All Items
In Stock
Products 513-576 of 630
Show
Availability: Out of Stock
Item #: DFR0553 -

Gravity: I2C ADS1115 16-Bit ADC Module (Arduino & Raspberry Pi Compatible)

Out of Stock
Price: $18.93 inc GST

DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure...

DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.Raspberry Pi is a common master control board which is powerful in its functions, but the I/O pins of Raspberry Pi can read digital signals only, what's more, only through an external analog-to-digital conversion (ADC) module can it read signals of analog...

Availability: Stocked-NoBackOrder
Item #: DFR0565 -

Gravity: Digital I2C Signal Isolator

Stocked-NoBackOrder
Price: $30.59 inc GST

INTRODUCTION Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventing mutual interference between the...

INTRODUCTION Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventing mutual interference between the sensor modules. This digital signal isolator can be used for multi-parameter water quality detection systems to prevent water quality sensors from interfering with each other.In many cases, interference sources are existing. For example, a running pump in a fish tank will release signals into the...

Availability: Out of Stock
Item #: KIT0139 -

Gravity: Throw-in Type Liquid Level Transmitter

Out of Stock
Price: $88.24 inc GST

INTRODUCTION This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology. The level...

INTRODUCTION This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology. The level transmitter receives different pressures at different depths of liquid, which can be converted into corresponding current signals and output through the sensor. In this way, the depth of liquid can be measured. The shell of the transmitter is made of stainless steel, anti-corrosion and easy to clean. It can...

Availability: Out of Stock
Item #: TOY0065 -

Bare Conductive Touch Board Starter Kit

Out of Stock
Price: $267.02 inc GST

If you've ever thought about making a poster play your favourite song, giving objects the ability to speak, or creating hidden sensors in your house, then the Bare Conductive Touch Board Starter Kit...

If you've ever thought about making a poster play your favourite song, giving objects the ability to speak, or creating hidden sensors in your house, then the Bare Conductive Touch Board Starter Kit is for you.Each kit contains a Touch Board, Electric Paint, and everything you need to start transforming the world around you. There is no need for programming expertise! The Touch Board Starter Kit comes ready to plug and play, so you can create any of its three featured projects right out of the...

Availability: Out of Stock
Item #: FIT0232 -

BarePaint - Conductive Paint (50ml)

Out of Stock
Price: $49.82 inc GST

BarePaint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls,...

BarePaint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. Standard acrylic or water-based paints can even be used alongside Bare Paint to act as insulation or to create multi-layer circuitry! You can apply Bare Paint like any other water-based paint. You can use a brush, a roller, printmaking equipment, some intrepid users have...

Availability: Out of Stock
Item #: FIT0264 -

BarePaint - Conductive Paint Pens (10ml)

Out of Stock
Price: $22.24 inc GST

Bare Paint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls,...

Bare Paint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. Standard acrylic or water-based paints can even be used alongside Bare Paint to act as insulation or to create multi-layer circuitry!You can apply Bare Paint like any other water-based paint.This conductive paint pen is easy to carry and draw a picture. Whenever,with it...

Availability: Out of Stock
Item #: KIT0032 -

Glowing House Set - BARE Conductive

Out of Stock
Price: $50.08 inc GST

Bare Paint is the first non-toxic electrically conductive paint available to consumers today! This unique child-friendly material is designed for people of all ages to explore and learn about...

Bare Paint is the first non-toxic electrically conductive paint available to consumers today! This unique child-friendly material is designed for people of all ages to explore and learn about electronics with an inclusive, easy-to-use material. Bare's House Kit contains all the components you need to make TWO light sensitive paper houses using a Bare Paint Pen. These paper houses light up in the dark, as seen in this tutorial. This kit is appropriate for makers of all ages, though assembly...

Availability: Out of Stock
Item #: DFR0369 -

4.3 Inch E-Paper 800x600

Out of Stock
Price: $99.97 inc GST

This is a 4.3-inch e-ink display module, supports a maximum resolution of 800x600, using serial communication, built-in Chinese and English fonts. It also supports low power consumption mode. If you...

This is a 4.3-inch e-ink display module, supports a maximum resolution of 800x600, using serial communication, built-in Chinese and English fonts. It also supports low power consumption mode. If you don't want to know the complex working theory of E-ink screen, or the algorithms of graphics, text, and pictures, it will be your best choice. You only need a serial port to implement all features, let it go! Unleash your creative potential.4.3 Inch E-Paper Project4.3 Inch E-Paper Project 1:...

Availability: Out of Stock
Item #: FIT0176 -

EL Splitter Connector

Out of Stock
Price: $2.57 inc GST

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which...

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make sure that the total length of EL does not exceed what the inverter can drive! |Specification| Use our splitters to add more wire to your Inverters and Sequencers Total Length: 40cm (16") Can be connected...

Availability: Out of Stock
Item #: DFR0185-GB -

EL Wire - Gray Blue

Out of Stock
Price: $12.58 inc GST

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to...

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very low current. We have 10 different colors of EL Wire to choose from. |Applications| Indoor and outdoor advertisement, picture and logo, shop window, door, furniture, wall, roof, etc. Car, boat and other vehicles decoration: inside and outside decoration, number display. Safety sign...

Availability: Out of Stock
Item #: DFR0185-R -

EL Wire - red

Out of Stock
Price: $12.58 inc GST

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to...

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very low current. We have 10 different colors of EL Wire to choose from. |Applications| Indoor and outdoor advertisement, picture and logo, shop window, door, furniture, wall, roof, etc. Car, boat and other vehicles decoration: inside and outside decoration, number display. Safety sign...

Availability: Out of Stock
Item #: FIT0229 -

EL Wire 2xAA Pocket Inverter

Out of Stock
Price: $7.24 inc GST

This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time. 2 AA Batteries can power an 2.5m strand of EL Wire for about 8-10...

This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time. 2 AA Batteries can power an 2.5m strand of EL Wire for about 8-10 hours.We recomend you use the rechargeable batteries, though the operating time might be less. It comes with a constant on/off switch and blink mode. Takes 2xAA Battery (not included). The battery pack comes with a belt clip you can use that to attach to clothing, hats, etc... Battery pack comes with a...

Availability: Out of Stock
Item #: FIT0177 -

EL Wire Male/Female Set (30cm)

Out of Stock
Price: $1.71 inc GST

This product includes a pair in-line power wire connectors. If you have a project where you&;#39;d like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm &;#39;free...

This product includes a pair in-line power wire connectors. If you have a project where you&;#39;d like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm &;#39;free hanging&;#39; cable assembly that latches strongly. This is the matching connector to the inverter. It is required to connect EL wire to the inverter! 0.1" (2.54mm) pitch connector on the end. Warnings: If you&;#39;re using this for DC power or signal,please triple-check the polarity before plugging it...

Availability: Stocked-NoBackOrder
Item #: FIT0151 -

DC Barrel Jack Adapter - Female

Stocked-NoBackOrder
Price: $3.28 inc GST

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm(0.22x0.08"), center-positive female barrel jack. If you have a...

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm(0.22x0.08"), center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution. |ShippingList| DC Barrel Jack Adapter Female x1

Availability: Stocked-NoBackOrder
Item #: FIT0110 -

DC Barrel Jack Adapter - Male

Stocked-NoBackOrder
Price: $3.23 inc GST

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare...

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution. With this Power Jack, you can feed various power source to your Arduino project, from 9V battery to 6xAA battery. A sample use is illustrated below. The 9V battery clip is also available at This picture is...

Availability: Stocked-NoBackOrder
Item #: FIT0043 -

9V to Barrel Jack Adapter V2

Stocked-NoBackOrder
Price: $2.93 inc GST

This is the second version of the 9V to Barrel Jack Adapter. In this version the material for the 9V battery jack is hard plastic, which makes it easier to connect and disconnect You can plug a 9V...

This is the second version of the 9V to Barrel Jack Adapter. In this version the material for the 9V battery jack is hard plastic, which makes it easier to connect and disconnect You can plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack. Use this cable to battery-power any device that needs 9V and has an on-board barrel jack - it works great for Arduinos, development boards, evaluation boards and more! |ShippingList| 9V to Barrel...

Availability: Out of Stock
Item #: DFR0379 -

20W Adjustable DC-DC Buck Converter with Digital Display

Out of Stock
Price: $8.45 inc GST

This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 0~40V DC with an accuracy of ±...

This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 0~40V DC with an accuracy of ± 0.05V.On a regular buck converter there is no display and you have to measure the output manually with a multimeter, which can be slow and inefficient. This buck converter has a display with the output voltage readout integrated right in to the board. You can change the output by adjusting a screw...

Availability: Out of Stock
Item #: FIT0145 -

72W DC-DC Converter 12V@6A

Out of Stock
Price: $46.54 inc GST

This is a waterproof DC-DC converter. With 8-40V DC input, it converts to 12V@6A which is ideal supply for embedded PC and robot power.|Specification| Input Range: 8 - 40 V/DC Output Voltage: 12...

This is a waterproof DC-DC converter. With 8-40V DC input, it converts to 12V@6A which is ideal supply for embedded PC and robot power.|Specification| Input Range: 8 - 40 V/DC Output Voltage: 12 V/DC Output Current: 6A Size: 71*73*28(mm)/2.80inches * 2.87inches * 1.1inches) Waterproof ,Light compact Switching mode power supply Non-isolated Efficiency: 82~88%; Ambient temperature at -10 ? ~ 45 ?.|ShippingList| 72W DC-DC Converter x1 ...

Availability: Out of Stock
Item #: DFR0123 -

DC-DC boost converter

Out of Stock
Price: $12.93 inc GST

This is multipurpose boost converter, a breakout board. Supply voltage is as low as 3.7v and it boosts to as high as 34v. With this module, you can now power your Arduino with our 3.7V lipo battery...

This is multipurpose boost converter, a breakout board. Supply voltage is as low as 3.7v and it boosts to as high as 34v. With this module, you can now power your Arduino with our 3.7V lipo battery or use it to regulate any other project.The tiny form factor and its simplicty makes it for a very nice addition for all projects requiring an extra power module.Note: This board does not have reverse polarity protection, so please be sure to recognize the polarity of your connections! The input...

Availability: Out of Stock
Item #: FIT0471 -

DC-DC Boost Module (0.9-5V)

Out of Stock
Price: $6.72 inc GST

This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that...

This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. The maximum output current is up to 500 ~ 600 mA. There are two power input ports, PH2.0 and KF235-3.81-2P which are compatible with DFRobot's 3.7 V lithium battery.Note: Please pay attenetion to the battery polarity when connecting the...

Availability: Out of Stock
Item #: DFR0205 -

DC-DC Power Module 25W

Out of Stock
Price: $14.65 inc GST

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.You can choose 5V direct output...

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.You can choose 5V direct output voltage with the convenient on-board switch or adjust the output voltage by the blue & white resistor. Three different output interfaces for convenient and fast prototyping of projects with multiple voltage requirements.The Ovout (Original Voltage output) interface can output the power supply voltage of...

Availability: Out of Stock
Item #: FIT0199-R -

D65mm Rubber Wheel Pair - Red (Without Shaft)

Out of Stock
Price: $11.98 inc GST

These are typical rubber wheels for small robot mobile platforms. The tire is soft black rubber with light tread for added traction in rugged terrain. An axis adapter is needed which bolts to the...

These are typical rubber wheels for small robot mobile platforms. The tire is soft black rubber with light tread for added traction in rugged terrain. An axis adapter is needed which bolts to the back of the hub and mounts to a motor. this adapter(FIT0198) can mount to our Micro DC Geared Motor with Back Shaft(FIT0016). These motors are commonly used in our 4WD and 2WD platforms like Turtle (2WD Arduino Mobile Robot Platform), Pirate (4WD Mobile Platform), Baron(Arduino Mobile Robot Platform...

Availability: Out of Stock
Item #: FIT0500 -

D80mm Silicone Wheel For TT Motor

Out of Stock
Price: $2.59 inc GST

This is a DFRobot designed silicone wheel comes with high quality ABS material wheel hub and silicone wheel tire. To build your own robot, a proper wheel is always the first thing to look at. A nice...

This is a DFRobot designed silicone wheel comes with high quality ABS material wheel hub and silicone wheel tire. To build your own robot, a proper wheel is always the first thing to look at. A nice looking and soft tire will great make your robot project shine and stunning. This wheel is compatible with our TT Geared DC motors or TT Geared DC Motors with Encoders|Specification|Outside Diameter: 80 mmTire Width: 17 mmShaft hole Size: 5.4 mm in diameter, 3.1 mm thicknessWeight: 40...

Availability: Out of Stock
Item #: ROB0036 -

6 DOF Robotic Arm

Out of Stock
Price: $372.70 inc GST

Robotic arm has been covered a variety of fields, including manufacturing industry, medical treatment, security control and other application. It plays as an assistant, an operator or even a work...

Robotic arm has been covered a variety of fields, including manufacturing industry, medical treatment, security control and other application. It plays as an assistant, an operator or even a work partner, like “Jarvis”!DFLG6DOF is a bionic robotic arm, it consists of six servo motors, corresponding to the arm, elbow, wrist (2 degrees of freedom), five joints and one rotating base in all. Each joint can move in a certain range, and the base can be rotated about 180 degrees. With 24...

Availability: Out of Stock
Item #: ROB0049 -

2WD miniQ Robot Chassis

Out of Stock
Price: $59.21 inc GST

2WD miniQ robotic platform is especially designed for students and hobbyists. It's versatile and small, suitable for most indoors applications. It features high quality and powerful metal gear...

2WD miniQ robotic platform is especially designed for students and hobbyists. It's versatile and small, suitable for most indoors applications. It features high quality and powerful metal gear motors which make it a speedy robot. It is ideal for maze competition and educational courses, and is very easy to assemble, check out our assembly video below. Only requires 8 screws to get the job done and you can use our sample codes on our Wiki pages.If you are planning to get started building a...

Availability: Out of Stock
Item #: ROB0112 -

Devastator Tank Mobile Robot Platform

Out of Stock
Price: $120.50 inc GST

DFRobot proudly presents Devastator Tank Mobile Platform, our newest track mobile robot platform. It is fully compatible with most popular controllers in the market such as Arduino, Raspberry Pi and...

DFRobot proudly presents Devastator Tank Mobile Platform, our newest track mobile robot platform. It is fully compatible with most popular controllers in the market such as Arduino, Raspberry Pi and so on.The Devastator uses high strength aluminum alloy which makes it extremely solid and durable. The high speed motors and premium tracks also allows it to move swiftly everywhere. Whats more, it benefits from a high performance suspension and enjoys an outstanding mobility across even the...

Availability: Out of Stock
Item #: ROB0103 -

DIY B/O Spider Robot

Out of Stock
Price: $10.17 inc GST

Owning a spiderman is a colorful dream in everyone’s childhood. Here is the cute DIY Spider Robot making your dreams come true. With the DIY Spider Robot, you can design and manufacture a...

Owning a spiderman is a colorful dream in everyone’s childhood. Here is the cute DIY Spider Robot making your dreams come true. With the DIY Spider Robot, you can design and manufacture a robotic creature as your wish and under your control!Battery(1.2V) is included. Turn on the switch, you’ll find the little robotic creature is full of energy! The vivid DIY robotic spider with eight multi-jointed legs accurately duplicate the walking movement of real spider.There are two assembly...

Availability: Out of Stock
Item #: COMB0004 -

DIY Remote Control Robot Kit (Support Android)

Out of Stock
Price: $275.82 inc GST

This basic DIY Remote Control Robot Kit is designed for you to create a small autonomous or remote controlled robot. Although the kit includes all essential parts to make an autonomous robot, it is...

This basic DIY Remote Control Robot Kit is designed for you to create a small autonomous or remote controlled robot. Although the kit includes all essential parts to make an autonomous robot, it is intended to allow you to add your own electronics in order to satisfy your objectives. |Specification| Platform: Pirate-4WD Mobile Platform 4WD Mobile platform Motors: 3-12V DC peed: 90cm/s Dimensions: 200mm x 170mm x 105mm(7.87"x6.69"x4.13") Microcontroller: Romeo V2(an Arduino Robot Board) DC...

Availability: Out of Stock
Item #: DFR0271 -

GMR - General Mobile Robot controller

Out of Stock
Price: $51.54 inc GST

GMR is the abbreviation of General Mobile Robot controller. It's an integrated circuit board specifically designed for home robot platforms, such as HCR (Home Care Robot). In this integrated version...

GMR is the abbreviation of General Mobile Robot controller. It's an integrated circuit board specifically designed for home robot platforms, such as HCR (Home Care Robot). In this integrated version of GMR, you will need three microncontrollers (MCUs): two Arduino Nano / Dream Nano and one Arduino Mega /Arduino Mega ADK, wherein one Nano works as motor control and data acquisition, and the other one as the ultrasonic sensor driver. The Arduino Mega /Mega ADK works as the main controller board...

Availability: Out of Stock
Item #: ROB0124 -

HCR - A Mobile Robot Platform Kit with Omni Wheels

Out of Stock
Price: $958.46 inc GST

HCR (Home Care Robot) with Omni wheels is a full metal open source mobile robot research platform designed for robotics research and service robot application development.Same as previous...

HCR (Home Care Robot) with Omni wheels is a full metal open source mobile robot research platform designed for robotics research and service robot application development.Same as previous generations, the structure of the HCR is divided into 3 layers, each with slots for installing distance sensors, servos or cameras. There is also plenty of space for other expansions modules. More than that, equipped with 3 high torque Omni wheels with encoders, it is capable of all-direction pinpoint...

Availability: Out of Stock
Item #: ROB0004 -

HCR - Mobile Robot Platform (Support Kinect)

Out of Stock
Price: $913.64 inc GST

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The kit contains two motors, two...

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates. Its support structure includes servos and sensors, with special interfaces for a mini - ITX motherboard.As the second generation of DFRobot's HCR (Home Care Robot) platform, we have equipped it with new motors and...

Availability: Out of Stock
Item #: ROB0021 -

HCR - Mobile Robot Platform with Sensors and Microcontroller

Out of Stock
Price: $1,235.51 inc GST

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two...

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates. Its support structure includes servos and sensors, with special interfaces for a mini - ITX motherboard.As the second generation of DFRobot's HCR (Home Care Robot) platform, we have equipped it with new...

Availability: Out of Stock
Item #: FIT0014 -

LG-NS Robot Gripper

Out of Stock
Price: $27.58 inc GST

How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded...

How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded components and can use two standard hobby servos (not included) for open and close and wrist rotate. The clamp open to 1.3" and the wrist rotates approximately 180 degrees. It needs only a screw driver for assembly. Notice Compatible servo: Hitec 422 servos |Specification| Max clamp width: 1.3" Size:...

Availability: Out of Stock
Item #: DFR0029-R -

Gravity: Digital Push Button (Red)-DFRobot

Out of Stock
Price: $2.93 inc GST

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An...

Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, especially with the plastic cap off. The long pressable life also ensures its durability. |Features| Wide voltage range from 3.3V to 5V Standard assembling structure (two 3mm diameter holes with multiple of...

Availability: Out of Stock
Item #: FIT0494 -

N20 ABS Rubber Wheel 43x9mm (Pair)

Out of Stock
Price: $9.98 inc GST

This custom-designed rubber wheel has a rubber tire with a diameter of 1.69" (43 mm). It is designed to fit the output shafts on our mini metal gear motors as well as the Solarbotics metal gear...

This custom-designed rubber wheel has a rubber tire with a diameter of 1.69" (43 mm). It is designed to fit the output shafts on our mini metal gear motors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback.Gear motors should be mounted onto the side of the hub with the protruding teeth. The output shaft will slide into the socket easily at first but will achieve a snug fit when pressed through to the other edge...

Availability: Out of Stock
Item #: FIT0336 -

Rubber Wheel (Compatible with Servo &; Motor)

Out of Stock
Price: $8.10 inc GST

This rubber wheel is used in our popular 4WD mobile platforms. It can be mounted directly onto micro gear motors, but also compatible with our most servos.|Specification| Outer Diameter: 80mm(3.15")...

This rubber wheel is used in our popular 4WD mobile platforms. It can be mounted directly onto micro gear motors, but also compatible with our most servos.|Specification| Outer Diameter: 80mm(3.15") Wheel Width:30 mm(1.18") Axle Pore Size: 5.8mm(diameter)×3.5mm?thickness? (0.23"x0.14") Axle depth:7.6mm(0.30")|ShippingList| Rubber Wheel(Compatible with Servo&Motor) x2 ...

Availability: Out of Stock
Item #: FIT0300 -

Robot Gripper - Extra Width

Out of Stock
Price: $33.62 inc GST

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other...

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo.Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most servos such as Hitec 422,475, DSS-P05 Standard Servo, DF Metal Geared 15Kg Standard Servo. |Specification| Clamp range:0-54mm (0-2.13") Size:105x100x30mm (4.13x3.94x1.18")|ShippingList| Robot Gripper-Extra Width...

Availability: Out of Stock
Item #: ROB0055 -

Rover 5 Tank Chassis (2 motors)

Out of Stock
Price: $67.23 inc GST

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis&;rsquo;s the clearance can be adjusted by rotating the gearboxes...

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis&;rsquo;s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. &;ldquo;Stretchy&;rdquo; rubber treads maintain tension as the clearance is raised.Inside of the chassis are 4 noise suppression coils at the bottom and a battery holder that accepts 6x AA batteries (not included). It is recommended to use NiMh batteries as they last longer...

Availability: Out of Stock
Item #: ROB0055-4M4E -

Rover 5 Tank Chassis (4 motors with 4 Encoders)

Out of Stock
Price: $124.06 inc GST

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes...

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised.Inside of the chassis are 4 noise suppression coils at the bottom and a battery holder that accepts 6x AA batteries (not included). It is recommended to use NiMh batteries as they last longer and...

Availability: Out of Stock
Item #: ROB0109 -

Sparki Robot - the easy robot for everyone

Out of Stock
Price: $256.94 inc GST

Sparki is an affordable, easy to use, and fun intro to programming, electronics, and robotics. It is geared towards kids elementary-age and above, educators looking for an easy intro to robotics,...

Sparki is an affordable, easy to use, and fun intro to programming, electronics, and robotics. It is geared towards kids elementary-age and above, educators looking for an easy intro to robotics, parents eager to find something affordable but educational and fun, DIY enthusiasts, and more. It is simple enough for beginners, while being feature-packed enough to be a must-have for pro-users. Sparki is your chance to have your very own robot, completely open source and available to do your...

Availability: Out of Stock
Item #: FIT0085 -

Wheel 42x19mm (Pair)

Out of Stock
Price: $5.00 inc GST

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear...

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. This rugged wheel is designed to fit securely on the output shafts of the micro metal geramotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth. The output shaft...

Availability: Out of Stock
Item #: DFR0350 -

Romeo for Intel? Edison Controller (With Intel? Edison)

Out of Stock
Price: $154.28 inc GST

Romeo for Intel® Edison is a multi-purpose, all-in-one development platform based on Intel Edison and Arduino SoC. It is especially designed to be useful for robotics applications. Romeo for...

Romeo for Intel® Edison is a multi-purpose, all-in-one development platform based on Intel Edison and Arduino SoC. It is especially designed to be useful for robotics applications. Romeo for Intel® Edison is compatible with Arduino open source platform and Linux, and supports Java and C development environment. Users are able to extend this platform with thousands of existing shields and modules such as switches, sensors, LEDs, servos, motors easily with Romeo for Intel Edison. It can...

Availability: Out of Stock
Item #: TEL0108 -

Bluetooth Audio Receiver and Playback Module (Bluetooth 4.0)

Out of Stock
Price: $25.84 inc GST

This Bluetooth Audio receiver module includes a USB port and TF card slot. With a pre-amp output, you can drive headphones or a 3W speaker directly. You can also add an active power amplifier and...

This Bluetooth Audio receiver module includes a USB port and TF card slot. With a pre-amp output, you can drive headphones or a 3W speaker directly. You can also add an active power amplifier and connect a loudspeaker. The module supports MP3, WMA, WAV and lossless FLAC audio formats.This module supports playback from TF or USB flash drive. All playback is controlled by buttons, and an sound equalizer has build-in to meet different favor. With its compact form factor and 5V DC power...

Availability: Stocked-NoBackOrder
Item #: TEL0095 -

iBeacon Module (Bluetooth 4.0)

Stocked-NoBackOrder
Price: $25.69 inc GST

What is iBeacon?iBeacon is a protocol standardised by Apple and introduced at the Apple Worldwide Developers Conference in 2013. Various vendors have since made iBeacon-compatible hardware...

What is iBeacon?iBeacon is a protocol standardised by Apple and introduced at the Apple Worldwide Developers Conference in 2013. Various vendors have since made iBeacon-compatible hardware transmitters - typically called beacons- a class of Bluetooth low energy devices that broadcast their identifier to nearby portable electronic devices. The technology enables smartphones, tablets and other devices to perform actions when in close proximity to an iBeacon.What can I do with iBeacon?One...

Availability: Out of Stock
Item #: TEL0084 -

BLE Micro - Super Compact BLE Module

Out of Stock
Price: $17.07 inc GST

Bluno is great but I want small size for my product; Ble-link does well in its work but I don't want additional adapter to be inserted. Now, these problems are solved with BLE(bluetooth low energy)...

Bluno is great but I want small size for my product; Ble-link does well in its work but I don't want additional adapter to be inserted. Now, these problems are solved with BLE(bluetooth low energy) Micro, a new bluetooth 4.0 device. Comes in a small size at 24*15mm, BLE Micro can be easily put onto your PCB board, just ignore the problems like "how to design an antenna", "how to make a bluetooth chip work" and so on.BLE Micro is perfect for wearable projects. With it, you will be able to use...

Availability: Out of Stock
Item #: KIT0126 -

Bone Conduction Kit

Out of Stock
Price: $42.23 inc GST

Bone conduction is a way of sound transmission. The sound is converted into different frequencies of mechanical vibration, and transmitted through human skull, bone labyrinth, inner ear lymphatic...

Bone conduction is a way of sound transmission. The sound is converted into different frequencies of mechanical vibration, and transmitted through human skull, bone labyrinth, inner ear lymphatic transmission, helix, auditory nerve, auditory center.Bone conduction headphonesThis kit is composed by a bone conduction speaker, a speaker driver board and other kinds of accessories. This kit is intended to help understand the principles of bone conduction technology, making hearing aids or bone...

Availability: Out of Stock
Item #: DFR0296 -

Bluno Nano - An Arduino Nano with Bluetooth 4.0

Out of Stock
Price: $42.92 inc GST

Here comes the second member in DFRobot Bluno family, the Bluno Nano. Came in a size of a gum, the Bluno Nano is perfect for BLE projects with limited space or weight. Everything is getting smart...

Here comes the second member in DFRobot Bluno family, the Bluno Nano. Came in a size of a gum, the Bluno Nano is perfect for BLE projects with limited space or weight. Everything is getting smart now: wristbands and watches monitor your daily behaviors and become social; phone-controlled camera add-ons move and take shots as you like; smart gardens grow virtually in your ipad and sharing is made easy... The Bluetooth Low Energy technology has made it easy and achievable. It is exciting to see...

Availability: Out of Stock
Item #: DFR0304 -

BLE Wireless Gamepad V2

Out of Stock
Price: $97.40 inc GST

Wondering if your newly bought gamepad can be used to both playing games and controlling a robot? The new BLE 4.0 wireless gamepad V2.0 produced by DFROBOT can meet all your requirements. Based on...

Wondering if your newly bought gamepad can be used to both playing games and controlling a robot? The new BLE 4.0 wireless gamepad V2.0 produced by DFROBOT can meet all your requirements. Based on TI CC2540 Bluetooth chip design, it is specially designed for DIY players and does not need programming. This gamepad is using hardware scanning structure, high respond speed and supports one keyboard toggle between central and peripheral roles. Under central device mode, it can be connected to any...

Availability: Out of Stock
Item #: TEL0087 -

Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle

Out of Stock
Price: $17.07 inc GST

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low...

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you could use this adapter to receive/transmit data. With two USB-BLE Link users can do point-to-point wireless transparent transmission, master-slave machine setting, and wireless programming. It can also work as a PC BLE wireless programming adapter. Comaptible all DFRobot BLE series...

Availability: Out of Stock
Item #: DFR0329 -

Bluno M3 - A STM32 ARM with Bluetooth 4.0 (Arduino Compatible)

Out of Stock
Price: $51.54 inc GST

The Bluno M3 is a new Arduino compatible prototyping platform based on a 32-bit ARM processor. This arduino microcontroller integrates a Bluetooth 4.0 chip and a STM32 ARM controller on the board....

The Bluno M3 is a new Arduino compatible prototyping platform based on a 32-bit ARM processor. This arduino microcontroller integrates a Bluetooth 4.0 chip and a STM32 ARM controller on the board. As a member of Bluno family, Bluno M3 inherits most common Bluno features, such as bluetooth connectivity, Bluetooth wireless programming and mobile phone controlling. In addition, thanks to its new 32-bit microcontroller, Bluno M3 has a much more powerful performance, more storage space and more...

Availability: Out of Stock
Item #: TOY0059 -

Creator-4Shuttlecock Kit

Out of Stock
Price: $13.79 inc GST

Playing shuttlecock has been a traditional leisure activity in China, in which players try to keep a weighted shuttlecock in the air using their feet, shin, knee without using the hands. According...

Playing shuttlecock has been a traditional leisure activity in China, in which players try to keep a weighted shuttlecock in the air using their feet, shin, knee without using the hands. According to study, the first form of shuttlecock playing was discovered during the Spring and Autumn Period, which was over 2000 years ago. Now, this traditional game has evovled and is played on a court similar to badminton and volleyball, or be played artistically, among a circle of players in a street or...

Availability: Out of Stock
Item #: FIT0210 -

Crimp Pins for Female Housing Pins(PH2.54)

Out of Stock
Price: $1.71 inc GST

This is a package of crimp pins for female housing pins with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced male pins. |ShippingList| Crimp Pin for Female...

This is a package of crimp pins for female housing pins with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced male pins. |ShippingList| Crimp Pin for Female Housing Pin(PH2.54) x50

Availability: Stocked-NoBackOrder
Item #: DFR0375 -

Cookie I/O Expansion Shield

Stocked-NoBackOrder
Price: $13.45 inc GST

The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections...

The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections from destroying the board. The board is protected from reverse voltage input. And connector ports only accept connections the correct way around. These fail safes make the board ideal for beginners and classroom settings - no need to worry about your students making the wrong connections!|Specificati...

Availability: Out of Stock
Item #: DFR0483 -

FireBeetle Covers-Gravity I/O Expansion Shield

Out of Stock
Price: $11.89 inc GST

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption,...

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types of FireBeetle, containing Boards (main control), Covers (expansion boards) and related Accessories. FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules. With this...

Availability: Out of Stock
Item #: TEL0122 -

FireBeetle Covers-LoRa Radio 915MHz

Out of Stock
Price: $30.86 inc GST

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient...

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main control), Covers (expansion boards) and related Accessories.FireBeetle LoRa 915MHz wireless transmission module adopts a high-performance chip SX127x LoRa 915MHz and with built-in PA (power amplifier) gain,...

Availability: Out of Stock
Item #: DFR0154 -

I2C 20x4 Arduino LCD Display Module

Out of Stock
Price: $40.60 inc GST

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white characters on blue background.Generally, LCD display...

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white characters on blue background.Generally, LCD display will run out of Arduino pin resource. It needs 6 digital pins and 2 power pin for a LCD display. If you want to build a robot project, it will be a problem with Arduino UNO and LCD display. This I2C 20x4 LCD display module is designed for Arduino microcontroller. It is using I2C communication...

Availability: Out of Stock
Item #: FIT0348 -

Industrial pH Electrode - Armor Casing

Out of Stock
Price: $85.33 inc GST

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good...

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good reproducibility, difficult to hydrolysis, and basically eliminate the alkali error .In 0 to 14pH range,the output voltage of the electrode is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.The...

Availability: Out of Stock
Item #: DFR0008 -

Input Shield for Arduino

Out of Stock
Price: $27.67 inc GST

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data...

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless rocker button controller. The shield can be easily stacked on top of your Arduino boards. It can also connect with OLED2864 & OLED9664.|Features| Dual axis mini joystick Connects to your Arduino using male to...

Availability: Out of Stock
Item #: KIT0090 -

Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids

Out of Stock
Price: $64.64 inc GST

With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa-An Arduino Based Walking Robot...

With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa-An Arduino Based Walking Robot Kit For Kids.Tools Needed Soldering iron Scissors Screwdriver PliersVersion Update: The new Insectbot Hexa V2 uses Beetle BLE(The smallest Arduino bluetooth 4.0) instead of Beetle, which supports wireless programming and communication. Explore much more possibilities with Bluetooth 4.0!An apology:...

Availability: Out of Stock
Item #: DFR0489 -

FireBeetle ESP8266 IOT Microcontroller (Supports Wi-Fi)

Out of Stock
Price: $20.51 inc GST

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit...

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC and multiple interfaces such as HSPI, UART, PWM, I2C and I2S. In DTIM10, the full power consumption to maintain WiFi connection reached to 1.2mW. Equipped with 16MB outer SPI flash memory, ESP8266 is available for programs and firmware storage.Compatible with Arduino programming...

Availability: Out of Stock
Item #: SEN0170 -

Anemometer Kit (0-5V)

Out of Stock
Price: $94.04 inc GST

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard...

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition. Together with other components, this...

Availability: Out of Stock
Item #: ROB0140 -

Antbo DIY Robot Kit - The Best Robot for Kids

Out of Stock
Price: $205.14 inc GST

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation...

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation artificial neuron network through the movement system and optimized gait algorithm to simulate the movement of insects. Rich interactive mode allows users to interact with the robot to have a variety of interesting, but also can use the Antbo app to control robot or voice control.Antbo’s form takes...

Availability: Out of Stock
Item #: FIT0474 -

Acrylic Case for LattePanda - Cooling Fan Compatible!

Out of Stock
Price: $12.93 inc GST

This acrylic case is a solid enclosure for your LattePanda single board computer. It protects the board from ESD damage and the transparent acrylic lets you view the indicator LEDs directly. There...

This acrylic case is a solid enclosure for your LattePanda single board computer. It protects the board from ESD damage and the transparent acrylic lets you view the indicator LEDs directly. There is easy access to USB, HDMI, SD and GPIO and antenna. The design has been revised so that it can accommodate the LattePanda cooling fan kit. There is also plenty of room for mounting heatsinks to the CPU directly if you wish. Assembly is simple and printed assembly instructions are included. The...

Availability: Out of Stock
Item #: DWG0004-S -

Acrylic Romeo Base - Star

Out of Stock
Price: $2.67 inc GST

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO. It&;#39;s a nice gift for my UNO baby. It&;#39;s a nice shoe, a good protection, an eye-catching killer. Then my UNO...

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO. It&;#39;s a nice gift for my UNO baby. It&;#39;s a nice shoe, a good protection, an eye-catching killer. Then my UNO is extremely different to others. This time we offer more choise for the Xboard Relay and Romeo. Transparent acrylic panels looks crystal clear and clean. Two different choise for different hobbies. The basic version is a atable base and the special version is more eye-catching. My girl friend has...