Products 97-136 of 136
Show
Servo - Hitec HS-805BB (Giant Scale)
OOD!
Price: $83.37
View
Availability: Back Order
Sparkfun Item #: ROB-11881 -

"This beast is the Hitec HS-805BB servo. Able to take in 6 volts and deliver an impressive 343 oz-in. of maximum torque at 0.14 sec/60°, this is a heavy duty servo and is not to be taken lightly! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-805BB servo comes standard with a 3-pin power and control cable, Y-harness, and all hardware listed below. Note: This servo can draw around 800mA, so keep that...

Servo - Hitec HS-85MG (Micro Size)
Price: $62.50
View
Availability: Back Order
Sparkfun Item #: ROB-11887 -

"This is the epitome of the phrase “appearances can be deceiving,” and trust us, with the Hitec HS-85MG that couldn’t be more true. The HS-85MG is able to take in 6 volts and deliver 49 oz-in. of maximum torque at 0.14sec/60°, and this guy is only about the size of a bottle cap! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-85MG servo comes standard with a 3-pin power and control...

Servo Controller
Price: $7.50
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TEL9763S -

A simple Controller& Tester for Servo. Connect your servos to this module then you can control the servo by the potentiometer on this module. With this module, you can easily control your servo manually, even without any microcontroller! 2 servos (bush or bushless) can be controlled or tested at the same time.Application Idea Servo testing Control the servo manuallyFeatures Digital output Max Output Current: 15mA Supply voltage:4.5V-6V Weight: 15g Dimension:42.5 x24.0 x 23.5 mm ...

Servo extension cable 150mm
OOD!
Price: $1.03
View
Availability: Back Order
DFRobot Item #: FIT0296 -

This is a 150mm (5.91") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable. |Specification| Length:150mm Red: PWR, Black:GND, White:Signal |ShippingList| Servo extension cable 150mm (5.91") x1 ...

Servo extension cable 300mm
OOD!
Price: $1.21
View
Availability: Back Order
DFRobot Item #: FIT0033 -

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable.|Specification| Length:300mm (11.8 in)|ShippingList| 300mm Servo extension cable x1

Servo Extension Cable 600mm (23.62 inch)
OOD!
Price: $1.64
View
Availability: Back Order
DFRobot Item #: FIT0297 -

This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1" jumper cable. |Specification| Length: 600mm (23.62") Red: VCC Black: GND White: Signal|ShippingList| Servo extension cable 600mm (23.62") x1 ...

Servo Y extension cable (300mm)
OOD!
Price: $1.72
View
Availability: Back Order
DFRobot Item #: FIT0334 -

This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed contacts on a 0.1" spacing.The split occurs near the midpoint of the cable, so the two male ends can be separated by up to approximately 300mm. Black: GND Red?Servo power White?Signal |Applications| RC car,...

Servo Y extension cable (500mm)
OOD!
Price: $2.15
View
Availability: Back Order
DFRobot Item #: FIT0335 -

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed contacts on a 0.1" spacing.The split occurs near the midpoint of the cable,so the two male ends can be separated by up to approximately 500mm(19.68"). Black: GND Red?Servo power White?Signal |Applications| RC...

Small Stepper Motor
OOD!
Price: $12.09
View
Availability: Back Order
Sparkfun Item #: ROB-10551 -

"These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. When using a current limiting driver such as the Easydriver or Big Easydriver, a 12 volt power supply can be used as long as you adjust the current level to 400mA or less. If using a non current limited driver (like a L293D or an H-bridge) you will need to lower your input voltage to keep the motor current below 400mA. This is a Bipolar motor. Features: Stride Angle (degrees)...

SparkFun Haptic Motor Driver - DRV2605L
OOD!
Price: $13.83
View
Availability: Back Order
Sparkfun Item #: ROB-14538 -

"Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. This board breaks out Texas Instruments' DRV2605L Haptic Motor Driver, which adds meaningful feedback from your devices using the breakout and an Arduino-compatible device. The DRV2605L is capable of driving two different types of motors, ERM and LRA. It is important to know, however, that the default firmware for the DRV2605L is set for use with ERM-type motors. We have created an Arduino...

Standard Gearmotor - 1 RPM (3-12V)
OOD!
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12219 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 3000:1 and operate up to 12 volts and deliver a stall torque of 2995 oz-in. and a max speed of 1 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 3000:1 Stall Torque: 2995.2 oz-in. (@ 12V) Speed: 1 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 10 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12367 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 300:1 and operate up to 12 volts and deliver a stall torque of 368 oz-in. and a max speed of 10 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 300:1 Stall Torque: 368 oz-in. (@ 12V) Speed: 10 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 168 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12144 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 18:1 and operate up to 12 volts and deliver a stall torque of 27.3 oz-in. and a max speed of 168 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 18:1 Stall Torque: 27.3 oz-in. (@ 12V) Speed: 168 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 2 RPM (3-12V)
OOD!
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12154 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 1500:1 and operate up to 12 volts and deliver a stall torque of 1497 oz-in. and a max speed of 2 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 1500:1 Stall Torque: 1497 oz-in. (@ 12V) Speed: 2 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 20 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12288 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 150:1 and operate up to 12 volts and deliver a stall torque of 185 oz-in. and a max speed of 20 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 150:1 Stall Torque: 185 oz-in. (@ 12V) Speed: 20 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 30 RPM (3-12V)
OOD!
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12532 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 100:1 and operate up to 12 volts and deliver a stall torque of 137 oz-in. and a max speed of 30 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 100:1 Stall Torque: 137 oz-in. (@ 12V) Speed: 30 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 303 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12147 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 10:1 and operate up to 12 volts and deliver a stall torque of 16.8 oz-in. and a max speed of 303 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 10:1 Stall Torque: 16.8 oz-in. (@ 12V) Speed: 303 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 4 RPM (3-12V)
OOD!
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12162 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 900:1 and operate up to 12 volts and deliver a stall torque of 992 oz-in. and a max speed of 4 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 900:1 Stall Torque: 992 oz-in. (@ 12V) Speed: 4 RPM (@ 12V) No Load Current: 160 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 51 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12150 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 56:1 and operate up to 12 volts and deliver a stall torque of 77 oz-in. and a max speed of 51 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 56:1 Stall Torque: 77 oz-in. (@ 12V) Speed: 51 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 6 RPM (3-12V)
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12472 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 500:1 and operate up to 12 volts and deliver a stall torque of 613 oz-in. and a max speed of 6 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 500:1 Stall Torque: 613 oz-in. (@ 12V) Speed: 6 RPM (@ 12V) No Load Current: 95 mA (@ 12V) Stall Current: 0.5A (@...

Standard Gearmotor - 81 RPM (3-12V)
OOD!
Price: $47.73
View
Availability: Back Order
Sparkfun Item #: ROB-12310 -

"These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 50:1 and operate up to 12 volts and deliver a stall torque of 57 oz-in. and a max speed of 81 RPM. Each standard gearmotor sports a 6mm diameter D-shaft. Features: Voltage: 3 - 12 Volts Gear Ratio: 50:1 Stall Torque: 57 oz-in. (@ 12V) Speed: 81 RPM (@ 12V) No Load Current: 195 mA (@ 12V) Stall Current: 0.5A (@...

Stepper Motor - 125 oz.in (200 steps/rev, 600mm Wire)
OOD!
Price: $64.59
View
Availability: Back Order
Sparkfun Item #: ROB-13656 -

"Stepper motors are great motors for position control. They can be found in desktop printers, plotters, 3d printers, CNC milling machines, and anything else requiring precise position control. Steppers are a special segment of brushless motors. They are purposely built for high-holding torque. This high-holding torque gives the user the ability to incrementally “step” to the next position. This results in a simple positioning system that doesn’t require an encoder. This makes...

Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
OOD!
Price: $72.93
View
Availability: Back Order
Sparkfun Item #: ROB-10848 -

"These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important. Note: It looks like the datasheet for this stepper may not be accurate. When connecting this motor to a bi-polar driver you’ll want to wire it according to the wiring diagram in the documents below. Features: Step...

Stepper Motor - 68 oz.in (400 steps/rev)
Price: $29.48
View
Availability: Stocked
Sparkfun Item #: ROB-10846 -

"These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is a Bipolar motor. Features: Step Angle (degrees) : 0.9 2-Phase Rated Voltage: 3V Rated Current: 1.7A/Phase 5mm Diameter Drive Shaft Holding Torque: 48N.cm NEMA 17 form factor Documents: Datasheet Product Video " ...

Stepper Motor with Cable
Price: $26.00
View
Availability: Stocked
Sparkfun Item #: ROB-09238 -

"This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3kg*cm 5mm Diameter Drive Shaft Winding resistance: 32.6 Ω Winding inductance: 48 mH Max flux linkage: 1.8 Vs Maximum Detent Torque: 0.016 N.M Total inertia (kg.m.m): 3.5 Kg.m.m Total friction (kg.m/s): 4 Kg.m/s NEMA 16 Mounting Hole Pattern (31mm) Motor Width: 42mm (1.67”)...

SyRen Single 10A DC Motor Driver
OOD!
Price: $86.18
View
Availability: Back Order
DFRobot Item #: DRI0024 -

The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. Out of the box, the SyRen 10 can supply a single DC brushed motor with up to 10A continuously. Peak currents of 15A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up...

SyRen Single 25A DC Motor Driver
OOD!
Price: $129.12
View
Availability: Stocked
DFRobot Item #: DRI0025 -

The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs in combat or 180lbs for general purpose robotics. Out of the box, the SyRen 25 can supply a single DC brushed motor with up to 25A continuously. Peak currents of 45A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up...

SyRen Single 50A DC Motor Driver
OOD!
Price: $206.84
View
Availability: Back Order
DFRobot Item #: DRI0026 -

The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. Out of the box, the SyRen 50 can supply a single DC brushed motor with up to 50A continuously. Peak currents of 100A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. With just one SyRen driver you can control a motor with: analog voltage, radio control,...

TB6600 Stepper Motor Driver
OOD!
Price: $34.48
View
Availability: Back Order
DFRobot Item #: DRI0043 -

What is a stepper motor? Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps. How to control a stepper motor?The fast way to control a stepper motor is just using a stepper motor driver (controller). And TB6600 arduino is just what you need.TB6600 arduino is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is...

Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)
OOD!
Price: $7.76
View
Availability: Back Order
DFRobot Item #: DRI0040 -

This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces. Both sides of the module are desgined with standard XH2.54 pins, which allows you to plug it on a breadboard or prototype board. Caption|Specification| Logic Input Voltage (VCC): 3.3-5V Load Supply Voltage (VM): 3.3-10V Maximum Continuous Operating Current: 1500mA( Single)...

TMC260 Stepper Motor Driver Shield  For Arduino
OOD!
Price: $49.99
View
Availability: Back Order
DFRobot Item #: DRI0035 -

This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper motor drive shied adoptes a TMC260 chip which is the first energy efficient high precision microstepping driver IC for bipolar stepper motors with integrated power MOSFETs. The unique high resolution sensorless load detection...

Tower Pro 9g SG-90 Mini Servo
Price: $9.35
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RMS09001S -

    Tower Pro SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, mounting hardware. Specification Operating Voltage: 4.8 ~ 6.0V Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V) Torque: 1.6kg/cm(4.8V) Dead Band Width: 5usec Temperature Range: -30?~+60? Cable Length: 25cm Brand name: Tower Pro location of each pin: red (+), brown (-), yellow (signal). ...

Tower Pro SG-5010 Servo
Price: $20.01
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RMS05010S -

    Tower Pro SG5010 is a high quality but really low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, even a dozen of hardware as shown. Features 3 pole ferrite, all nylon gear. Top ball bearing location of each pin: red (+),brown (-), yellow (signal). Specification Operating Voltage: 4.8~6.0V Operating Speed: 0.20sec/60 degree(4.8V)~0.16sec/60 degree(6.0V) Torque: 5.2kg/cm(4.8V)~6.5Kg/cm(6.0V) Dead Band Width: 4usec Temperature...

TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
OOD!
Price: $6.72
View
Availability: Back Order
DFRobot Item #: SER0043 -

The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo’s operation is more similar to a DC motor than a standard servo as only rotation direction and speed can be controlled. There is also no hardware stop inside so that the shaft can rotate freely. Compared to an ordinary DC motor, a 360-degree servo motor does not require...

TT Geared Motor with Back Shaft (160rpm 6v L Shape)
OOD!
Price: $6.03
View
Availability: Back Order
DFRobot Item #: FIT0016 -

This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts. It is designed to easily incorporate the DFRobot Encoder. These motors are inexpensive, small, easy to install, and ideally suited for use in a mobile robot. The DFRobot ROMEO microcontroller is able to complete the closed-loop PID making use of the Gravity:TT Motor Encoders Kit. We recommend this rubber wheel for this motor. |Specification|Electrical...

Veyron 1x5A Brushless Motor Driver
OOD!
Price: $82.83
View
Availability: Back Order
DFRobot Item #: DRI0014 -

The new Veyron brushless motor controller DFBLDC(1x5A) provides 3 different kinds Input modes(PPM?UART?ANALOG) it is especially designed for brushless motors which are widely used in robotics industry because of their high-performance and good reliability. |Specification| Model Size:74mm X 40mm X 19mm Moedl Weight: 50g Input Voltage: 8~30V(12~24V recommended) Operating Temperature: -30??70? Input modes: PPM?UART?ANALOG?0~5V) Baudrate Types:1200/2400/4800/9600/14400/19200/28800/38400/57600/11520...

Veyron Servo Driver (24 Channel)
OOD!
Price: $49.82
View
Availability: Back Order
DFRobot Item #: DRI0029 -

Veyron Servo Driver (24-Channel) is a multiple servo controller, especially designed for humanoid robots, spider robots, robotic arms, and many other likewise applications. The controller integrates wireless data transmission interface, which is fully compatible with DFRobot Bluetooth module, APC220 wireless data transmission module and Xbee module. The controlling modes include real-time, timer and constant speed. Veyron Servo Driver (24-Channel) is the most powerful Mirco USB servo driver...

Vibration Motor
OOD!
Price: $3.74
View
Availability: Back Order
Sparkfun Item #: ROB-08449 -

"A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.6V operating range, these units shake crazily at 3V. Once anchored to a PCB or within a pocket, the unit vibrates softly but noticeably. This high quality unit comes with a 3M adhesive backing and reinforced connection wires. Documents: Datasheet...

Wheel - 65mm (Rubber Tire, Pair)
OOD!
Price: $5.13
View
Availability: Back Order
Sparkfun Item #: ROB-13259 -

"These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you will be able to get almost any beginners robot project moving. These wheels are sold in packs of two. Documents: Product Video "

Wind & Water Power Turbines
Price: $7.47
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PS81110TR -

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines outputs small power for small projects such as LED, suitable for DIY projects. Note that the output of the turbine is AC, Rectifiers are needed if you want to change it into DC. As we tested, the turbines can power 5 LEDs with a wind speed 20 km/h, and 10 LEDs with a wind speed 50 km/h. you can use this...