Products 3121-3168 of 3179
Show
Weather Station Kit with Anemometer/Wind Vane/Rain Bucket
OOD!
Price: $237.89
View
Availability: Back Order
DFRobot Item #: SEN0186 -

Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and makes it easy to use with most controllers in the market.Together with other components, this iot weather station kit can be widely used in measureing wind/rain in engineering, railways, docks, power plants, meteorological, cableway, environment study, agriculture, energy monitoring, health study with...

Weather Station Kit with Solar Panel
OOD!
Price: $163.59
View
Availability: Back Order
DFRobot Item #: KIT0094 -

The fast pace of modern life greatens the distance between human and nature, making more kids caged in the concrete jungle. However, interacting with nature is an indispensable part in their growth. Weather itself, can be an accessible yet interesting subject for kids to study. Through meteorological observations, recording and analyzing, kids can literally learn and do science that is combined seamlessly with their daily life activities.From terraces to living rooms, in backyards and in...

Wheel - 65mm (Rubber Tire, Pair)
Price: $4.85
View
Availability: Stocked
Sparkfun Item #: ROB-13259 -

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you will be able to get almost any beginners robot project moving. These wheels are sold in packs of two. Documents: Product Video

Wheel 42x19mm (Pair)
OOD!
Price: $5.00
View
Availability: Back Order
DFRobot Item #: FIT0085 -

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder feedback. This rugged wheel is designed to fit securely on the output shafts of the micro metal geramotors. These gearmotors should be mounted onto the side of the hub with the protruding teeth. The output shaft...

Wheel Encoder Kit
OOD!
Price: $21.28
View
Availability: Back Order
Sparkfun Item #: ROB-12629 -

This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. These wheel encoders require a supply voltage of 3-24V with a supply current of 4mA. Features: Supply Voltage: 3-24V Supply Current: 4mA per sensor Output Voltage: 26V Max Output...

Whybricks (10 Student Pack)
Spotlight!
Price: $379.50
View
Availability: Stocked
Edison Item #: ED-WHY001 -

What is Whybricks? Whybricks is an engaging hands-on approach to teaching physical science. The construction system kit and lesson plans work seamlessly to be a complete STEM teaching resource. With Whybricks, educators can tap into students’ innate curiosity and explore physical science in meaningful ways. Whybricks helps make learning fun and relevant, with meaningful STEM extensions through engineering. The Whybricks kit Each Whybricks kit contains 2100 pieces to enable 10 students to work...

Wide Band 4G LTE Internal LoRa Antenna
OOD!
Price: $3.20
View
Availability: Back Order
Sparkfun Item #: WRL-17841 -

A Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF. This antenna is 53mm x 24mm with a 100mm length coaxial cable ending in an IPEX (u.FL equivalent) connector. The antenna has a 3M adhesive backing making it easy to fix it to your project. If you are looking for a board to use this antenna with, we highly recommend our SparkFun LoRa Thing Plus – expLoRaBLE board! Features: Frequency range:...

WiDo - An Arduino Compatible IoT (internet of thing) Board
OOD!
Price: $51.54
View
Availability: Back Order
DFRobot Item #: DFR0321 -

|Specification| Power Supply range: 5v or 7-12v Arduino Leonardo Compatible Integrate with WG1300 WIFI chip and support 2.4GHz IEEE 802.11 b/g network WIFi and MicroSD driven by SPI port On board 2.4G PCB Antenna Driver pins WIFI Module-D7(IRQ),D5(VBAT),D10(CS),D14(MISO),D15(SCK),D16(MOSI) MicroSD-D4(CS),D14(MISO),D15(SCK),D16(MOSI) User friendly Reset button Dimension: 72 mm x 55 mm(2.83" x 2.17")|Documents| Wiki Doc Arduino library Schematic WiDo with Ubidots|ShippingList| WiDo x1 ...

WiFi Module - ESP8266 (4MB Flash)
Price: $11.42
View
Availability: Out of Stock
Sparkfun Item #: WRL-17146 -

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all WiFi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that's just out...

WiFi Shield V2.2 for Arduino (802.11 b/g/n)
OOD!
Price: $131.10
View
Availability: Back Order
DFRobot Item #: TEL0047 -

DFRobot is very proud to release this first 802 b/g/n wifi shield in the Arduino market. The arduino shield uses WizFi210 which is a low power-consuming WIFI module which is applied with dynamic power management technology. When the WIFI module needs to be on but not work, it can be set to Standby mode a low power mode, and the module just needs to be woken up when it has to work.The WIFI wireless module is based on WizFi210. It provides the bridging from TTL serial port communication to...

WiFiBee-MT7681 (Support Arduino WiFi Wireless Programming)
OOD!
Price: $25.69
View
Availability: Back Order
DFRobot Item #: TEL0107 -

The WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module. It is compatible with an XBee slot, supports Arduino wireless programming and is ideal for Internet of Things (IoT), home automation and robotics applications.The WiFi Bee supports the IEEE802.11b/g/n standard protocols, with 2.4G Wi-Fi bands, 14 channels and WEP/WPA-PSK/WPA2-PSK/TKIP/AES encryption methods, compatible with many mainstream routers. It has STA and AP working modes, is free to switch, and...

WiiChuck Adapter (Arduino Compatible)
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: DFR0062 -

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. Compared with standard WiiChuck, the DFRobot WiiChuck has extra 4 pins which allow you connect it to two devices. The Wii Nunchuck is loaded with features -- a 2-axis joystick, two buttons and a 3 axis ?2g accelerometer -- and any...

Wild Thumper 6WD Chassis - Black (34:1 gear ratio)
Price: $459.92
View
Availability: Out of Stock
Sparkfun Item #: ROB-11056 -

This is easily the most rugged and beefy robot chassis in its price range. The Wild Thumper 6-Wheel platform is the best of both worlds: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base stock for a serious 'bot. Each of the six motors are mounted on independent suspension and outfitted with 34:1 steel gearboxes (no more stripped gears!). The motors are wired together on a terminal strip inside the 2mm thick anodized...

Wind & Water Power Turbines
Price: $7.47
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PS81110TR -

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines outputs small power for small projects such as LED, suitable for DIY projects. Note that the output of the turbine is AC, Rectifiers are needed if you want to change it into DC. As we tested, the turbines can power 5 LEDs with a wind speed 20 km/h, and 10 LEDs with a wind speed 50 km/h. you can use this...

Wire Connector Set
OOD!
Price: $0.52
View
Availability: Back Order
DFRobot Item #: FIT0452 -

This wire connector set is made by flame retardant material. It works very well in extreme environment. |Specification| Type: XPE012 Rated current: 10A Rated voltage: 380V Shell material: flame retardant Temperature resistance: 105 ? Connector: 2|ShippingList| Wire Connector Set x1 ...

Wire Strippers - 22-30AWG
OOD!
Price: $25.63
View
Availability: Back Order
Sparkfun Item #: TOL-14762 -

These are your basic, run-of-the-mill wire strippers from Techni-Tool with a comfortable grip making them an affordable option if you need to remove the protective sleeve from a desired wire. These are an essential part to any hacker's arsenal and are able to strip 22-30AWG (0.65-0.25mm) solid core wire nicely. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video ...

Wireless Charger& Receiver
Price: $14.55
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PCW2138WC -

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless...

Wireless GamePad V2.0 for Arduino
OOD!
Price: $102.57
View
Availability: Back Order
DFRobot Item #: DFR0182 -

The Wireless Joystick v2 for Arduino is the first gamepad based on Arduino from DFRobot. It support Xbee, Bluetooth, RF and Wifi via the Xbee socket. Makes it possible to custom your own wireless communication for controlling your robots, mobile platforms, UAVs and etc.This gamepad supplies two analog sticks, one reset button and 16 programmable buttons, using PS2 style button layout, which allows you to completely customize your controlling experience. It runs on three "AAA" Batteries or a...

Wireless Keyboard with Touchpad for Raspberry Pi and LattePanda
OOD!
Price: $33.62
View
Availability: Back Order
DFRobot Item #: DFR0330 -

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry and operate. Build-in removable rechargable Li-ion battery that has longer standby time. Perfect for PC, Pad, Andriod TV Box, Google TV Box, Xbox360, PS3, HTPC/IPTV, and Raspberry Pi etc.Notice: After 3 minutes without any operating will swtich to sleep mode, press any key about 1s...

Wireless SD Shield
Retail: $20.75
Price: $10.60
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCS01109S -

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it,you should select the switch to the right direction. About the wireless module, it only uses you two...

WiringPi Board
Price: $1.45
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RPB4809WP -

WRTnode Dev Cables Kit
OOD!
Price: $6.21
View
Availability: Back Order
DFRobot Item #: FIT0414 -

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable.WRTnode(A Mini OpenWRT Dev Board) is a high performance CPU, low power consuming, cheap and small dev board that can run OpenWRT OS and also easy to port all open source software of Linux. OpenWRT is a Linux distribution for embedded devices, the framework to build an application without having to build a...

WRTnode Standard Shield
OOD!
Price: $17.07
View
Availability: Back Order
DFRobot Item #: DFR0352 -

This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board.WRTnode ?A Mini OpenWRT Dev Board?uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome since there are only pin headers and Micro USB available onboard. This standard shielf for WRTnode not only expands GPIO, SPI, I2C, etc., but also expands the number of USB interfaces to four, at the same time providing...

WS2801 Breakout
Sale!
Price: $5.99
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-10504 -

WS2801 Breakout Description: This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one side and an RGB LED on the other. Several of these breakouts can be chained together to form a display or an addressable string. Voltage, ground, clock and data are broken out as input on one side and output on the other to standard 0.1" spaced headers. Documents: Schematic Eagle Files Datasheet (WS2801)...

WT8266-S1 WiFi Module Based on ESP8266
OOD!
Price: $11.89
View
Availability: Back Order
DFRobot Item #: TEL0109 -

WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc. The module's core processor arduino ESP8266 integrates an enhanced version of Tensilica's L106 Diamond series 32-bit processor with smaller package size and 16 bit compact mode, main frequency support 80 MHz and 160 MHz,...

XBee 1mW Trace Antenna - Series 1 (802.15.4)
Price: $43.39
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WRL-11215 -

"This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide! Note: If you are using these outside of...

XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh)
OOD!
Price: $46.37
View
Availability: Back Order
DFRobot Item #: TEL0059 -

This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware....

XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)
Price: $39.91
View
Availability: Back Order
Sparkfun Item #: WRL-10414 -

"This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2.5, but have updated...

XBee 3 Module - RP-SMA Antenna
Price: $38.89
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WRL-15130 -

After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 200ft indoor range, or 4000ft outdoor/line-of-sight range, you can set up a mesh network to talk to or communicate with various devices around your house, work, or other area. This module has the familiar XBee package while...

XBee 3 Module - U.FL Antenna
Price: $38.34
View
Availability: Out of Stock
Sparkfun Item #: WRL-15128 -

After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 200ft indoor range, or 4000ft outdoor/line-of-sight range, you can set up a mesh network to talk to or communicate with various devices around your house, work, or other area. This module has the familiar XBee package while...

XBee 3 Pro Module - PCB Antenna
Price: $61.83
View
Availability: Out of Stock
Sparkfun Item #: WRL-15127 -

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft indoor range, or 2mile outdoor/line-of-sight range, you can set up a mesh network to talk to or communicate with various devices around your house, work, or other area. This module has the familiar XBee...

XBee 3 Pro Module - RP-SMA Antenna
Price: $61.83
View
Availability: Out of Stock
Sparkfun Item #: WRL-15131 -

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft indoor range, or 2mile outdoor/line-of-sight range, you can set up a mesh network to talk to or communicate with various devices around your house, work, or other area. This module has the familiar XBee...

XBee 3 Pro Module - U.FL Antenna
Price: $61.83
View
Availability: Out of Stock
Sparkfun Item #: WRL-15129 -

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft indoor range, or 2mile outdoor/line-of-sight range, you can set up a mesh network to talk to or communicate with various devices around your house, work, or other area. This module has the familiar XBee...

XBee Pro 60mW PCB Antenna - Series 1
OOD!
Price: $71.54
View
Availability: Back Order
DFRobot Item #: TEL0063 -

This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.|Specification| 3.3V @ 215mA 250kbps...

XBee PRO 63mW PCB Antenna  -Series 2C (ZigBee Mesh) S2C
OOD!
Price: $72.23
View
Availability: Back Order
DFRobot Item #: TEL0017 -

This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.The XBee/XBee-PRO ZB (S2C) introduces the SPI serial...

XBee Pro 63mW PCB Antenna - Series 2B (ZigBee Mesh)
Sale!
Price: $78.33
View
Availability: Stocked
Sparkfun Item #: WRL-10418 -

"This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Series 2B modules use a different hardware configuration...

Xbee Shield
Price: $13.19
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCS01407S -

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial, port for easier prototyping. Features arduino main board compatible 3 indicator LED?ON/Sleep, RSSI, ASSOC?for XBee Full size with free drills Reset button for XBee and base board Provide maximal 500mA under 3.3V Full break out for XBee Full break out for the base board Package list XBee Shield PCBA...

Xbee Shield for Arduino
OOD!
Price: $18.62
View
Availability: Back Order
DFRobot Item #: DFR0015 -

The Arduino XBee shield is designed to meet wireless sensor networks such as wifi, bluetooth 2.0/4.0 and zigbee. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. This xbee shield for arduino can be directly stack on top of Arduino Uno / Leonardo and Mega. It provides a 5-3.3V voltage converter to allow 3.3V communication modules to interface Arduino 5V system. The compatibility of this arduino xbee shield is now...

Xbee USB adapter (FTDI ready)
OOD!
Price: $32.67
View
Availability: Back Order
DFRobot Item #: DFR0050 -

The upgraded DFRobot Xbee USB adapter is designed for the XBee module configuration parameters to facilitate using or to work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino FIO/pro/mini?lilypad Arduino and so on. It's a must-have for interactive electronic installations and projects.The adapter allows the PC to configure XBee / Bluetooth module and the...

XBee USB Adapter V2 - Atmega8U2
OOD!
Price: $30.86
View
Availability: Back Order
DFRobot Item #: DFR0174 -

The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. It's compatible with all the products using XBee socket. It provides a faster and stable wireless communication for your projects. The DFRobot Xbee USB adapter is used for the XBee module...

XBee WiFi Module - RP-SMA Connector
OOD!
Price: $80.25
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WRL-12569 -

"This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee WiFi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device...

XBee-PRO 900HP S3B RPSMA Antenna
OOD!
Price: $101.79
View
Availability: Back Order
DFRobot Item #: TEL0021 -

Digi International XBee-PRO 900HP RF Modules enjoys proven reputation in wireless devices connectivity. They benefit from the DigiMesh networking protocol, feature dense network operation and support for sleeping routers. and are also available in a proprietary point-to-multipoint configuration. Supporting RF line-of-sight ranges up to 9 miles (with high-gain antennas), and data rates of up to 200Kbps, these modules are ideal for extended-range applications requiring increased data...

XBee-PRO S2C ZigBee Module (U.FL)
OOD!
Price: $72.23
View
Availability: Back Order
DFRobot Item #: TEL0004 -

This is the XBee PS2CTH ZigBee module with U.FL antenna interface. It improves on the transmit power and data protocol which allows you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. The XBee-PRO S2C module has a uniform pin map with other XBee modules, which means you...

XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
OOD!
Price: $34.30
View
Availability: Back Order
DFRobot Item #: DFR0162 -

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet connectivity to your projects. It's great for anything from home automation to robot control. The possibilities are endless! It has 8...

Xcelite 8-in-1 Screwdriver Set
OOD!
Price: $45.92
View
Availability: Back Order
Sparkfun Item #: TOL-14235 -

The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren't currently using. Though the screwdriver set includes eight unique bits, the end of the shaft features a 0.25" hex driver that can fit most of your existing 1/4" bits. With a strong magnetic hold and no-roll handle design, this is one of the best all-in-one tools we have used! The shaft...

Xcelite Ergonomic Screwdriver Set (6pcs)
OOD!
Price: $82.06
View
Availability: Back Order
Sparkfun Item #: TOL-14234 -

The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and handle. Utilizing Xcelite's own Ergonic® handles, each screwdriver in this set conforms to your hand to provide great comfort and reduce torque loss to provide you with a fantastic slip-resistant tool! The set includes two Phillips head and four flathead screwdrivers. The screwdrivers in this set have been equipped with durable, satin-finished chrome molybdenum...

XLR-3 Cable - 25ft
OOD!
Price: $32.78
View
Availability: Back Order
Sparkfun Item #: CAB-15310 -

This is a 25 foot (~7.6m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR...

XSP - Arduino Programmer
OOD!
Price: $26.72
View
Availability: Back Order
DFRobot Item #: DFR0360 -

XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency. With this programmer, you can adjust its interface for your own device. Quite convenient and easy to use. It will be your good friend, when you coding and programming. It could work with eClip programming Fixture together....