: XPE012 Rated current: 10A Rated voltage: 380V Shell material: flame retardant Temperature resistance: 105 ? Connector: 2|ShippingList| Wire Connector Set x1 ...

Wixel
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: WRL-10665 -

"The Wixel is a great general-purpose module from Pololu. By taking advantage of the feature-rich CC2511F32 microcontroller from Texas Instruments, the Wixel provides integrated 2.4 GHz wireless communication, 32 KB of flash memory, 4 KB of RAM, full-speed USB interface and 15 general-purpose I/O lines (including 6 analog inputs). A single Wixel can be used as a computer-interface device, such as a USB-to-serial adapter, and it can even serve as the main controller for your system. With two or...