Products 1-20 of 20
Show
Binho Nova Multi-Protocol USB Host Adapter
OOD!
Price: $314.40
View
Availability: Back Order
Sparkfun Item #: DEV-16382 -

The Binho Nova Multi-Protocol USB Host Adapter allows one to interface their computer directly to hardware circuits. This device is powered by the USB connection to the host PC and is also able to provide downstream power to test circuits. The Binho Nova Multi-Protocol USB Host Adapter features 5 signal pins, one x 3v3 pin, one x VUSB pin, and three x GND pins on its 10pin wire harness. The wire harness terminates with a female 1.27mm 2x5 IDC connector. In IO Mode, the five signal pins can be...

comma.ai White Panda OBD-II Interface
Price: $222.33
View
Availability: Out of Stock
Sparkfun Item #: TOL-15374 -

The comma.ai White Panda is a universal car interface for your car's OBD-II port. It allows you full access to the many communication buses of your car from a computer or a phone. Using the Panda with Cabana software (link in documents section) is like a Fitbit for your car. Track your RPMs, MPG, cornering G-force, battery life, and so much more. Panda also works as a CAN to USB adapter. The White Panda supports 3x CAN, 2x LIN, and 1x GMLAN. On the computer side, it is equipped with both USB...

Digilent Analog Discovery 2
Price: $628.70
View
Availability: Out of Stock
Sparkfun Item #: TOL-13929 -

The Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, the Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with...

Digilent BNC Adapter Board
Price: $39.08
View
Availability: Out of Stock
Sparkfun Item #: TOL-14260 -

The Digilent BNC Adapter Board is a simple add-on board intended to be used with the Digilent Analog Discovery 2, which allows you to use standard BNC-terminated test leads and probes with your pocket-sized oscilloscope. The adapter board provides BNC terminations to each of the two oscilloscope channels and enables you to AC couple or DC couple signals to the oscilloscope in the Analog Discovery. Each channel of the oscilloscope can be selected as AC or DC, coupled by adjusting the jumper...

Digital Multimeter - Basic
Price: $26.99
View
Availability: Stocked
Sparkfun Item #: TOL-12966 -

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes. With this version we've done away with the bright flashy colors that can get us into trouble and gone with a nice, neutral gray. This...

Digital Storage Oscilloscope - 100MHz (TBS2104)
OOD!
Price: $6,148.03
View
Availability: Back Order
Sparkfun Item #: TOL-14925 -

The Tektronix TBS2104 Digital Storage Oscilloscope offers a 9-inch WVGA display, 20 million point record length and 1GS/s sample rate. With this oscilloscope you will be able to capture and display significantly more signal to speed up evaluations of designs. On-waveform cursor readouts and 32 automated measurements allow users to easily and confidently analyze signals. The TekVPI® probe interface works with traditional BNC connections, while also enabling wide application coverage with active...

DSO Nano V3 - Pocket-Sized Digital Oscilloscope
Price: $233.00
View
Availability: Out of Stock
Sparkfun Item #: TOL-11702 -

An oscilloscope is an awesome tool to have around the shop. Unfortunately, most scopes take up quite a bit of bench space and they're not very portable. The DSO Nano v3, on the other hand, is a 32bit digital storage oscilloscope that fits in the palm of your hand! Based on ARM -M3, it’s equipped with a 320x240 color display, internal 2MB storage, USB port and recharging function. It’s compact, simple to operate and perfect for everything from the test bench to field work. The version 3 of DSO...

Heat Shrink Kit
Price: $14.35
View
Availability: Stocked
Sparkfun Item #: PRT-09353 -

We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors, lots of sizes, nothing too long. We specially requested some of the sizes with heat sensitive glue which significantly increases stress relief and water proofing. This kit includes 95 pieces of heat shrink, all of varying colors and sizes, and comes in a...

Heaterizer XL-3000 Heat Gun
Price: $25.14
View
Availability: Back Order
Sparkfun Item #: TOL-10326 -

The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. It's great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly. Features: 300 watts of heating power 110v operation only Documents: Instruction Manual Videos ...

Hot-air Rework Nozzles - Y1126
OOD!
Price: $26.86
View
Availability: Back Order
Sparkfun Item #: TOL-07925 -

Hot-air rework nozzles compatible with all of our rework stations. Sold in single units by model number. Documents: Spec Sheet

Hot-air Rework Replacement Element - Temp Controlled
OOD!
Price: $35.84
View
Availability: Back Order
Sparkfun Item #: TOL-11130 -

Here's a replacement heating element for our hot-air rework stations. It's compatible with Sunkko stations and our own branded rework station. The element is the same for other manufacturers and the connector can be modified by a skilled user to work with other manufacturers. This element includes a thermocouple element at the tip of the air flow with two wires to be connected to a temperature sensing circuit.

Hot-Air Rework Station - 303D
OOD!
Price: $234.20
View
Availability: Back Order
Sparkfun Item #: TOL-14557 -

This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit displays a digital readout of the actual air temperature with a flow rate of up to 23L per minute. This very powerful unit can be used for multiple applications including standard SMD reflow/repair/removal, thermal IC stress testing, thermoplastic welding, and shrink-wrapping. Each 303D Hot-Air Rework Station has two knobs on the front of the case to...

Li-Ion/Polymer Battery Charger/Balancer - 80W, 5A
OOD!
Price: $60.83
View
Availability: Back Order
Sparkfun Item #: PRT-10473 -

This charger accurately balances and charges Lithium Polymer, LiFe (A123), NiCd and NiMH batteries. It will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle. The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either in the field, by using a 12V input such as a car battery, or at home with a 12V power supply. Bundled with the charger are...

Logic Pro 8 - USB Logic Analyzer
OOD!
Price: $2,021.17
View
Availability: Back Order
Sparkfun Item #: TOL-13196 -

Do you need big logic analysis in a small package? That's exactly what the Logic Pro 8 brings you. The Logic Pro 8 is a 8-channel USB logic analyzer with so much style it'll make your cell phone jealous. Simply connect it to your computer with the included USB 3.0 cable, attach your test probes and install the Saleae Logic software and you'll be debugging in no time. Along with adding 4 more channels of signal capture, the Logic Pro 8 differs from the Logic 4 by increasing the max sample rate,...

Multimeter Probes - Needle Tipped
OOD!
Price: $8.89
View
Availability: Back Order
Sparkfun Item #: TOL-12078 -

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great for testing your SMD components! Each pair of cables come in standard red/black colors with caps to protect the needle tip leads. Features: 36" Long Videos ...

SkyRC IMAX B6 V2 Professional Balance Charger / Discharger
OOD!
Price: $65.33
View
Availability: Back Order
Sparkfun Item #: PRT-16793 -

The SkyRC B6 V2 is a DC input high-performance, micro-processor controlled charge/discharge/DC/DC converter with battery management suitable for all mainstream battery types(LiPo / LiFe / Li-Ion / LiHV / NiMH / NiCd / Pb). The charger delivers dedicated 60W integrated power and charge current can up to 6A . Additionally, it supports DJI Mavic/Inspire Battery with maximum 4A charge power. The SkyRC B6 V2 has a powerful and high speed micro controller with the ARM® Cortex®-M3 32 bits high speed...

Smart SMD Tester
OOD!
Price: $50.21
View
Availability: Back Order
Sparkfun Item #: TOL-10829 -

This smart SMD tester is essentially a pair of multimeter tweezers. This allows you to troubleshoot circuits with small SMD parts without having to fumble with large probes or long wires. Test resistors, capacitors and diodes one-handed! Features: Resistance Range: 300Ω/3KΩ/30KΩ/300KΩ ±(1.0%+5) 3M/30MΩ ±(2%+5) Capacitance Range: 3n/30n/300n/3µ/30µ/300µF ±(3%+5) 3000µ/30000µF ±(5%+5) Powered by One CR2032 Button Cell Battery Unit Symbol Display Weighs only 68g Auto Range Auto Scan Videos ...

Tenergy T4s Intelligent Universal Charger - 4-Bay
Price: $56.14
View
Availability: Out of Stock
Sparkfun Item #: TOL-14457 -

The 4-Bay T4s Intelligent Universal Charger from Tenergy is an automatic smart charger compatible with almost all types of rechargeable batteries, thereby eliminating the need to own multiple chargers. Capable of automatically identifying and charging Lithium Ion (Li-ion), LiFePO4, NiMH and NiCD rechargeable batteries, the T4s applies the appropriate charging mode, whether it be a constant charge current (CC), constant charge voltage (CV) or trickle charge. The T4s is able to independently...

USB Digital Multimeter - Auto-Ranging (RS232 Output)
Price: $107.71
View
Availability: Out of Stock
Sparkfun Item #: TOL-12967 -

It seems like everything plugs in to your computer these days, and this digital multimeter is no exception. This auto-ranging multimeter will test AC and DC voltage and current as well as capacitance, resistance, frequency and even temperature. It features a large, easily readable display for use in the field as well as the ability to connect to your computer for data logging, processing and analysis. It has all of the basic functions that you expect from a good digital multimeter including...

USB Logic Analyzer - 25MHz/8-Channel
OOD!
Price: $35.84
View
Availability: Back Order
Sparkfun Item #: TOL-15033 -

Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART's mysterious baud rate? Or do you want to reverse engineer an SPI protocol? These all sound like jobs for a logic analyzer! With the growing ubiquity of UART, I2C, and SPI sensors, logic analyzers are becoming a tool everyone needs in their toolbox or on their workbench. This 8-channel USB Logic Analyzer with support for sampling rates of up to 24MHz provides a good while economic option making it a great tool for...