Products 253-288 of 353
Show

Ultimaker ABS Blue 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1624 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Gray 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1630 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Green 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1627 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Orange 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1628 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Pearl Gold 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1626 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Red 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1623 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Silver 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1625 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS White 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1622 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Yellow 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1629 -
Price: $73.34 inc GST
Ultimaker

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and...

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker Black PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-227282 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Blue PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-227333 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Breakaway Material 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-200551 -
Price: $114.94 inc GST
Ultimaker

Ultimaker Breakaway material Ultimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth...

Ultimaker Breakaway material Ultimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on your 3D print. Designed for a hassle-free 3D printing experience, Breakaway provides good adhesion to ABS, PLA, Nylon, CPE, or CPE+. Technical and safety data sheets can be found here. Reasons to choose Ultimaker Breakaway No sanding or waiting for your support material to dissolve. Simply...

Ultimaker Cleaning Filament - 2.85mm (3.0mm Compatible)

Availability: Stocked
Item #: UM-2297 -
Price: $29.18 inc GST
Ultimaker

Using the Ultimaker 3 cleaning filament is the most effective way to unclog and keep print cores in optimal condition.When to use the Ultimaker 3 cleaning filamentThe Ultimaker 3 cleaning filament...

Using the Ultimaker 3 cleaning filament is the most effective way to unclog and keep print cores in optimal condition.When to use the Ultimaker 3 cleaning filamentThe Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes.How to use the Ultimaker 3 cleaning filamentThis filament can be...

Ultimaker CPE Black 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1631 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Blue 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1636 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Dark Gray 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1634 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Green 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1638 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Light Gray 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-1633 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Red 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1635 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Transparent 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1639 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE White 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1632 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Yellow 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1637 -
Price: $88.55 inc GST
Ultimaker

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and...

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE+ TR Black 700g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1644 -
Price: $114.94 inc GST
Ultimaker

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE...

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is...

Ultimaker CPE+ TR Transparent 700g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1643 -
Price: $114.94 inc GST
Ultimaker

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE...

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is...

Ultimaker CPE+ TR White 700g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1645 -
Price: $114.94 inc GST
Ultimaker

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE...

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is available in...

Ultimaker Flourescent Yellow PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-227342 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Green PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-227330 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Grey PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-227329 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Material Station

Availability: Stocked
Item #: UltimakerMaterial -
Price: $5,405.00 inc GST
Ultimaker

Material Station Seamlessly integrating with the Ultimaker S5, the Material Station redefines filament storage and delivery, unlocking truly 24/7 dual extrusion. Inside the humidity-controlled...

Material Station Seamlessly integrating with the Ultimaker S5, the Material Station redefines filament storage and delivery, unlocking truly 24/7 dual extrusion. Inside the humidity-controlled chamber, six material spools can be loaded in any order with up to 4.5 kg of material. Each bay features automatic material switching, composite-ready feeder wheels, and filament flow sensors. Now you can achieve increased productivity, easier operation, and higher-quality production. Simplify your 3D...

Ultimaker Orange PETG Filament- 2.85mm (3.0mm Compatible)

Availability: Out of Stock
Item #: UM-227343 -
Price: $74.75 inc GST
Ultimaker

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish...

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker PA Black 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1646 -
Price: $114.94 inc GST
Ultimaker

Abrasion resistant and Durable Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and...

Abrasion resistant and Durable Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability to withstand significant mechanical stress makes it a great choice for 3D printing tools, functional prototypes, and end-use parts. From toys to aerospace components, Nylon is embraced by engineers and manufacturers worldwide for an array of applications that require...

Ultimaker PA Transparent 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1647 -
review-star review-star review-star review-star review-star
(1)
Price: $114.94 inc GST
Ultimaker

Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability...

Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability to withstand significant mechanical stress makes it a great choice for 3D printing tools, functional prototypes, and end-use parts. Reasons to choose Ultimaker NylonIndustrial-grade impact and abrasion resistanceDurableHigh strength-to-weight ratioLow friction coefficientGood corrosion resistance to...

Ultimaker PCA Black 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1641 -
Price: $114.94 inc GST
Ultimaker

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for...

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing.Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments.High...

Ultimaker PCA Transparent 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1640 -
Price: $114.94 inc GST
Ultimaker

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for...

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing. Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments. High...

Ultimaker PCA White 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1642 -
Price: $114.94 inc GST
Ultimaker

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for...

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing. Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments. High...

Ultimaker PLA Black 750g Spool - 2.85mm (3.0mm Compatible)

Availability: Stocked-NoBackOrder
Item #: UM-1609 -
Price: $70.15 inc GST
Ultimaker

Easy-to-Use, Remarkable Quality, & Good to Mother Earth Ultimaker PLA (polylactic acid) filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Our...

Easy-to-Use, Remarkable Quality, & Good to Mother Earth Ultimaker PLA (polylactic acid) filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Our PLA is made from organic and renewable sources, and because it's plant-based, non-toxic and biodegradable.it's safe, easy to print with and it serves a wide range of applications for both novice and advanced users.Reasons to choose Ultimaker PLAPLA is the preferred choice for primary and secondary...