Products 289-336 of 3198
Show
Arduino Uno - R3
Price: $49.66
View
Availability: Stocked
Sparkfun Item #: DEV-11021 -

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Never fear for accidental electrical discharge, either since since...

Arduino Uno - R3 SMD
Price: $50.69
View
Availability: Stocked
Sparkfun Item #: DEV-11224 -

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Never fear for accidental electrical discharge, either since since...

Arduino Uno Enclosure - Clear Plastic
OOD!
Price: $13.25
View
Availability: Back Order
Sparkfun Item #: PRT-12838 -

The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these enclosures are actually transparent. The enclosures are perfect for...

Arduino Uno Rev 3
OOD!
Price: $41.20
View
Availability: Back Order
DFRobot Item #: DFR0181 -

This is the new Arduino Uno Rev 3. In addition to all the features of the previous board, the arduino Uno Rev 3 now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The arduino Uno R3 also adds SDA and SCL pins...

Arduino Uno WiFi R2
OOD!
Price: $97.28
View
Availability: Back Order
Sparkfun Item #: DEV-14871 -

Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi and some other enhancements. It incorporates a brand new 8-bit microprocessor from Microchip and has an onboard IMU (Inertial Measurement Unit). The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network,...

Arduino Workshop
Price: $54.17
View
Availability: Out of Stock
Sparkfun Item #: BOK-11932 -

The Arduino is a cheap, flexible, open source microcontroller platform designed to make it easy for hobbyists to use electronics in homemade projects. With an almost unlimited range of input and output add-ons, sensors, indicators, displays, motors, and more, the Arduino offers you countless ways to create devices that interact with the world around you. Arduino Workshop, you'll learn how these add-ons work and how to integrate them into your own projects. You'll start off with an overview of...

Arduino Yun
Price: $156.41
View
Availability: Stocked
Sparkfun Item #: DEV-12053 -

"Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). Arduino Yun is the first member of a new groundbreaking line of WiFi products combining the power...

Arduino Zero to Hero Kit
OOD!
Price: $194.24
View
Availability: Back Order
DFRobot Item #: KIT0133 -

Open-source, plug & play electronics toolkit for learning Arduino platform Online course created by Sanjin Dedi?Welcome to the world of electronics and programming!DFRobot proudly presents the Arduino Zero to Hero E-learning Kit which comes complete with an online course created by a well-known Australian Robotics Engineer and Teacher: Sanjin Dedi?. The online course is perfect for ambitious beginners and intermediate Arduino users trying to take their circuitry and programming to the next...

Argon NEO Raspberry Pi 4 Case
OOD!
Price: $32.50
View
Availability: Back Order
Sparkfun Item #: PRT-17161 -

This is probably one of the best, basic Raspberry Pi 4 cases you'll find. The Argon NEO Raspberry Pi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Raspberry Pi 4 without obstructing access to the I/O ports on board. A plastic base protects any surface you place the enclosure on from scratches. The middle section is an aluminum shield that goes over top the connectors and board itself. it has extrusions that provide passive cooling for the hottest components...

Argon ONE M.2 Raspberry Pi 4 Case
OOD!
Price: $95.01
View
Availability: Back Order
Sparkfun Item #: PRT-17752 -

The Argon ONE M.2 case features all the high-end features of the Argon ONE Raspberry Pi case but with the added feature of an M.2 interface for using M.2 (Key-B or Key-B&M) SATA solid state drives (not included). It also includes some updates over the previous generation of the Argon ONE case including full-sized HDMI ports, power management modes, and built in IR support for using the Pi with remotes. Unfortunately the M.2 SATA support does come at the expense of the USB 3 ports, but offers a...

Argon ONE Raspberry Pi 4 Case
OOD!
Price: $52.00
View
Availability: Back Order
Sparkfun Item #: PRT-17157 -

If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case. In addition to providing passive and active cooling to keep the Pi 4 running cool, it incorporates multiple pieces to allow for access to different levels of the board like a magnetic dedicated door for the 40 pin connector that provides pin numbers and labels. An included fan HAT provides software controllable, active cooling while the aluminum enclosure provides passive...

Argon POLY+ Raspberry Pi 4 Case
OOD!
Price: $11.59
View
Availability: Back Order
Sparkfun Item #: PRT-17162 -

A basic case with some not so basic features. The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way. The case has a two step cover similar to that of the Argon NEO which provides covered protection for the board while leaving the I/O ports accessible and includes a top cover which covers all but leaves room for most HATs and PHATs to sit inside. Also included is a heat sink for the processor and thermal tape to attach it. We...

Argon40 Fan HAT for Raspberry Pi 4, 3B, and 3B+
OOD!
Price: $21.34
View
Availability: Back Order
Sparkfun Item #: DEV-17163 -

The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications. This software controlled fan comes in a typical HAT configuration and plugs right into the 40-pin I/O header on the Raspberry Pi. It will work with the 4, 3B, and 3B+ and fits in all the Argon40 cases we sell (It comes built into the Argon ONE, so no need to buy it if that's the case you're using. For quieter cooling, check out our line of heatsink cases or the Argon...

ARGOS Omnidirectional Antenna - 401MHz
OOD!
Price: $15.06
View
Availability: Back Order
Sparkfun Item #: WRL-17523 -

Designed for transmit and receive at 401MHz, this quarter-wave antenna is the perfect partner for our ARGOS ARTIC R2 satellite communication breakout board. It is made from RG178 coaxial cable and has an effective length of 183mm. It is equipped with an MHF IPEX connector, which is compatible with u.FL. It is lightweight too, weighing in at only 0.4 grams, 0.014 oz. Features: Quarter wave wire antenna (omnidirectional) Frequency: 401MHz Effective length: 183mm Total length: 192mm Material:...

ARGOS Satellite Transceiver Shield - ARTIC R2
OOD!
Price: $333.33
View
Availability: Back Order
Sparkfun Item #: SPX-17236 -

Is your project linked to environmental protection, awareness or study, or to protecting human life? Perhaps you are developing a wildlife tracker, ocean buoy, environmental monitoring system or need to transfer emergency medical information? Do you need to be able to transmit and receive data anywhere? If so, this is the product for you! Our ARGOS Satellite Transceiver Shield allows you to send and receive short bursts of data via the ARGOS satellite network, anywhere on Earth including the...

Artech Digital Multimeter - A5020
OOD!
Price: $36.40
View
Availability: Back Order
Sparkfun Item #: TOL-18341 -

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±10Ω, current/voltage sense, and a Smart Measurement feature. You can use the multimeter to measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, Hz DUTY, and test diodes. With Smart Measurement this multimeter meter will auto identify...

Artech Digital Multimeter - A5030
OOD!
Price: $40.95
View
Availability: Back Order
Sparkfun Item #: TOL-18342 -

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±10Ω, current/voltage sense, and a Smart Measurement feature. You can use the multimeter to measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, EF, Hz DUTY, and test diodes. With Smart Measurement this multimeter will auto identify the...

Artech Smart Digital Multimeter - A875
OOD!
Price: $28.49
View
Availability: Back Order
Sparkfun Item #: TOL-18340 -

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. This Smart Digital Multimeter, however, is not your average multimeter, it features a continuity sound at less than about 40±5Ω, current/voltage sense, and a Smart Measurement feature. You can use the multimeter to measure AC/DC voltage, AC/DC current, resistance, continuity, capacitance, frequency, temperature, NCV, and test diodes. With Smart Measurement this multimeter will automatically identify the...

Artemis Global Tracker
Price: $749.90
View
Availability: Out of Stock
Sparkfun Item #: SPX-16469 -

Could this be the one tracker to rule them all? Incorporating the Artemis Module, Iridium 9603N Short Burst Data modem, u-blox ZOE-M8Q GNSS receiver, and a TE MS8607 PHT sensor, this compact tracker will allow you to do an incredible number of things that used to be very difficult. With a clear view of the sky, the Artemis Global Tracker (AGT) allows you to send and receive short data messages. It works anywhere in the world, including the polar regions, far beyond the reach of WiFi and GSM...

ATmega128RFA1 Development Board
Sale!
Price: $52.50
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: DEV-11197 -

"The ATmega128RFA1 is a portmanteau of sorts – two separate components combined to form one device; half microcontroller, half RF transciever. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontroller and best-in-class 2.4GHz RF transceiver providing industry’s highest RF performance for single-chip devices, with a link budget of 103.5dBm. The ATmega128RFA1 features Wake-on Radio, 32-bit MAC symbol counter, temperature sensor,...

ATmega328 - TQFP
OOD!
Price: $7.08
View
Availability: Back Order
Sparkfun Item #: COM-13448 -

This is Atmel's high performance, low power 8-bit AVR ATMega328 microcontroller in a pint-sized TQFP package. Yes, you really can solder that. Note: There is no difference between this part and its previous version. This new copy was created to help make our in house assemblies easier to produce and manage. Features: 1.8-5.5V operating range Up to 20MHz Part: ATMEGA328P-AU 32kB Flash program memory 1kB EEPROM 2kB Internal SRAM 2 8-bit Timer/Counters 1 16-bit Timer/Counter RTC with separate...

ATmega328 Chip with Arduino Bootloader
OOD!
Price: $9.48
View
Availability: Back Order
DFRobot Item #: DFR0081 -

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Duemilanove board that has all of these built into the...

ATmega328 with Arduino Optiboot (Atmega328)
Price: $6.35
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-AAM328AT -

    This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Atmega328 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.     To get this chip works, you will need an external 16MHz crystal or resonator, and a 5V power supply to create the minimum Arduino system. If you are not comfortable doing this, we recommend you purchasing the Crowduino board...

ATmega328 with Arduino Optiboot (Uno)
Price: $9.94
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: DEV-10524 -

The name says it all on this one. An ATmega328P in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into...

Atomic Clock
Price: $3,990.00
View
Availability: Out of Stock
Sparkfun Item #: SPX-14830 -

The Miniature Atomic Clock (MAC) from Microsemi uses a rubidium laser to output an extremely accurate clock. We're speaking at the edge of our knowledge so please bear with us but the short-term stability (Allan Deviation) is ≤8*10-12. From Wikipedia on Atomic Clocks: For context, a femtosecond (1×10−15 s) is to a second what a second is to about 31.71 million (31.71×106) years and an attosecond (1×10−18 s) is to a second what a second is to about 31.71 billion (31.71×109) years. That puts the...

Attachment Blocks - 12 pack
Price: $17.31
View
Availability: Out of Stock
Sparkfun Item #: ROB-12531 -

These aluminum attachment blocks make it possible to connect two flat panels at a 90° angle. These blocks come in packs of 12 and each offers two 6-32 tapped holes 0.32" deep for your mounting applications. Documents: SketchUp Part Product Page (585400) ...

Atto84 with Arduino Bootloader
OOD!
Price: $12.89
View
Availability: Back Order
Sparkfun Item #: SPX-14804 -

Arduino and Arduino compatible dev boards are an awesome tool for developing an idea quickly but, being development boards, they're often a little more bulky and full featured than you really need. Having a USB interface and a bootloader is so nice, though, so we put together the bare minimum Arduino compatible breakout for integration into your small projects. We call it the Atto84. The Atto84 is essentially a breakout board for the absolutely minute WQFN ATtiny84, but we've done some work to...

AttoPilot Voltage and Current Sense Breakout - 45A
Price: $38.16
View
Availability: Stocked
Sparkfun Item #: SEN-10643 -

"This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider. The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge...

ATX Power Supply Connector - Right Angle
Price: $3.52
View
Availability: Stocked
Sparkfun Item #: PRT-09498 -

This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dimensions. Pair this connector with a standard computer power supply and you can source a number of different voltages (+3.3V, +5V, +12V, -12V, -5V) to your project.[ Documents: Dimensional Drawing ...

ATX Right Angle Connector - PTH 4-pin
OOD!
Price: $1.33
View
Availability: Back Order
Sparkfun Item #: PRT-15700 -

This 4-pin, ATX, right angle connector mates up to the standard 4-pin computer peripheral port often found on ATX power supplies. This connector will also serve as a replacement to that found in the SparkFun ATX Power Connector Breakout Kit. Features: Works with 12V & 5V devices. Documents: Assembly & Hookup Guide Datasheet ...

Audio Cable 2.5mm 8"
Price: $3.51
View
Availability: Back Order
Sparkfun Item #: CAB-10159 -

This is a simple 8" long 2.5mm audio cable. It is terminated with a 2.5mm audio plug on one side and unterminated with bare wires on the other end. These are to be used with the ModKit shields. The 2.5mm plug is the same one used by many devices. A lot of older cell phones used this size for the headsets. It is the audio jack size generally used on a lot of portable electronics that didn't use the traditional 3.5mm headphone jack. Also, the Rebel line of Canon dSLRs use this jack for shutter...

Audio Cable to Alligator Clips - 2.5mm
OOD!
Price: $1.75
View
Availability: Back Order
Sparkfun Item #: CAB-17983 -

This is an Audio to Alligator Cable, an 8in. long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the other. Documents: Datasheet

Audio Cable TRRS - 18" (pigtail)
OOD!
Price: $2.50
View
Availability: Back Order
Sparkfun Item #: CAB-11580 -

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players) If you're hacking on something that has a 4-conductor audio jack, being able to...

Audio Cable TRRS - 1ft
OOD!
Price: $2.50
View
Availability: Back Order
Sparkfun Item #: CAB-14163 -

This is a foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (as in hands-free headsets) or to carry a video signal (as in some...

Audio Jack - 1/4" Stereo (right angle)
OOD!
Price: $1.67
View
Availability: Back Order
Sparkfun Item #: COM-11144 -

This is the kind of 1/4" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whether or not there is something plugged in to the jack. The jack can be panel mounted in an 11mm diameter hole. The jack comes with a plastic washer and nut for panel mounting. Note: Looking for a breakout to hook this audio jack up to your project a little easier? Check out the SparkFun TRS Jack Breakout! Documents: Datasheet (JP-611) ...

Audio Jack - 3.5mm TRRS (SMD)
OOD!
Price: $1.67
View
Availability: Back Order
Sparkfun Item #: PRT-12639 -

This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "tip, ring, ring, sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players). Documents: Dimensional Drawing ...

Audio Jack 3.5mm
Price: $2.66
View
Availability: Stocked
Sparkfun Item #: PRT-08032 -

Low profile 3.5mm stereo audio jack. Documents: Audio 3.5mm Jack Datasheet

Audio Plug - 3.5mm
Price: $0.83
View
Availability: Out of Stock
Sparkfun Item #: COM-11143 -

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder terminals on the inside of the plug. Solder on your wires and crimp the strain relief to make a finished, professional-looking cable.

Audio Shield For DFRduino M0
OOD!
Price: $25.69
View
Availability: Back Order
DFRobot Item #: DFR0420 -

DFRduino M0 Audio Expansion Shield selects the latest full-featured WM8978 of Wolfson as the audio processor. It comes with HI-FI level digital signal processing kernel, supporting 3D surround-sound enhancement and 5 frequency bands balance which can improve the sound quality. With a programmable notch filter, it also can filter noise caused by current noise, etc.Attributing to the plentiful hardware resource on DFRduino M0, we finally can transplant this HI-FI level codec chip to Arduino...

Auto-Digital Thermostat - ADT6401
OOD!
Price: $15.06
View
Availability: Back Order
Sparkfun Item #: SPX-16772 -

Introducing the Auto-Digital Thermostat. The ADT6401 is a trip point temperature switch. Use the SPDT switches to set the temperature trip point and hysteresis settings. This breakout is a great addition for your temperature sensing projects. We do not plan to regularly produce SparkX products so get them while they’re hot! Experimental Product: SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no...

Automotive Jumper 2 Wire Assembly - 18 AWG
Price: $4.17
View
Availability: Out of Stock
Sparkfun Item #: PRT-09923 -

This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it's better for higher current applications. Features: 6" length Documents: Datasheet

Automotive Jumper 2 Wire Assembly - 26 AWG
OOD!
Price: $4.17
View
Availability: Back Order
Sparkfun Item #: DD-14862 -

This is a simple two wire automotive cable. Each assembly has bare wires on both ends with a Molex A and B connector in the middle. With thinner 26 AWG wire, it’s better for applications that would not require the thickness of its 18AWG counterpart. Note: Since this product belongs to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can! We also cannot accept requests/returns/exchanges, provide documentation or provide support on any aspect...

Auxiliary Clip Magnifier for Soldering
Retail: $13.03
Price: $10.01
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TH8875AC -

It is a very useful maintenance tool with magnifier, clip, LED and iron stand. It can play an important role when you weld small SMD components. You can nip the PCB with clip, enlarge it with magnifier and then start to weld. Sometimes, in order to prevent the adjacent pins together when welding the IC with intensive pins, you can use magnifier to enlarge for testing, if the light is weak, you can open the LED.

AVC 2017 Tee - Large
OOD!
Price: $30.33
View
Availability: Back Order
Sparkfun Item #: SWG-14523 -

Were you not able to make it to the Autonomous Vehicle Competition (AVC) at Maker Faire® Denver this year? Or maybe you made it and just weren't able to get to our merch tent? Good news! For everyone who attended or wanted to attend our AVC and Battle Bots competitions, you can still get a shirt that says you were (or wanted to be) there! This large, lightweight red heather T-shirt proudly displays "Auto," the robotic warlord of the AVC track. On the back of this fitted tee is our SparkFun...

AVC 2017 Tee - Medium
OOD!
Price: $30.33
View
Availability: Back Order
Sparkfun Item #: SWG-14522 -

Were you not able to make it to the Autonomous Vehicle Competition (AVC) at Maker Faire® Denver this year? Or maybe you made it and just weren't able to get to our merch tent? Good news! For everyone who attended or wanted to attend our AVC and Battle Bots competitions, you can still get a shirt that says you were (or wanted to be) there! This medium, lightweight red heather T-shirt proudly displays "Auto," the robotic warlord of the AVC track. On the back of this fitted tee is our SparkFun...

AVC 2017 Tee - Small
OOD!
Price: $30.33
View
Availability: Back Order
Sparkfun Item #: SWG-14511 -

Were you not able to make it to the Autonomous Vehicle Competition (AVC) at Maker Faire® Denver this year? Or maybe you made it and just weren't able to get to our merch tent? Good news! For everyone who attended or wanted to attend our AVC and Battle Bots competitions, you can still get a shirt that says you were (or wanted to be) there! This small, lightweight red heather T-shirt proudly displays "Auto," the robotic warlord of the AVC track. On the back of this fitted tee is our SparkFun...

AVC 2017 Tee - XL
Price: $30.33
View
Availability: Out of Stock
Sparkfun Item #: SWG-14524 -

Were you not able to make it to the Autonomous Vehicle Competition (AVC) at Maker Faire® Denver this year? Or maybe you made it and just weren't able to get to our merch tent? Good news! For everyone who attended or wanted to attend our AVC and Battle Bots competitions, you can still get a shirt that says you were (or wanted to be) there! This XL, lightweight red heather T-shirt proudly displays "Auto," the robotic warlord of the AVC track. On the back of this fitted tee is our SparkFun emblem...

AVC 2017 Tee - XXL
Price: $30.33
View
Availability: Out of Stock
Sparkfun Item #: SWG-14519 -

Were you not able to make it to the Autonomous Vehicle Competition (AVC) at Maker Faire® Denver this year? Or maybe you made it and just weren't able to get to our merch tent? Good news! For everyone who attended or wanted to attend our AVC and Battle Bots competitions, you can still get a shirt that says you were (or wanted to be) there! This XXL, lightweight red heather T-shirt proudly displays "Auto," the robotic warlord of the AVC track. On the back of this fitted tee is our SparkFun...