This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.0 A at 3.4 V, allowing for a holding torque of 18kg-cm (176N-cm) (200rpm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the
Dual Bipolar Stepper Motor Shield for Arduino (DRV8825).
Notice: please carefully confirm techical details (torque, dimension, mounting, etc) for your project(s) before purchasing.
|Applications|
- Printer
- 3D Printer
- CNC
- Robotics
- Linear Actuators
|Specification|
- Model No: 42BYGH40-18-22A-C5.18
- Step Angle (degrees) :1.8
- 2 Phase
- Voltage: 3.4V
- Current: 1.0A
- Resistance: 1.7±10% Ohm/Phase
- Inductance: 4.3±20% mH/Phase
- Holding Torque: 3600 g.cm
- Detent Torque: 400 g.cm
- Insulation Class: B
- Life: 6000 hours
- Gear Ratio: 5.18:1
- Hold Torque with Gearbox: 18kg·cm (176N·cm) (200rpm)
- Dimension: 42×42×40mm(1.65x1.65x1.57")
- Mounting: 4 x M3
|Documents|
|ShippingList|
- Stepper Motor with Planet Gear Box ×1