Products 253-288 of 2253
Show

Board to Board Double Slot Female Connector - 50 pin, 0.5mm

Availability: Back Order
Item #: PRT-16890 -
Price: $2.84 inc GST
Sparkfun

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being...

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the topside of the board. These connectors are sold in single units. Four of these connectors are needed for the topside of an Alchitry Board. Documents: Dimensional Drawing Alchitry Elements Eagle Library ...

Board to Board Double Slot Male Connector - 50 pin, 0.5mm

Availability: Back Order
Item #: PRT-16891 -
Price: $3.35 inc GST
Sparkfun

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being...

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the underside of the board. These connectors are sold in single units. Four of these connectors are needed for the underside of an Alchitry Board. Documents: Dimensional Drawing Alchitry Elements Eagle Library ...

Bourns Absolute Encoder (EAW0J-B24-AE0128L)

Availability: Back Order
Item #: COM-15036 -
Price: $13.67 inc GST
Sparkfun

The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses....

The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good alternative to using a potentiometer and analog pin, as this allows for full-turn and multi-turn operation. It differs from the more common incremental rotary encoder which has only two or four values in a rotation and is designed to measure full rotations and direction. This...

Brass Sponge

Availability: Stocked
Item #: TOL-08964 -
Price: $4.93 inc GST
Sparkfun

This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your...

This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings and requires no water. Works well as a replacement brass sponge for the Brass Sponge Base sold below.

Breadboard - Classic

Availability: Stocked
Item #: PRT-00112 -
Price: $17.96 inc GST
Sparkfun

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration? This is your standard solderless breadboard - three binding posts, two power buses,...

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration? This is your standard solderless breadboard - three binding posts, two power buses, black aluminum plate backing. It works with a wide variety of wire gauges (29-20 AWG). Check out our Unregulated Power Supply Tutorial! Note: The power rails are unbroken on both sides. Features: Board: 165x56x8.5 mm Aluminum Plate: 183x95x1.5 mm ...

Breadboard - Full-Size (Bare)

Availability: Stocked
Item #: PRT-12615 -
Price: $9.78 inc GST
Sparkfun

Description: This is your tried and true full size solderless breadboard! It has 2 split power buses, 10 columns, and 63 rows - with a total of 830 tie in points. All pins are spaced by a standard...

Description: This is your tried and true full size solderless breadboard! It has 2 split power buses, 10 columns, and 63 rows - with a total of 830 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 20-29AWG. This board also has a self-adhesive on the back. The boards also have interlocking parts, so you can hook as many together as you'd like....

Breadboard - Giant

Availability: Stocked
Item #: PRT-12614 -
Price: $33.27 inc GST
Sparkfun

Description: This is one giant solderless breadboard! It has 7 power buses, 40 columns, and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five...

Description: This is one giant solderless breadboard! It has 7 power buses, 40 columns, and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 20-29AWG. This board also has 4 binding posts, a black aluminum plate backing, and 4 rubber standoffs to keep your breadboard suspended safely on your workstation....

Breadboard - Mini Modular (Black)

Availability: Stocked
Item #: PRT-12047 -
Price: $7.13 inc GST
Sparkfun

This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP...

This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board. It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down. Note: These will not connect securely with...

Breadboard - Mini Modular (Blue)

Availability: Stocked
Item #: PRT-12045 -
Price: $7.13 inc GST
Sparkfun

This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP...

This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board. It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down. Note: These will not connect securely with...

Breadboard - Mini Modular (Green)

Availability: Stocked
Item #: PRT-12046 -
Price: $7.13 inc GST
Sparkfun

This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP...

This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board. It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down. Note: These will not connect securely with...

Breadboard - Mini Modular (Red)

Availability: Stocked
Item #: PRT-12044 -
Price: $7.13 inc GST
Sparkfun

This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP...

This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board. It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down. Note: These will not connect securely with...

Breadboard - Mini Modular (White)

Availability: Stocked-NoBackOrder
Item #: PRT-12043 -
Price: $7.13 inc GST
Sparkfun

This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP...

This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be snapped together to form larger stretches of board. It has a peel and stick adhesive backing as well as two mounting holes for M2 screws so you can anchor it down. Note: These will not connect securely with...

Breadboard - Self-Adhesive (White)

Availability: Stocked
Item #: PRT-12002 -
Price: $8.85 inc GST
Sparkfun

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five...

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG. This board also has a self-adhesive on the back. The boards also have interlocking parts, so you can hook as many together as you'd like. Dimensions: 3.29 x 2.15 x...

Breadboard - Translucent Self-Adhesive (Clear)

Availability: Stocked
Item #: PRT-09567 -
Price: $8.94 inc GST
Sparkfun

Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten. Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power...

Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten. Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five rows are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG. This board also has a self-adhesive on the...

Breadboard - Translucent Self-Adhesive (Red)

Availability: Back Order
Item #: PRT-11317 -
Price: $8.51 inc GST
Sparkfun

Description: How could anyone improve on the clear plastic breadboard. I mean, that's pretty sweet right? What if it was red? This translucent red breadboard is probably the coolest looking regular,...

Description: How could anyone improve on the clear plastic breadboard. I mean, that's pretty sweet right? What if it was red? This translucent red breadboard is probably the coolest looking regular, solderless breadboard there is. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five rows are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of...

Breadboard to GHR-04V Cable - 4-Pin x 1.25mm Pitch

Availability: Back Order
Item #: CAB-17240 -
Price: $3.35 inc GST
Sparkfun

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included with the RTK Surveyor product line, but the GHR...

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included with the RTK Surveyor product line, but the GHR connector is common and may also be seen on other products and sensors. Documents: GHR Connector Datasheet

Breadboard to GHR-05V Cable - 5-Pin x 1.25mm Pitch

Availability: Back Order
Item #: CAB-18078 -
Price: $2.06 inc GST
Sparkfun

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while...

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-05V JST is typically used in PDP, LCD, or small electronics equipment. Features: 28 AWG Documents: Datasheet ...

Breadboard to GHR-05V Cable - 5-Pin x 1.25mm Pitch (Single Connector)

Availability: Back Order
Item #: DD-18616 -
Price: $2.06 inc GST
Sparkfun

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while...

This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins. The five male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-05V JST is typically used in PDP, LCD, or small electronics equipment. Note: Since these cables belong to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can! We also cannot accept requests/returns/exchanges, provide documentation, or...

Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch

Availability: Back Order
Item #: CAB-18079 -
Price: $2.45 inc GST
Sparkfun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while...

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is typically used in PDP, LCD, or small electronics equipment. Features: 28 AWG Documents: Datasheet ...

Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch (Single Connector)

Availability: Back Order
Item #: DD-18639 -
Price: $2.45 inc GST
Sparkfun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while...

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is typically used in PDP, LCD, or small electronics equipment. Note: Since these cables belong to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can! We also cannot accept requests/returns/exchanges, provide documentation, or...

Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch

Availability: Back Order
Item #: CAB-18080 -
Price: $1.81 inc GST
Sparkfun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the...

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse conditions. Features: 28 AWG Documents: Datasheet ...

Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch (Single Connector)

Availability: Back Order
Item #: DD-18638 -
Price: $2.06 inc GST
Sparkfun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the...

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse conditions. Note: Since these cables belong to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can! We also cannot accept requests/returns/exchanges,...

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch

Availability: Back Order
Item #: CAB-18081 -
Price: $2.58 inc GST
Sparkfun

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the...

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse conditions. Features: 28 AWG Documents: Datasheet ...

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch (Single Connector)

Availability: Back Order
Item #: DD-18640 -
Price: $2.58 inc GST
Sparkfun

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the...

This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a secure locking device to ensure connector-mating integrity even under adverse conditions. Note: Since these cables belong to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can! We also cannot accept requests/returns/exchanges,...

Break Away Female Headers - Swiss Machine Pin

Availability: Stocked
Item #: PRT-00743 -
Price: $7.13 inc GST
Sparkfun

Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a...

Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in the Olimex development boards. They mate very well with break away headers. Features: Receptacle Style: Machine (Round) Number of Pins: 30 Pin Spacing: 0.1" (2.54 mm) Receptacle Depth: 3 mm Documents: 30-Pin Swiss Female Headers ...

Break Away Headers - 40-pin Male (Long Centered, PTH, 0.1")

Availability: Stocked
Item #: PRT-12693 -
Price: $1.67 inc GST
Sparkfun

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be...

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers. Documents: Dimensional Drawing

Break Away Headers - Long

Availability: Stocked
Item #: PRT-10158 -
Price: $5.32 inc GST
Sparkfun

These are a longer version of our standard break away headers. They are 20mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs....

These are a longer version of our standard break away headers. They are 20mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. You will get a row of 40 pins. They can be broken or snipped to length. Features: Pin Style: Square Pins Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 20 mm Documents: Dimensional Drawing ...

Break Away Headers - Right Angle 2x40

Availability: Back Order
Item #: COM-12792 -
Price: $3.35 inc GST
Sparkfun

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don't worry, it's easy enough to break it where you need!...

This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don't worry, it's easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other. Documents: Datasheet

Break Away Headers - Right Angle 3x40

Availability: Back Order
Item #: COM-10095 -
Price: $8.51 inc GST
Sparkfun

Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said, if you need a big header like...

Here we have some right-angle headers with 40x3 pins. They are break away and will take a bit of effort to break this beast where you need it to break. That being said, if you need a big header like this, it's easy enough to break it where you need. The pins are spaced at 0.1" and there are 3 rows of 40 pins. These work well in the UAV boards listed below.

Break Away Headers - Straight

Availability: Stocked
Item #: PRT-00116 -
Price: $2.46 inc GST
Sparkfun

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin...

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Features: Pin Style: Square Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 11.5 mm

Break Away Male Headers - Right Angle

Availability: Back Order
Item #: PRT-00553 -
Price: $3.35 inc GST
Sparkfun

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Features: Pin Style: Square Pins Number of Pins: 40 Pin...

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Features: Pin Style: Square Pins Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) Pin Length: 10.25 x 4.5 mm

Breakout Board for Micro: bit

Availability: Stocked-NoBackOrder
Item #: EL-DTS02078B -
Price: $13.03 inc GST
Elecrow

This is a GPIO expansion board for Micro: bit. It completely compatible with the Micro: bit and respectively extended the UART port and IIC port. It can make it easy for you to use the extenal pins...

This is a GPIO expansion board for Micro: bit. It completely compatible with the Micro: bit and respectively extended the UART port and IIC port. It can make it easy for you to use the extenal pins of the Micro: bit. Specifications IIC and UART port. 3 x 20 GPIO pins. Size: 65mm x 33mm Package list Elecrow breakout board for Micro: bit x 1 Wiki & External links User manual (wiki link) ...

Breakout Board for SC16IS750 I2C-SPI-to-UART IC

Availability: Stocked-NoBackOrder
Item #: BOB-09981 -
Price: $17.97 inc GST
Sparkfun

Breakout Board for SC16IS750 I2C/SPI-to-UART IC Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel,...

Breakout Board for SC16IS750 I2C/SPI-to-UART IC Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on our WiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows for greater communication speeds and frees up the Arduino's UART for...

Breakout Board for XBee Module

Availability: Stocked
Item #: BOB-08276 -
Price: $5.32 inc GST
Sparkfun

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is...

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (you'll need 2!) and 0.1" headers below. Documents: Schematic Eagle Files 5V...

Bridge Filament 3mm - 0.45kg (Clear)

Availability: Stocked-NoBackOrder
Item #: TOL-13937 -
Price: $40.51 inc GST
Sparkfun

This is a 0.45kg (1lb) reel of 3mm "clear" Bridge nylon co-polymer filament for 3D printing. Taulman's "Bridge" high-strength nylon co-polymer bridges the strength of nylon 645 and the ease of...

This is a 0.45kg (1lb) reel of 3mm "clear" Bridge nylon co-polymer filament for 3D printing. Taulman's "Bridge" high-strength nylon co-polymer bridges the strength of nylon 645 and the ease of printing of ABS/PLA. Items printed in Bridge nylon filament are stronger and more resilient than parts printed in more common materials. Since Bridge prints cleanly and easily, you can print complex models that are ready to be used. The combination of strength, reduced shrinkage and ease in printing...

British Telecom Connector - BTA (female)

Availability: Back Order
Item #: PRT-12753 -
Price: $3.35 inc GST
Sparkfun

These analog (RH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them for Vernier sensors. These 6-pin connectors are very...

These analog (RH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them for Vernier sensors. These 6-pin connectors are very similar to the RJ11s we use here in North America except instead of a bottom-mounted hook lock, the BTA uses a side-mounted lock. These BTA connectors are perfect for educators or other users who need to set up a Custom Vernier analog sensor which produces a voltage that changes from high to low or...