All Items
In Stock

Products 65-107 of 107
Show

Gravity:Digital Infrared Distance Sensor (10cm)

Back Order
Availability: Back Order
Item #: SEN0042 -
Price: $16.89
DFRobot

This is an edge detection sensor from DFRobot. It will help your robot detect the edge of a precipice, preventing it from falling off a table or down the stairs to it's certain demise! This IR...

This is an edge detection sensor from DFRobot. It will help your robot detect the edge of a precipice, preventing it from falling off a table or down the stairs to it's certain demise! This IR distance sensor is connected to an arduino digital pin. |Applications| Edge detection sensor Intelligent Mobile Robotics Platforms Home Cleaning Robots |Specification| Supply Voltage: 2.7~6.2v Current: &;lt; 10mA Range distance: 1~10cm(0.04~0.39") Interface:Digital Output Signal Voltage: Vcc-0.6v(High)...

Gravity:Digital IR Receiver Module

Back Order
Availability: Back Order
Item #: DFR0094 -
Price: $6.72
DFRobot

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller.Well, it will be...

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller.Well, it will be also easy to make your own IR controller using IR transmitter. |Specification| Power Supply:5V Interface:Digital Modulate Frequency:38Khz |Documents| Wiki Doc IR Remote Library Schematics|ShippingList| Digital IR Receiver Module(Arduino Compatible) x1 Digital Cable ...

Gravity:Digital Push Button (White)

Back Order
Availability: Back Order
Item #: DFR0029-W -
Price: $2.93
DFRobot

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An...

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability. |Features| Wide voltage range from 3.3V to 5V Standard assembling structure (two 3mm diameter holes with multiple of...

Gravity:Digital Push Button (Yellow)

Back Order
Availability: Back Order
Item #: DFR0029-Y -
Price: $2.93
DFRobot

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An...

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability. |Features| Wide voltage range from 3.3V to 5V Standard assembling structure (two 3mm diameter holes with multiple of...

Gravity:Digital Self-Locking Switch

Back Order
Availability: Back Order
Item #: DFR0423 -
Price: $3.28
DFRobot

This Digital Self-Locking Switch module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating...

This Digital Self-Locking Switch module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and is compatible with the "gravity" 3-pin interface making it easy to connect to an Arduino I/O Expansion Shield. |Specification| Operating Voltage: +3.3-5V Output Type: Digital Interface Mode: PH2.0-3P Dimension: 30*22mm/1.18*0.86 inches|Documents| Wiki Doc Related Documents |ShippingList|...

HDMI Connector for 5 inch HDMI Raspberry Pi Screen

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-DRA04605C -
Price: $1.67
Elecrow

This is a HDMI connector for 5 inch raspberry pi screen, it saves a lot of space and play a role for attaching the raspberry pi with your raspberry pi screen. And you can choose this compatiable 5...

This is a HDMI connector for 5 inch raspberry pi screen, it saves a lot of space and play a role for attaching the raspberry pi with your raspberry pi screen. And you can choose this compatiable 5 inch raspberry pi screen if you want Features HDMi connector Suitable for 5 inch raspberry pi screen Light weght and save more space Specifications Weight?4.6g Dimensions:17mm(L) x 14mm(W) x 14mm(H) Package list HDMI Connector for 5 inch HDMI Raspberry Pi Screen x1 Wiki & External links ...

HDMI Connector for CrowPi with Raspberry Pi 4B

Back Order
Availability: Back Order
Item #: EL-ACC00170A -
Price: $4.12
Elecrow

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector. ...

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector.

LCD1602 Display for Micro: bit

Stocked
Availability: Stocked
Item #: EL-DTS02115S -
Price: $13.46
Elecrow

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and...

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and digital port. LCD1602 display contrast also can be adjusted. Features Apply to Micro: bit. The contrast also can be adjusted. 4-wire communication. Specifications Crowtail interface : IIC, UART, analog port and digital port Output voltage:5v Size: 37mm x 80mm Package list LCD1602 Display for Micro: bit...

Math & Automatic Touch Keyboard for micro:bit (V1.0)

Back Order
Availability: Back Order
Item #: MBT0016 -
Price: $55.45
DFRobot

INTRODUCTION This is a Math & Automatic expansion board for micro:bit. Easy to use, and suitable for a wide range of applications. We designed this board for two sorts of application scenarios: math...

INTRODUCTION This is a Math & Automatic expansion board for micro:bit. Easy to use, and suitable for a wide range of applications. We designed this board for two sorts of application scenarios: math game and automation control. The 16 programmable touch keys and RGB LEDs on the board offers rich function and flexible input and output. Besides, the board has 1 vibration motor, 1 buzzer, 2 motor ports, 2 servo ports and 9 expansion ports, which lays a foundation for using in automation...

Mechanic-Loader for micro: Maqueen

Stocked
Availability: Stocked
Item #: ROB0156-L -
Price: $22.13
DFRobot

Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple...

Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maquee in this kit. FEATURES Support for Maqueen4.0 and laterSupport...

Micro: bit Dancing Programmable Robot

Stocked
Availability: Stocked
Item #: EL-MIB00243A -
Price: $142.52
Elecrow

This is a cute programmable robot, you can create more fun with micro:bit. The body is assembled, so just plug the micro:bit and then play with it. It is great for you to...

This is a cute programmable robot, you can create more fun with micro:bit. The body is assembled, so just plug the micro:bit and then play with it. It is great for you to choose as your entry-level robot. Support Web graphical programming creates your own game easier. Compatible with Lego bricks make your programming more fun. Come with ultrasonic sensor, touch sensor, sound sensor, buzzer, RGB LED. With the function of infrared intelligence avoid obstacle, voice...

Micro: bit Gamer Shield with Joystick and Buttons

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-MIB06015G -
Price: $24.22
Elecrow

Playing game with your Micro: bit sounds cool, we make this gamer shield for you to relax yourself. Besides game, you can also DIY your robot, and control your own robot with this handle. There are...

Playing game with your Micro: bit sounds cool, we make this gamer shield for you to relax yourself. Besides game, you can also DIY your robot, and control your own robot with this handle. There are five buttons and XY joystick on this handle that can make you control your robot or play game easier. Specifications Working voltage: 3v The interface of X joystick: P0 The interface of Y joystick: P1 The interface of 5 buttons: P2 Installation Method Install the countersunk head screw on the side...

Micro: bit GPIO Expansion Board

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-DTS01559G -
Price: $9.86
Elecrow

This is a GPIO expansion board for Micro: bit, it?s convenient to operate. It can be inserted the expansion board directly into the Micro: bit, and this expansion board can be cascaded....

This is a GPIO expansion board for Micro: bit, it?s convenient to operate. It can be inserted the expansion board directly into the Micro: bit, and this expansion board can be cascaded. Specifications Size: 64 x 37 x 12 mm Package list Micro: bit GPIO expansion board x 1 ...

micro: Maqueen Lite (with micro:bit V2)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: ROB0148-EN-1 -
Price: $85.20
DFRobot

I am MaqueenHello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and...

I am MaqueenHello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and plug-and-play allow children to quickly learn graphic programming in entertaining, nurturing children's interest in science and logical thinking.Suggest Age: 8 +Maqueen is accessible to Mind+ Programming platform now. Mind+ is a Scratch3.0-based graphical programming platform from DFRobot, supporting...

micro: Maqueen Lite-micro:bit Educational Programming Robot Platform (without mico:bit)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: ROB0148-EN -
Retail: $47.30
Price: $36.39
DFRobot

I am MaqueenHello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting...

I am MaqueenHello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and plug-and-play allow children to quickly learn graphic programming in entertaining, nurturing children's interest in science and logical thinking.Suggest Age: 8 +Maqueen is accessible to Mind+ Programming platform now. Mind+ is a Scratch3.0-based graphical programming platform from DFRobot,...

Micro:bit - an Educational & Creative Tool for Kids

Out of Stock
Availability: Out of Stock
Item #: DFR0497 -
Price: $26.43
DFRobot

micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and...

micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a variety of on-board modules, including a 5x5 LED matrix (also supports light detection), 2 programmable buttons, motion detector, Compass and Bluetooth® Smart module. Additionally, you may attach more modules such as a servo motor, RGB LED lights through 5 I/O rings or 20 edge...

micro:bit Enclosure (LEGO Compatible)

Back Order
Availability: Back Order
Item #: FIT0533 -
Price: $4.29
DFRobot

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive...

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection.The enclosure has LEGO interface on the back. With LEGO interface, you can build lots of creative projects. It is a perfect combination between micro:bit and LEGO!|Features|Reserved A-B buttons and RST ButtonABS transparent materialLEGO compatible|Specification|Size: 57.5x34.5x14.4 mm/...

micro:bit Expansion Board for Boson (Gravity Compatible)

Back Order
Availability: Back Order
Item #: DFR0521 -
Price: $13.62
DFRobot

micro:bit is a pocket-sized microcontroller designed for kids and beginners to learn coding and electronics, letting them easily bring ideas into DIY digital games, interactive projects and...

micro:bit is a pocket-sized microcontroller designed for kids and beginners to learn coding and electronics, letting them easily bring ideas into DIY digital games, interactive projects and robotics.Micro:bitHowever, on-board I/O rings and crocodile clips sometimes are not handy and safe enough to connect peripherals. To explore more possibilities with micro:bit, we have designed the micro:bit Expansion Board for Boson, a carry-on board that connects to micro:bit via edge connector.The...

micro:Gamepad

Stocked
Availability: Stocked
Item #: DFR0536 -
Price: $34.33
DFRobot

INTRODUCTION GamePad for micro:bit V4.0 is a micro:bit gamepad with a joystick. It adopts a high-precision three-axis analog amount joystick. The combination of joystick and gamepad allows...

INTRODUCTION GamePad for micro:bit V4.0 is a micro:bit gamepad with a joystick. It adopts a high-precision three-axis analog amount joystick. The combination of joystick and gamepad allows you to control Maqueen's direction and speed at the same time. Moreover, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have put the external battery box to onboard PCB, which is more...

micro:Maqueen Mechanic - Beetle

Stocked
Availability: Stocked
Item #: ROB0156-B -
Price: $26.71
DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Use this kit to change your Maqueen Lite and Maqueen Plus into a Mechanic Beetle!...

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Use this kit to change your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws, etc. Just a simple installation, your Maqueen car (Lite or Plus) is ready to go.This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come...

micro:Maqueen Mechanic - Forklift

Back Order
Availability: Back Order
Item #: ROB0156-F -
Price: $18.43
DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Equip Maqueen Plus with this Mechanic- Forklift kit to allow it to...

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Equip Maqueen Plus with this Mechanic- Forklift kit to allow it to simulate the movement of a forklift! Program it to lift an object, fork and transfer items, just like a real forklift in a factory. It is compatible with Maqueen Lite and Maqueen Plus. This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from...

micro:Maqueen Mechanic - Push

Stocked
Availability: Stocked
Item #: ROB0156-P -
Price: $18.43
DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately.Turn your Maqueen Plus into a bulldozer with this Mechanic-Push kit. Then, it can...

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately.Turn your Maqueen Plus into a bulldozer with this Mechanic-Push kit. Then, it can be used in applications like football match, venue cleaning and so on. Just a simple installation, your Maqueen Lite or Maqueen Plus is ready to go.This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun...

micro:Maqueen Plus - an Advanced STEM Education Robot for micro:bit

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: MBT0021-EN -
Retail: $93.08
Price: $71.60
DFRobot

INTRODUCTION micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger capacity power supply,...

INTRODUCTION micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger capacity power supply, it can be perfectly compatible with HuskyLens AI Vision Sensor, which makes it an accessible AI robot teaching tool. In addition, micro:Maqueen Plus comes with a larger and more stable chassis, more built-in functions and more expansion ports, it is not only suitable for classroom teaching, but also...

micro:Maqueen Plus with micro:Maqueen Mechanic

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: MBT0021-EN-3 -
Retail: $146.81
Price: $112.93
DFRobot

micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger capacity power supply, it can be...

micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent. Optimized with better power management and larger capacity power supply, it can be perfectly compatible with HuskyLens AI Vision Sensor, which makes it an accessible AI robot teaching tool. In addition, micro:Maqueen Plus comes with a larger and more stable chassis, more built-in functions and more expansion ports, it is not only suitable for classroom teaching, but also can be...

Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)

Back Order
Availability: Back Order
Item #: DFR0518 -
Price: $10.18
DFRobot

Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series...

Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch between 3V-5V, allowing up to 5V 2A digital (PWM) output.Micro:Mate is in the same dimension of micro:bit. It connects to micro:bit through contact pins (with spring loaded), ensuring easy, compact...

Mini Piano Module with I2C Interface for Micro: bit

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-MIB02414P -
Price: $23.37
Elecrow

Do you want to make your Micro: bit to be an instrument? Maybe we can make your dream come true with this piano module. There is interface for you to plug into your Micro: bit, four RGB LEDs make...

Do you want to make your Micro: bit to be an instrument? Maybe we can make your dream come true with this piano module. There is interface for you to plug into your Micro: bit, four RGB LEDs make your board colorful. This piano module has capacitive touch chip that leads to 13 touch keys to simulate your piano keys, you can play your favorite music. Making your Micro: bit an instrument with this piano module without hesitation. Features 4 RGB LEDs, controlled by only one signal pin. Extending...

Protect Your Pi ! 32 IO Points for Raspberry Pi

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-RA0075KIT -
Price: $25.04
Elecrow

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

Qwiic UV Sensor - ZOPT2201

Back Order
Availability: Back Order
Item #: SPX-14264 -
Price: $20.76
Sparkfun

"It’s beautiful here in Boulder, Colorado, but any newcomer to the area quickly discovers our wonderful 300 days of sunshine is tempered with the fact that Boulder is located at 5,430 ft...

"It’s beautiful here in Boulder, Colorado, but any newcomer to the area quickly discovers our wonderful 300 days of sunshine is tempered with the fact that Boulder is located at 5,430 ft (1655m) above sea level. You can get a sunburn incredibly fast here! The ZOPT2201 is an excellent UVBS (ultraviolet energy sensor) in that it does true 310nm UVB sensing, not interpolated UV from ambient light like most sensors on the market. Without fuss or weird look up tables this sensor gives the...

Raspberry Pi 3B+ Case with Cooling Fan + Heatsinks

Back Order
Availability: Back Order
Item #: EL-RPA07510C -
Price: $18.35
Elecrow

This case is specially designed for Raspberry Pi 3B+, and it is compatible with Raspberry Pi 3/ 2 Model B. The unique fit design allows the Raspberry Pi to be better placed, it is easy to install....

This case is specially designed for Raspberry Pi 3B+, and it is compatible with Raspberry Pi 3/ 2 Model B. The unique fit design allows the Raspberry Pi to be better placed, it is easy to install. It comes with a cooling fan in it and 3 pieces aluminum heat sink for your Raspberry Pi better heat dissipation.Features2 head cooling fan is good for heat dissipation.Compatible with Raspberry Pi 3, 2 and B+.Easy to install.Package listRaspberry Pi 3B+ case x 12 head cooling fan x 1Heat sinks (one...

Raspberry Pi B+ Acrylic Enclosure

Back Order
Availability: Back Order
Item #: FIT0392 -
Price: $7.76
DFRobot

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all...

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing...

Raspberry Pi GPIO Extension Board

Back Order
Availability: Back Order
Item #: DFR0312 -
Price: $13.70
DFRobot

You may have noticed that the MCU on Raspberry Pi is much more complicated than the one on Arduinos. It is usually BGA encapsulated, and stacked with one DDR memory. That means short circuiting the...

You may have noticed that the MCU on Raspberry Pi is much more complicated than the one on Arduinos. It is usually BGA encapsulated, and stacked with one DDR memory. That means short circuiting the GPIO can be fatal - burning the CPU on Raspberry Pi, and unlike the arduino UNO, there is no comeback.So we made this GPIO Extension Board for Raspberries Pi, with protection design. Normally there is no level conversion on extension boards, which means inadequate load capacity which may lead to...

Raspberry Pi Heatsink Pack

Stocked
Availability: Stocked
Item #: FIT0542 -
Price: $2.22
DFRobot

This is a heatsink pack for Raspberry Pi. It contains 3 different heatsink which respectively correspond 3 different chips. It is a perfect solution for cooling the operating temperature when the...

This is a heatsink pack for Raspberry Pi. It contains 3 different heatsink which respectively correspond 3 different chips. It is a perfect solution for cooling the operating temperature when the Raspberry Pi are dealing with complicated work.|Specification|Size:Black with adhesive heat sink (large): 14 * 14 * 7mmBlack with adhesive heat sink (small): 9 * 9 * 5mmSeparate copper with adhesive heat sink: 12 * 12 * 1mmHeat sink with adhesive tapeMaterial: copper and aluminumWeight:...

Raspberry PI nRF24 Add-on V1.0

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-COD02410N -
Price: $58.78
Elecrow

Raspberry PI nRF24 Add-on for Raspberry PI platform. Integrated on-chip transceiver nRF24L01 + PA and LNA allows you to create a wireless connection between the terminal devices (sensors, etc.) and...

Raspberry PI nRF24 Add-on for Raspberry PI platform. Integrated on-chip transceiver nRF24L01 + PA and LNA allows you to create a wireless connection between the terminal devices (sensors, etc.) and servers. The Raspberry PI nRF24 Add-on added all the ingredients needed to make Raspberry PI in a completely finished and inexpensive gateway to build a heterogeneous environment for the smart home. Many Open Source controllers and accessible library will allow you to create any kind of smart,...

Raspberry Pi Zero

Out of Stock
Availability: Out of Stock
Item #: EL-RPD08812Z -
Price: $42.16
Elecrow

Raspberry Pi Zero is a a super-small, hackable, and ultra-low-cost computer. It is half of the size of a Model A+, with twice the utility. It just looks like a slimmed down version of the Raspberry...

Raspberry Pi Zero is a a super-small, hackable, and ultra-low-cost computer. It is half of the size of a Model A+, with twice the utility. It just looks like a slimmed down version of the Raspberry Pi we know and love. It's kind of like the little brother to the Pi 2 - with just a micro SD card slot, a mini HDMI port, two micro USB ports (one for power, one for USB), and 512MB of RAM. It has a single-core 1 GHz processor chip, similar to the Pi A+ and B+. Actually it’s 40% faster than the...

Raspberry Pi Zero W

Out of Stock
Availability: Out of Stock
Item #: EL-RPD08818W -
Price: $55.29
Elecrow

Raspberry Pi Zero W is a super-small, hackable, and ultra-low-cost computer, with mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO as its bigger brothers. It takes the beloved and extremely...

Raspberry Pi Zero W is a super-small, hackable, and ultra-low-cost computer, with mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO as its bigger brothers. It takes the beloved and extremely popular Pi Zero and adds wireless LAN and Bluetooth, making it perfect for embedded Internet of Things projects.The size of the Zero makes it easy to embed in almost any device and the integrated Wi-Fi and Bluetooth of the W will help keep that form factor by not needing the bulky USB OTG adapter...

RaspiRobot Board

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: KIT-11561 -
Price: $35.95
Sparkfun

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may...

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren't one of them. That's why the RaspiRobot project got started. The RaspiRobot board is an expansion board for the Pi that turns it into a robot controller. The board comes as a kit of through-hole parts which is easy to...

Speech Interaction Board for Raspberry Pi

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-RPA12579I -
Price: $13.19
Elecrow

Speech Interaction board for Raspberry Pi is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible...

Speech Interaction board for Raspberry Pi is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on. There are 2 microphones on both sides of the board for collecting sounds and it also provides 2 APA102 RGB LEDs, 1 User Button and 2 on-board Grove interfaces for expanding your applications. What is more, 3.5mm...

Transparent Acrylic Shell for Micro: bit Development Board

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-DTS10005S -
Price: $4.17
Elecrow

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is...

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is no lock, so it is easy to assemble. It is designed for Micro: bit development board, the high practical value and beautiful looking can be a great choice for you. Specifications Color: transparent Size: 33x86mm Material: acrylic Package list Transparent Acrylic Shell for Micro: bit x 1 ...

USB Hub 4 Port

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-ACA11004U -
Price: $4.62
Elecrow

This is a cute 4-channel USB Hub. It is like the body of a little boy, with 4 USB connectors at legs and foots. It supports the 480M bps USB2.0 and compatible with USB1.1 and 1.0. with this module,...

This is a cute 4-channel USB Hub. It is like the body of a little boy, with 4 USB connectors at legs and foots. It supports the 480M bps USB2.0 and compatible with USB1.1 and 1.0. with this module, you can connect more USB devices or modules to USB host such as a Raspberry Pi or PC. FeaturesIncrease 4x USB portsSupports USB 2.0, runs at 480MbpsUSB 1.1 compatiblePlug and playSystems supported: Win95/98/Me/2000/XP/win 7,MAC OS XPowered by USB port, no external power needed ...

USB/TTL Raspberry Pi GPS Tracker

Back Order
Availability: Back Order
Item #: TEL0119 -
Price: $51.54
DFRobot

USB/TTL Raspberry Pi GPS tracker is a small GPS location module. It is using L80-39 GPS chip, which includes 66 search channels and 22 simultaneous tracking channels. These features can improve its...

USB/TTL Raspberry Pi GPS tracker is a small GPS location module. It is using L80-39 GPS chip, which includes 66 search channels and 22 simultaneous tracking channels. These features can improve its satellites connection speed.GPS tracker has USB and TTL two ports, it is easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. And it is totally compatible with most of Raspberry Pi, like Raspberry Pi 3 Model B, Raspberry Pi 2 Model B, A+, B+, Zero .etc.The GPS module...

Wireless Keyboard with Touchpad for Raspberry Pi and LattePanda

Back Order
Availability: Back Order
Item #: DFR0330 -
Price: $33.62
DFRobot

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design...

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry and operate. Build-in removable rechargable Li-ion battery that has longer standby time. Perfect for PC, Pad, Andriod TV Box, Google TV Box, Xbox360, PS3, HTPC/IPTV, and Raspberry Pi etc.Notice: After 3 minutes without any operating will swtich to sleep mode, press any key about 1s...

WiringPi Board

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-RPB4809WP -
Price: $1.45

Raspberry Pi 4 Model B (4 GB)

Out of Stock
Availability: Out of Stock
Item #: DEV-15447 -
Price: $132.19
Sparkfun

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The...

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 4GB DDR4 RAM version of this board has the ability to run two 4k monitors at once via two micro HDMI ports and features the long-asked-for, true Gigabit Ethernet. This creates a much higher-performing multimedia experience with the new Pi! In addition to two USB2 ports, the Raspberry Pi 4 also has...