Expansion Shield X200 for Raspberry Pi B+/2B/3B

Item #: DFR0357
Bin:
There are no reviews yet Write a review
Price: $72.23 inc GST
    The product is in stock Availability: Discontinued

    The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raaspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.
    |Specification|
    • Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
    • VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
    • Audio: 3.5mm MIC in jack
    • 3.5mm stereo audio jack
    • SPDIF output
    • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
    • Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
    • IR sensor (38KHz)
    • USB Storage: Self-powered USB hub with 3 ports
    • Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
    • GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
    • Misc: Power output socket
    • Camera flex slot so camera can still be used with the expansion board attached
    • DIP switch to remove connection from RPi’s pin header
    • Directly connected on top of the Raspberry Pi using the board GPIO header pins
    • No wiring nor soldering is required
    • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
    • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
    • Dimensions: 85 x 56mm(3.35 x 2.20") (Same size as Raspberry Pi)
    Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!
    |Documents||ShippingList|
    • X200 Raspberry Pi expansion board x1
    • HDMI adapter x1
    • USB adapter x1
    • 2.4GHz WIFI antenna x1
    • nylon spacers (M3 x 20mm) x4
    • nylon screws (M3 x 6mm) x8