Products 97-120 of 547
Show
Adhesion Sheet Assembly - S5
Price: $74.33
View
Availability: Stocked
Item #: UM-210702 -

Thanks to the Adhesion sheets for the Ultimaker S5, your prints will adhere to the build plate better, producing consistent high-quality results. A box of Adhesion sheets contains 25 sheets.Underneath is a guideline on how to apply these Adhesion sheets correctly, to prevent air bubbles and to ensure a smoother, flatter surface.Applying the adhesion sheetTo apply the adhesion sheet to your glass plate, you have to follow these steps.1. Remove the build plate from your printer by opening the...

Ultimaker S5 Glass Build Plate
Price: $57.29
View
Availability: Stocked
Item #: UM-206717 -

Replacement glass build plate for Ultimaker S5Size: 35.7cm x 27.8cmSuitable for Ultimaker S5 Only

UM2+ Maintenance Kit (upgraded)
Price: $373.39
View
Availability: Stocked
Item #: UM-9518 -

UM2+ Maintenance Kit (upgraded) For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Velcro
Price: $1.58
View
Availability: Stocked
Item #: UM-1010 -

Velcro For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Y-linear Shaft
Price: $19.76
View
Availability: Stocked
Item #: UM-1011 -

Y-linear Shaft For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Trapezoidal Lead Nut
Price: $19.76
View
Availability: Stocked
Item #: UM-1014 -

Trapezoidal Lead Nut For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Lineair Bearing LM12LUU
Price: $8.89
View
Availability: Stocked
Item #: UM-1015 -

Lineair Bearing LM12LUU For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Feeder Quick Fit Coupling
Price: $15.80
View
Availability: Stocked
Item #: UM-1016 -

Feeder Quick Fit Coupling For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Feeder Motor
Price: $44.45
View
Availability: Stocked
Item #: UM-1017 -

Feeder Motor For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ball Bearing 688-2RS
Price: $1.98
View
Availability: Stocked
Item #: UM-1021 -

Ball Bearing 688-2RS For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Limit Switch Black Long Wire
Price: $6.42
View
Availability: Stocked
Item #: UM-1023 -

Limit Switch Black Long Wire For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Limit Switch Blue Wire
Price: $6.42
View
Availability: Stocked
Item #: UM-1025 -

Limit Switch Blue Wire For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Limit Switch Red Wire
Price: $6.42
View
Availability: Stocked
Item #: UM-1026 -

Limit Switch Red Wire For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ultimaker Print Core AA (0.4)
Price: $212.75
View
Availability: Stocked
Item #: UM-9529 -

Ultimaker 3 print core Professional 3D printing just got more accessible. Maximize the print performance and machine uptime with our swappable, material-matching print cores. Make the most out of reliable build and support material combinations for geometric freedom or print in dual color.Printcore FeaturesMaterial-matching. Get consistent, high-quality 3D printing results with customized nozzle geometry per material, whether it's an engineering build material or soluble support.Quick-to-...

Adhesion sheets
Price: $39.51
View
Availability: Back Order
Item #: UM-2197 -

Using an adhesion sheet is one of the most effective methods of ensuring your 3D print adheres to the build plate, producing consistent high-quality results. Learn how to apply it correctly, prevent air bubbles, and ensure a smoother, flatter surface.One box contains 25 sheets.Install Instructions can be found herehttps://ultimaker.com/en/resources/49882-how-to-use-adhesion-sheets

Upgrade Kit
Price: $816.71
View
(1)
Availability: Back Order
Item #: UM-9510 -

UM2 / UM2 Extended upgrade kitThe new Extrusion upgrade kit lets you turn your Ultimaker 2 into an Ultimaker 2+ in under an hour. Once done, you'll have the very latest 3D printing technology at your fingertips. There' a geared feeder for increased reliability. Swappable nozzles for greater control. And an optimized airflow for smoother prints. It all adds up to make your Ultimaker even smoother, faster and more accurate.This extrusion upgrade kit turns the Ultimaker 2 into an Ultimaker 2+.The...

UM2 Hot End Pack
Price: $137.30
View
Availability: Stocked-NoBackOrder
Item #: UM-1552 -

This is the Ultimaker 2 hot end bundle. This bundle is ONLY compatible for the Ultimaker 2 and contains:The integrated nozzle + heater blockGlass filled PTFE couplerHot end isolatorSpring + Set screwPT100PTFE Coupler ring**For Ultimaker 2/Go/Extended; not compatible with Ultimaker Original/+, nor with the Ultimaker 2+ and 2 Extended+.**

UM2 Feeder Pack
Price: $58.28
View
Availability: Stocked
Item #: UM-1691 -

The feeder pack contains parts for the Ultimaker 2 feeder located at the back of the Ultimaker where the filament is driven.The pack contains:Black plastic shell which all parts sit withinWhite tensioner plastic partsKnurled filament grip (metal)Grub screw for knurled gripperSpringBearing for filament to press againstMetal protection collar where filament enters the plastic shellThis is only for the Ultimaker 2 and Ultimaker 2 Extended. ...

UM2 Fan Pack
Price: $58.28
View
Availability: Stocked
Item #: UM-1699 -

Cooling fan pack for the Ultimaker 2 and Ultimaker Extended only.It contains:2 x large fans1 x small fanThe large fans are placed either side of the extruder to cool the molten filament as it exits.The small fan is placed next to the motherboard.

End Stop Pack
Price: $18.77
View
Availability: Stocked
Item #: UM-1698 -

This is the End Stop Pack for the Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+ and Ultimaker 2+ Extended only.It contains:1X X-Axis end stop1X Y-Axis end stop1X Z-Axis end stopThe end stops are attached at the start of each axis and allow the printer to automatically calibrate itself every time it initiates a print or axis movement.

UM2 Heated Bed Pack
Price: $493.90
View
Availability: Stocked
Item #: UM-1694 -

UM2 Heated Bed Pack For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Heater Cartridge 24V 25W
Price: $69.15
View
Availability: Stocked
Item #: UM-1268 -

Official Ultimaker Spare Part for the Ultimaker 2 and 2 Extended only. This 24V, 25W cartridge fits into the integrated nozzle/block on the print head.This will work on the UM2 Go, but has a longer cable than is normally used.

ESD wrist band (25pcs)
Price: $185.21
View
Availability: Back Order
Item #: UM-2200 -

ESD wrist band (25pcs) For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ultimaker Print Core AA (0.8)
Price: $212.75
View
Availability: Stocked
Item #: UM-9531 -

Professional 3D printing just got more accessible. Maximize the print performance and machine uptime with Ultimaker swappable, material-matching print cores. Make the most out of reliable build and support material combinations for geometric freedom or print in dual color.Delivering industrial-grade resultsMaterial-matching. Get consistent, high-quality 3D printing results with customized nozzle geometry per material, whether it's an engineering build material or water-soluble...