Products 289-336 of 609
Show
Rover 5 Tank Chassis (2 motors)
OOD!
Price: $67.23
View
Availability: Back Order
DFRobot Item #: ROB0055 -

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis&;rsquo;s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. &;ldquo;Stretchy&;rdquo; rubber treads maintain tension as the clearance is raised.Inside of the chassis are 4 noise suppression coils at the bottom and a battery holder that accepts 6x AA batteries (not included). It is recommended to use NiMh batteries as they last longer...

Rover 5 Tank Chassis (4 motors with 4 Encoders)
OOD!
Price: $124.06
View
Availability: Back Order
DFRobot Item #: ROB0055-4M4E -

Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised.Inside of the chassis are 4 noise suppression coils at the bottom and a battery holder that accepts 6x AA batteries (not included). It is recommended to use NiMh batteries as they last longer and...

Rubber Ring - 1.65"ID x 1/8"W
Price: $2.22
View
Availability: Out of Stock
Sparkfun Item #: ROB-12343 -

These lipped Rubber Rings have an inner diameter of 1.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire. Features: ID - 1.65" Width - 1/8"

Rubber Ring - 2.65"ID x 1/8"W
Price: $1.87
View
Availability: Out of Stock
Sparkfun Item #: ROB-12403 -

These lipped Rubber Rings have an inner diameter of 2.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire. Features: ID - 2.65" Width - 1/8"

Rubber Ring - 3.65"ID x 1/8"W
Price: $2.08
View
Availability: Out of Stock
Sparkfun Item #: ROB-12549 -

These lipped Rubber Rings have an inner diameter of 3.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire. Features: ID - 3.65" Width - 1/8"

Rubber Ring - 4.65"ID x 1/8"W
Price: $2.30
View
Availability: Out of Stock
Sparkfun Item #: ROB-12233 -

These lipped Rubber Rings have an inner diameter of 4.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire. Features: ID - 4.65" Width - 1/8"

Rubber Ring - 5.65"ID x 1/4"W
Price: $2.72
View
Availability: Out of Stock
Sparkfun Item #: ROB-12278 -

These lipped Rubber Rings have an inner diameter of 5.65", a width of 1/4", and a sturdy rubber sidewall. These rings can be used as a replacement for Precision Disk Wheels or can wrap around the outside edge of another flat disc to make the ring a simple tire. Features: ID - 5.65" Width - 1/4"

Rubber Wheel (Compatible with Servo &; Motor)
OOD!
Price: $8.10
View
Availability: Back Order
DFRobot Item #: FIT0336 -

This rubber wheel is used in our popular 4WD mobile platforms. It can be mounted directly onto micro gear motors, but also compatible with our most servos.|Specification| Outer Diameter: 80mm(3.15") Wheel Width:30 mm(1.18") Axle Pore Size: 5.8mm(diameter)×3.5mm?thickness? (0.23"x0.14") Axle depth:7.6mm(0.30")|ShippingList| Rubber Wheel(Compatible with Servo&Motor) x2 ...

Screw - Phillip Head (M3 x 12mm, 3 pack)
OOD!
Price: $1.67
View
Availability: Back Order
Sparkfun Item #: PRT-13227 -

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware.

Screw - Phillips Head (1", 4-40, 10 pack)
OOD!
Price: $2.64
View
Availability: Back Order
Sparkfun Item #: PRT-10450 -

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

Screw - Phillips Head (1/2", 4-40, 10 pack)
OOD!
Price: $2.64
View
Availability: Back Order
Sparkfun Item #: PRT-10452 -

Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

Screw - Phillips Head (1/4", 4-40, 10 pack)
OOD!
Price: $2.64
View
Availability: Back Order
Sparkfun Item #: PRT-10453 -

There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

Screw - Phillips Head (3/4", 4-40, 10 pack)
OOD!
Price: $2.64
View
Availability: Back Order
Sparkfun Item #: PRT-10451 -

Standard Philips-head 4-40 screws. They are 3/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

Screw - Phillips Head (3/8", 2-56)
OOD!
Price: $0.35
View
Availability: Back Order
Sparkfun Item #: PRT-08993 -

These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single units.

Servo - Generic (Sub-Micro Size)
Price: $16.16
View
Availability: Stocked
Sparkfun Item #: ROB-09065 -

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 pin power and control cable, and all hardware listed below. Note: This servo is rated for 180° rotation, but in actuality it only hits ~160°. Includes: 1x Micro Size Servo 1x Single Arm Micro Horn 1x...

Servo - Generic Continuous Rotation (Micro Size)
Price: $21.57
View
Availability: Stocked
Sparkfun Item #: ROB-10189 -

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Includes: 1x SM-S3317S Full Rotation Servo 1x Single Arm Horn 1x Double Arm Horn 1x Four Point Horn 4x Rubber Grommets 4x 2x15mm Phillips Screw 4x Brass Eyelets Features: Voltage: 4.8-6.0 Volts Torque:...

Servo - Generic High Torque (Standard Size)
Price: $23.38
View
Availability: Stocked
Sparkfun Item #: ROB-11965 -

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60° This is a tough little servo with a standard 3 pin power and control cable, and all hardware listed below. Replaces:ROB-9064 Includes: 1x FS5106B High Torque Servo 1x Double Arm Horn 1x Circle Horn 1x Four Point Horn 1x Six Point Horn 2x 3x10mm Phillips Screw 4x 2x13mm Mounting Phillips Screw 4x Rubber Grommets 4x Brass...

Servo - Generic High Torque Continuous Rotation (Standard Size)
Price: $25.19
View
Availability: Stocked
Sparkfun Item #: ROB-09347 -

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included. Includes: 1x SM-S4303R High Torque Continuous Rotation Servo 1x Mounting Screw 1x Four Point Horn 1x Six Point Horn 2x Double Arm Horn (1x Large, 1x Medium) 2x Circle Horn (1x Large, 1x Medium) 4x Rubber...

Servo - Generic Metal Gear (Micro Size)
OOD!
Price: $21.99
View
Availability: Back Order
Sparkfun Item #: ROB-14760 -

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and all hardware listed below. Features: Voltage: 4.8-6.0 Volts Torque: 38.8/44.4 oz-in. (4.8/6.0V) Speed: 0.20/0.18 sec/60° (4.8/6.0V) Rotation: 160° Dual Ball Bearing Metal Gears* 28.8 x 13.8 x...

Servo - Hitec HS-422 (Standard Size)
Price: $42.77
View
Availability: Stocked
Sparkfun Item #: ROB-11884 -

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-422 servo comes standard with a 3-pin power and control cable and all hardware listed below. Includes: 1x HS-422 Servo 1x Circle Horn 1x Double Arm Horn 1x...

Servo - Hitec HS-425BB (Standard Size)
OOD!
Price: $47.92
View
Availability: Back Order
Sparkfun Item #: ROB-11883 -

This is the versatile Hitec HS-425BB servo. This little guy is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16sec/60°, this is a great servo even if you are on a budget! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-425BB servo comes standard with a 3-pin power and control cable and all hardware listed below. Includes: 1x HS-425BB Servo 1x Circle Horn 1x Double Arm Horn 1x Single...

Servo - Hitec HS-625MG (Standard Size)
Price: $73.08
View
Availability: Out of Stock
Sparkfun Item #: ROB-11885 -

This powerful motor is the Hitec HS-625MG servo. This is one of the strongest metal gear servos that is available and at a great price. The HS-625MG is able to take in 6 volts and deliver 94 oz-in. of maximum torque at 0.15sec/60°, and those are numbers you can rely on! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-625MG servo comes standard with a 3-pin gold plated power and control cable and all...

Servo - Hitec HS-646WP (Standard Size)
Price: $98.24
View
Availability: Out of Stock
Sparkfun Item #: ROB-11886 -

This unique motor is the Hitec HS-646WP servo. What separates this servo from the rest is that it is waterproof with a IP67 (Ingress Protection-67) rating! The HS-646WP is able to take in an impressive 7.4 volts and deliver 161.1 oz-in. of maximum torque at 0.17 sec/60°, and those are numbers you can rely on! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-646WP servo comes standard with a 3-pin gold...

Servo - Hitec HS-755HB (1/4 Scale)
Price: $90.17
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: ROB-12625 -

This powerhouse is the Hitec HS-755HB servo. Able to take in 6 volts and deliver an impressive 183 oz-in. of maximum torque at 0.23 sec/60°, this is a tough 1/4 scale servo and it won;t let you down when you need it! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-755HB servo comes standard with a 3-pin gold plated power and control cable and all hardware listed below. Includes: 1x HS-755HB Servo 1x...

Servo - Hitec HS-805BB (Giant Scale)
Price: $91.38
View
Availability: Out of Stock
Sparkfun Item #: ROB-11881 -

This beast is the Hitec HS-805BB servo. Able to take in 6 volts and deliver an impressive 343 oz-in. of maximum torque at 0.14 sec/60°, this is a heavy duty servo and is not to be taken lightly! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-805BB servo comes standard with a 3-pin power and control cable, Y-harness, and all hardware listed below. Note: This servo can draw around 800mA, so keep that in...

Servo - Hitec HS-85MG (Micro Size)
Price: $68.51
View
Availability: Out of Stock
Sparkfun Item #: ROB-11887 -

This is the epitome of the phrase "appearances can be deceiving," and trust us, with the Hitec HS-85MG that couldn't be more true. The HS-85MG is able to take in 6 volts and deliver 49 oz-in. of maximum torque at 0.14sec/60°, and this guy is only about the size of a bottle cap! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-85MG servo comes standard with a 3-pin power and control cable and all hardware...

Servo Arm - Double (Hitec Standard Spline)
Price: $11.44
View
Availability: Out of Stock
Sparkfun Item #: ROB-12546 -

These aluminum double servo arms have a length of 2.685”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 Hitec servo spline. If you need a sturdy arm for your project these are your ideal choice. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range...

Servo Arm - Single (Hitec Standard Spline)
Price: $10.56
View
Availability: Out of Stock
Sparkfun Item #: ROB-12388 -

These aluminum single servo arms have a length of 1.53”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 Hitec servo spline. If you need a sturdy arm for your project these are your ideal choice. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Expansion Board for Onion Omega
OOD!
Price: $29.74
View
Availability: Back Order
Sparkfun Item #: DEV-14445 -

The Servo Expansion Board adds 16 PWM (Pulse Width Modulation) outputs to your Omega. With this expansion, you will be able to get started with your project quickly by connecting standard servos directly to the onboard 3-pin connectors. You can use this little board for anything with moving parts, such as robotics or driving DC motors. You can also make a light show with LEDs by controlling their brightness! Each Servo Expansion Board has a built-in oscillator that is used to generate PWM...

Servo Extension - CAT6 (boosted)
Price: $23.77
View
Availability: Out of Stock
Sparkfun Item #: ROB-12272 -

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable before being converted back into servo pin-outs on another extension board (sold separately). The boosted servo extension boards come equipped with a 14504BG chip which allows CAT6 communication of up to 100ft, and utilizes the 1.5” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts,...

Servo Extension - CAT6 (non-boosted)
Price: $14.62
View
Availability: Out of Stock
Sparkfun Item #: ROB-12176 -

This “non-boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable before being converted back into servo pin-outs on another extension board (sold separately). This non-boosted servo extension board simply allows you to use a CAT6 cable to transmit your servo signals and power. It is limited to around 8 feet. If you want to transmit longer distances, couple it with a boosted adapter (check below). Actobotics is...

Servo Extension Cable - Female to Male (Shrouded)
OOD!
Price: $5.28
View
Availability: Back Order
Sparkfun Item #: ROB-15808 -

This is a 12 inch servo extension cable that comes in handy when your servo is further away from the controller than the wire on the servo allows. The male connector on one end goes to controller, while the female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable. Documents: Datasheet ...

Servo Gear - Futaba (16T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12440 -

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and utilize the 3F Futaba servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Gear - Futaba (20T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12184 -

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a gear pitch of 32P, an outer diameter of 0.688”, and utilize the 3F Futaba servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Gear - Hitec (12T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12258 -

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a gear pitch of 32P, an outer diameter of 0.438”, and utilize the C1 Hitec servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Gear - Hitec (16T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12389 -

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a gear pitch of 32P, an outer diameter of 0.563”, and utilize the C1 Hitec servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Gear - Hitec (24T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12341 -

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 24 teeth with a gear pitch of 32P, an outer diameter of 0.813”, and utilize the C1 Hitec servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Gear - Hitec (32T; Metal)
Price: $27.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12231 -

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 32 teeth with a gear pitch of 32P, an outer diameter of 1.063”, and utilize the C1 Hitec servo spline. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of...

Servo Hub - Lightweight (Futaba Standard)
Price: $8.42
View
Availability: Out of Stock
Sparkfun Item #: ROB-12291 -

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.17”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide...

Servo Hub - Lightweight (Hitec Standard)
Price: $8.42
View
Availability: Out of Stock
Sparkfun Item #: ROB-12543 -

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.17”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range...

Servo Hub - Standard (Futaba Standard)
Price: $10.53
View
Availability: Out of Stock
Sparkfun Item #: ROB-12274 -

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.25”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components...

Servo Hub - Standard (Hitec Standard)
Price: $10.53
View
Availability: Out of Stock
Sparkfun Item #: ROB-12443 -

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.25”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components...

Servo Hub - Tall (Futaba Standard)
Price: $18.28
View
Availability: Out of Stock
Sparkfun Item #: ROB-12480 -

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your 3F Futaba servo spline. These aluminum servo hubs have a length of 1”, a hub diameter of 1”, a shaft diameter of 0.5”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide...

Servo Hub - Tall (Hitec Standard)
Price: $18.28
View
Availability: Out of Stock
Sparkfun Item #: ROB-12227 -

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a length of 1”, a hub diameter of 1”, a shaft diameter of 0.5”, and utilize the 0.77” hub pattern. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide...

Servo Mount - Servo Plate A
Price: $10.53
View
Availability: Out of Stock
Sparkfun Item #: ROB-12330 -

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your servo, and numerous other holes for attachment. The plate utilizes both the 0.77" and 1.5" hole patterns for Actobotics and has 2 0.5" holes for mounting bearings or shafts. For attaching your servo, we recommend 6-32 1/4" screws (not included). Actobotics is a robotics building system based around extruded aluminum channels, gears, precision...

Servo Mount - Servo Plate A (1/4 scale)
Price: $10.96
View
Availability: Out of Stock
Sparkfun Item #: ROB-12200 -

This servo plate provides a mounting ring for your 1/4-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the plate provide convenient attachment points. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex...

Servo Mount - Servo Plate B
Price: $12.79
View
Availability: Out of Stock
Sparkfun Item #: ROB-12444 -

This servo plate allows you to mount your standard-sized servo inside Actobotics channels. The bracket has 4 6-32 tapped holes for attaching your servo and several additional tapped holes for connecting it to a channel, either on the end, or the inside. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together....

Servo Mount - Servo Plate C
Price: $10.96
View
Availability: Out of Stock
Sparkfun Item #: ROB-12237 -

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your servo, and numerous other holes for attachment. The plate utilizes both the 0.77" and 1.5" hole patterns for Actobotics and has a 0.5" hole for mounting bearings or shafts. For attaching your servo, we recommend 6-32 1/4" screws (not included). Actobotics is a robotics building system based around extruded aluminum channels, gears, precision...