Products 1-48 of 78
Show
3-Axis MEMS Accelerometer - MMA8452Q
Sale!
Price: $3.40
View
Availability: Back Order
Sparkfun Item #: COM-10953 -

"The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. The MMA8452Q has user selectable full scales of ±2g/±4g/±8g with high pass filtered data as well as non filtered data...

3D Printer Heater 19V@38W
Sale!
Price: $11.03
View
Availability: Stocked-NoBackOrder
DFRobot Item #: FIT0282 -

3D Printer Heater 19V@38W Introduction This is a Heater used to heating the hot end which is very popular for 3D printers such as Reprap, Ultimaker and Makerbot. It has a right angle which make it easy to be installed at the hot end. 1.6m wire is long enough to suit most situation.  The bright red color gives a bright warning of its heat!      Specification  Voltage:19V Power:38W Wire length:1.6m head diameter:5.8mm-6mm Head lenght:25mm Shipping List Heater x1 ...

50 Channel D2523T Helical GPS Receiver
Sale!
Price: $110.63
View
Availability: Stocked
Sparkfun Item #: GPS-09566 -

50 Channel D2523T Helical GPS Receiver Description: The D2523T is a compact GPS smart-antenna engine board, which comes equipped with a Sarantel GeoHelix high-gain active antenna and GPS receiver circuits. The module is based around the high performance 50-channel u-blox 5 platform. The omni-directional antenna provides great sensitivity, even when you don't have a clear view of the sky. Whether this receiver is in your pocket or under your car seat, you are likely to pickup a rock...

ADH8066 Evaluation Board
Sale!
Price: $57.44
View
Availability: Stocked
Sparkfun Item #: CEL-10741 -

ADH8066 Evaluation Board Description: The evaluation board for the ADH8066 Cell Module breaks out all the pins to the module and provides you with the necessary support hardware to get you up and running. The ADH8066 board attaches to any USB port and appears as a standard com port. Power up the board with 6-12 VDC, turn on the module, and you can start sending and receiving AT commands via HyperTerminal or your favorite terminal program. The board comes assembled as shown so you don't...

Allen Screw Kit
Sale!
Price: $1.09
View
Availability: Stocked
Sparkfun Item #: TOL-11731 -

"This pack of 4-40 screws comes with a matching hex key. Each screw is 10mm in length. These are left over production stock from the original version of the BigTime Watch Kit so they won’t be around for long. Includes: 4x screws 1x hex key Dimensions: 10mm long"

ATmega128RFA1 Development Board
Sale!
Price: $52.50
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: DEV-11197 -

"The ATmega128RFA1 is a portmanteau of sorts – two separate components combined to form one device; half microcontroller, half RF transciever. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontroller and best-in-class 2.4GHz RF transceiver providing industry’s highest RF performance for single-chip devices, with a link budget of 103.5dBm. The ATmega128RFA1 features Wake-on Radio, 32-bit MAC symbol counter, temperature sensor,...

AVR ISP Shield - PTH Kit
Sale!
Price: $22.94
View
Availability: Stocked
Sparkfun Item #: DEV-11168 -

AVR ISP Shield - PTH Kit Description: Did you know that your Arduino can spawn other Arduinos? Don't worry, it can't do it autonomously so you won't wind up with a replicator situation (-gate, not -Trek). The point is, the ArduinoISP sketch allows your Arduino to act as a programmer. You can use this awesome power to burn bootloaders onto ATMega chips, turning them into Arduino-compatible microcontrollers! In the past, this required a breadboard and a whole mess...

Barometric Pressure Sensor - BMP085 Breakout
Sale!
Price: $17.93
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-11282 -

Barometric Pressure Sensor - BMP085 Breakout Description: This is a breakout board for the Bosch BMP085 high-precision, low-power digital barometer. The BMP085 offers a measuring range of 300 to 1100 hPa with an accuracy down to 0.2 hPa in ultra-high resolution mode. It's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. Writing your own code for it requires...

Barrel Jack Extension Cable - M-F (3 ft)
Sale!
Price: $2.01
View
Availability: Stocked
Sparkfun Item #: COM-11706 -

"Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Don’t hack apart a nice clean barrel jack connection just because it won’t reach, this male-to-female barrel jack extension cable will make the reach. This cable is terminated with 5.5x2.1mm barrel connectors, one male and one female, and fits most of...

Battery Holder 2xAAA with Cover and Switch
Sale!
Price: $1.73
View
Availability: Back Order
Sparkfun Item #: PRT-09543 -

"This 2xAAA battery holder puts a nice finishing touch on your battery powered project. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project. The leads are about 150mm long, and the last 5mm of them are tinned. Dimensions: 63 x 25 x 15mm"

Bluetooth - LiPo Add-On for Makey Makey
Sale!
Price: $37.44
View
Availability: Stocked
Sparkfun Item #: WRL-11378 -

Bluetooth & LiPo Add-On for Makey Makey Description: The MaKey MaKey is really cool, but wouldn't it be cooler if it wasn't tethered to your computer? There's only one way to find out: Go wireless. Our Bluetooth & LiPo Add-On for MaKey MaKey frees your MaKey invention from the bonds of USB wired connection. Data is passed over a Bluetooth HID connection to your Bluetooth enabled computer which will recognize it as a Bluetooth wireless keyboard. Power is handled through a...

Bluetooth Mate
Sale!
Price: $74.69
View
Availability: Stocked
Sparkfun Item #: WRL-09358 -

Bluetooth Mate Description: The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)! Bluetooth Mate has the same pin out as the...

Bluetooth Modem - BlueSMiRF RP-SMA
Sale!
Price: $79.99
View
Availability: Stocked
Sparkfun Item #: WRL-00158 -

Bluetooth Modem - BlueSMiRF RP-SMA Description: The BlueSMiRF RPSMA is the latest Bluetooth wireless serial cable replacement from Spark Fun Electronics! These modems work as a serial (RX/TX) pipe. Press the 'A' character from a terminal program on your computer and an 'A' will be pushed out the TX pin of the Bluetooth® module. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target, from modem to module, even to any...

Bluetooth Module Breakout - Roving Networks (RN-41)
Sale!
Price: $68.94
View
Availability: Stocked
Sparkfun Item #: WRL-10559 -

Bluetooth Module Breakout - Roving Networks (RN-41) Description: This is a simple breakout for the Roving Networks Bluetooth module. All pertinent pins are broken out and labeled. This new version's headers are unpopulated. Check below for appropriate headers. The module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth stack is completely encapsulated. The end user just sees serial characters...

Breakout Board for SC16IS750 I2C-SPI-to-UART IC
Sale!
Price: $17.97
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-09981 -

Breakout Board for SC16IS750 I2C/SPI-to-UART IC Description: This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel, high-performance UART. As an application example: we use this chip on our WiFly Shield to allow an Arduino to communicate with the WiFly RN-131G module - which is normally controlled via a UART - using an SPI interface. This allows for greater communication speeds and frees up the Arduino's UART for...

Color 24-Bit LCD 4-3in PSP Touch Screen
Sale!
Price: $31.06
View
Availability: Stocked
Sparkfun Item #: LCD-08448 -

Color 24-Bit LCD 4-3in PSP Touch Screen Description: This is a 4-wire resistive analog touch screen. Intended to mate with the 24-Bit PSP display, this unit comes with a handy adhesive backing to stick to the PSP display. 4-wire ribbon with 1mm pitch. This touch screen is not intended to be hacked into an off-the-shelf Play Station Portable. It is solely meant to be a nice add-on to our 24-Bit color display. Hantouch part # : HT043A-NCOFD52 Check out SparkFuns touchscreen tutorial! Please...

Connector for e-paper display
Sale!
Price: $1.09
View
Availability: Back Order
Sparkfun Item #: PRT-10151 -

Connector for e-paper display Description: This is the 26-pin SMD connector that mates with our e-paper character displays. Documents: Datasheet

DIP Sockets Solder Tail - 24-Pin 0-6
Sale!
Price: $0.58
View
Availability: Stocked
Sparkfun Item #: PRT-09095 -

DIP Sockets Solder Tail - 24-Pin 0.6 Description: Dip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!  Number of pins include: 8, 14, 16, 18, 24, 28, and 40. This is a 600mil wide 24-pin socket.

EasyUSB
Sale!
Price: $49.93
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WIG-10155 -

EasyUSB Description: The EasyUSB gives your microcontroller access to 2MB that can be seen as a mass storage device in most operating systems. Now your microcontroller can easily read and write files in a file system that your computer can easily understand. Check the SDK below for examples and libraries. Features: FAT16 file system 2MB memory size 3.0-5.2V input voltage Baud rate: 9600 - 921600 bps DIP8 package Documents: Datasheet Programming Interface EasyUSB SDK ...

Electrician Tape - Red
Retail: $1.58
Price: $1.21
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TET10020T -

Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It is very useful in our daily life.For example,when your wire was bitten by something, it will come in handy.Specifications Material: PVC Adhesive: Nature Rubber, Pressure Sensitive AdhesiveThickness: 0.13mm Width: 18mm Length: 10m Use temperature: 0~80\xb0C MAX use voltage: 600VElongation at break: 150% ~ 220% tensile stress: 2.5-3Kg/cm Features For insulating...

FEZ Panda
Sale!
Price: $42.46
View
Availability: Stocked
Sparkfun Item #: DEV-10146 -

FEZ Panda Description: FEZ Panda is a tiny open-source board running Microsoft .NET Micro Framework. This means, you can write code with much more efficiency using C# programming language under free Microsoft Visual C# express. FEZ Panda also includes JTAG access for those who wish to use their own firmware instead of NETMF. Using an Arduino-form-factor, you can use just about any Arduino shield. In addition, many libraries are already included like FAT file system,...

Go-Between Shield
Sale!
Price: $19.57
View
Availability: Stocked
Sparkfun Item #: DEV-11002 -

"You hear it all the time in the Arduino community, “will this shield work with my other shield?.” I think we’ve all been disappointed to find that two of our favorite shields compete for control of a digital pin here or a serial pin there. While there are sometimes some clever workarounds from elegant code modifications to aggressive ‘greenwiring,’ Mayhew Labs may have come up with the simplest solution thus far: The Go-Between Shield. The Go-Between Shield...

GPS Module - Venus638FLPx-L 20Hz (14 Channel)
Sale!
Price: $45.94
View
Availability: Stocked
Sparkfun Item #: GPS-10919 -

"Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applications. It offers very low power consumption, high sensitivity, and best in class signal acquisition and time-to-first-fix performance. Venus638FLPx contains all the necessary components of a complete GPS module, includes 1.2dB cascaded system NF RF front-end, GPS baseband signal processor, 0.5ppm TCXO, 32.768kHz RTC crystal, RTC LDO regulator, and passive components. It...

GPS Shield
Sale!
Price: $16.17
View
Availability: Stocked
Sparkfun Item #: GPS-10102 -

GPS Shield Description: Adding GPS to your Arduino has never been easier. The multiple GPS receivers attach easily to the shield, and with the example sketch, you will be able to locate your exact position within a few meters. Here's where we are. GPS also gives you amazingly accurate time! A GPS quickstart guide is available for this product. With the GPS Shield you can add GPS functionality to your Arduino. A connector for the popular EM-406 GPS receiver is populated on the...

Hacksaw kits
Retail: $30.03
Price: $23.10
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-THT03872T -

This hacksaw kits can cut metal, pipe, twist, plastic, rubber, glass, ceramic tile, etc. It includes one junior hacksaw and 6 replacement hacksaw blades and 2 special saw blade replace the blade to meet your different needs. Also it include 2 aiguilles, it can cut glass, ceramic and so on. This hacksaw kits suits for handicraft art or other household use. This kit will be a good helper for maker.Package listHacksaw kits x1Wiki & External links ...

Humidity and Temperature Sensor - SHT15 Breakout
Sale!
Price: $48.24
View
Availability: Stocked
Sparkfun Item #: SEN-08257 -

Humidity and Temperature Sensor - SHT15 BreakoutThis is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip. These sensors are really impressive! Very sensitive and straight forward to use. Board comes assembled and tested with the...

HVFF Copper Union Straight Pneumatic Hand Valves
Retail: $2.90
Price: $2.23
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-DIY14520V -

If you need a general-purpose pipe joints valve switch, it can help you, you need to choose a tube of 4mm diameter, may be a fluorine plastic or PU tube, but you should notice that silicone tube can not be used with it. It can work at harsh environment with long worklife.Featureshand valve are deisgned to turn on and off the airflowSuitable for 4mm tubeLong worklifeSpecificationsMedia: Air or VacuumOperating Pressure?0 ~ 1.0 MPaNegative Pressure?-750mmHgPressure Proof?1.5 MPaOperating...

Laser-Guide Kit
Retail: $16.22
Price: $12.47
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-SPR23875L -

This laser-guide kit is used for object detections with laser, the kits includes an laser emitter, laser modulator, laser receiver and a lens, the laser modulator modulates the laser, which emittes from laser emitter, to180Khz, when the laser echos back, the laser receiver receives the signal, and reports the MCU.With the advantage of laser, this kit can detects object white-color or black-color in a range of more than 50cm. please refer to here for the Demos. Please install the components as...

LED Light Bar - Red (SMD)
Sale!
Price: $4.54
View
Availability: Stocked
Sparkfun Item #: COM-12015 -

LED Light Bar - Red (SMD) Description: Want to make a 12 ft GPS wall clock? This is the perfect item to light it up! Even if that's not the project you are looking to build, these light bars pack quite a bit of light into three small red LED's and they are very easy to set up with no soldering required. The red LED Light Bar is a pre-packaged strip of 3 high-output LEDs powered by 12VDC. Each unit comes with a fully assembled and tested PCB with current limiting resistors,...

LED Light Bar-Green
Sale!
Price: $3.83
View
Availability: Stocked
Sparkfun Item #: COM-00679 -

LED Light Bar-GreenDescription: The LED Light Bar is a pre-packaged strip of 3 high-output LEDs powered by 12VDC. We don't have specifics on the output luminocity, but take a look at the example GPS Wall Clock project to get an idea. Each unit comes with a fully assembled and tested PCB with current limiting resistors, a wall-mount holder (backed with double-stick tape), and a connection cable. Each LED Light Bar absorbs approximately 30mA @ 12V.Dimensions: 3.08x 0.59"...

LED Light Bar-Red
Sale!
Price: $3.83
View
Availability: Stocked
Sparkfun Item #: COM-09029 -

LED Light Bar-RedDescription: The LED Light Baris a pre-packaged strip of 3 high-output LEDs powered by 12VDC. Wedon't have specifics on the output luminocity, but take a look at theexample GPS Wall Clock project to get an idea. Each unit comes with afully assembled and tested PCB with current limiting resistors, a wall-mount holder, and a polarized connectioncable//. Each LED Light Bar absorbs approximately 30mA @ 12V.Dimensions: 3.08x 0.59" (78x15mm)Mounting hole OD is 0.176"...

LED Matrix - Dual Color - Small
Sale!
Price: $5.69
View
Availability: Stocked
Sparkfun Item #: COM-00681 -

"LED Matrix with dual-color LEDs. This small matrix has both bright-red and bright-green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. The picture does not quite do the matrix justice. The Red and Green LEDs are quite clear, and turning both on creates a nice yellow color. Dimensions: 0.275x1.25x1.25" Documents: Datasheet " ...

LED Matrix - Serial Interface - Red-Green-Blue
Sale!
Price: $68.94
View
Availability: Stocked
Sparkfun Item #: COM-00760 -

LED Matrix - Serial Interface - Red/Green/Blue Description: This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It's even reprogrammable! 7 software selectable colors are available! Unit comes with a Red/Green/Blue LED Matrix assembled with a RGB Matrix Backpack Controller. Check out the LED Coffee Table tutorial! Documents:...

Machine Screw Nut - 4-40
Sale!
Price: $0.17
View
Availability: Stocked
Sparkfun Item #: PRT-10232 -

Machine Screw Nut - 4-40 Description: We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And how each nut's dimensional variations can only be measured on the sub-atomic level. We could say all that, but...

MiniMoto - DRV8830 Breakout
Sale!
Price: $11.98
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-11890 -

MiniMoto - DRV8830 Breakout Description: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With an operating voltage range of 2.7V to 6.8V and a current limit of 1A the DRV8830 is a versatile little driver.  In addition to the benefit of being controlled via I2C, which frees up data lines and processing on the CPU to be used for other tasks, the MiniMoto has the lowest voltage output capability...

Nut - Nylon Locknut (4-40, 10 pack)
Sale!
Price: $1.73
View
Availability: Stocked
Sparkfun Item #: PRT-10460 -

"Description: These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place. Note: These come in packs of 10."

Nylon Nut - 4-40
Sale!
Price: $0.30
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: PRT-10231 -

Nylon Nut - 4-40 Description: Sometimes you need to fasten something down with a nut, but don't want to worry about shorting anything. A nylon nut can save you the hassle of shorting out the ground plane on a PCB without enough spacing around the mounting hole. Sold as single units.

Open Logic Sniffer - Probe Cable Kit
Sale!
Price: $14.47
View
Availability: Stocked
Sparkfun Item #: TOL-10086 -

Open Logic Sniffer - Probe Cable Kit Description: This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. Each cable connects 8 of the 16 buffered input channels, plus ground.

pcDuino - WiFi Dongle
Sale!
Price: $26.16
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WRL-11713 -

"Want to free your pcDuino from the oppression of wired networking? This USB Wifi dongle has been tested to work with the pcDuino, simply plug it into the USB port and you’re ready to connect to a nearby wireless network! Note: We’ve found that this also works well with the BeagleBone Black as well as the Raspberry Pi! Dimensions: 2" x 0.5" Documents: RasPi WiFi Tutorial " ...

Pi Tin for the Raspberry Pi - Black
Sale!
Price: $9.36
View
Availability: Stocked
Sparkfun Item #: PRT-11980 -

Pi Tin for the Raspberry Pi - Black Description: The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. As you may have noticed,...

Pi Tin for the Raspberry Pi - Blue
Sale!
Price: $9.36
View
Availability: Stocked
Sparkfun Item #: PRT-11981 -

Pi Tin for the Raspberry Pi - Blue Description: The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. As you may have noticed,...

Pi Tin for the Raspberry Pi - Green
Sale!
Price: $9.36
View
Availability: Stocked
Sparkfun Item #: PRT-11901 -

Pi Tin for the Raspberry Pi - Green Description: The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. As you may have noticed,...

PIC32MX 32-bit Microcontroller
Sale!
Price: $13.53
View
Availability: Stocked
Sparkfun Item #: COM-10129 -

PIC32MX 32-bit Microcontroller Description: The PIC32MX is a high performance 32-bit microcontroller. We bought these in the wrong package and don't have any use for them. Check out the datasheet below for what you can do with this IC. Features: High-Performance 32-bit RISC CPU: MIPS32® M4K® 32-bit core with 5-stage pipeline 80 MHz maximum frequency 1.56 DMIPS/MHz (Dhrystone 2.1) performance at zero Wait state Flash access Single-cycle multiply and high-performance divide unit...

Quadstepper Motor Driver Board
Sale!
Price: $89.87
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: ROB-10507 -

Quadstepper Motor Driver Board Description: The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The logic levels are selectable between 3.3V and 5V by way of a jumper. The bus header allows you to control all four motors with only 6 IO pins by...

Quick Disconnect - Female 1-5 (bag of 50)
Sale!
Price: $5.11
View
Availability: Stocked
Sparkfun Item #: PRT-11463 -

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about 1/5" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Female 1/4" (bag of 50)
Sale!
Price: $5.11
View
Availability: Stocked
Sparkfun Item #: PRT-11461 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about ¼" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/4" (bag of 50)
Sale!
Price: $5.11
View
Availability: Stocked
Sparkfun Item #: PRT-11462 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about ¼" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/5" (bag of 50)
Sale!
Price: $5.11
View
Availability: Stocked
Sparkfun Item #: PRT-11464 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about 1/5" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...