Products 3457-3504 of 3524
Show
WiFi Shield V3 For Arduino PCB Antenna (802.11b/g/n)
OOD!
Price: $84.55
View
Availability: Back Order
DFRobot Item #: TEL0078 -

DFRobot WiFi Shield, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connect the WIFI network (No AT command setup required, which is often very complex). This module uses dynamic power management to...

WiFi Shield V3 For Arduino RPSMA (802.11b/g/n)
OOD!
Price: $87.14
View
Availability: Back Order
DFRobot Item #: TEL0079 -

DFRobot WiFi Shield for Arduino, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connect the WIFI network (No AT command setup required, which is often very complex). This module uses dynamic power...

WiFi SMD Module - CC3000
Price: $37.44
View
Availability: Back Order
Sparkfun Item #: WRL-12820 -

"The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your project simple. Instead of the more standard UART communication method, the CC3000 module utilizes an SPI interface allowing you, the user, to control the flow of data as you please. What makes the CC3000 unique is its ability to associate to a WiFi access point using a cell phone app in the Texas Instruments process called SmartConfig. This is a great...

WiFiBee-MT7681 (Support Arduino WiFi Wireless Programming)
OOD!
Price: $25.69
View
Availability: Back Order
DFRobot Item #: TEL0107 -

The WiFi Bee MT7681 is an Arduino WiFi XBee module based on the MT7681 serial Wi-Fi module. It is compatible with an XBee slot, supports Arduino wireless programming and is ideal for Internet of Things (IoT), home automation and robotics applications.The WiFi Bee supports the IEEE802.11b/g/n standard protocols, with 2.4G Wi-Fi bands, 14 channels and WEP/WPA-PSK/WPA2-PSK/TKIP/AES encryption methods, compatible with many mainstream routers. It has STA and AP working modes, is free to switch, and...

WiFly RN-171 802-11b-g Serial Module - Roving Networks
OOD!
Price: $40.85
View
Availability: Back Order
Sparkfun Item #: WRL-11049 -

WiFly RN-171 802.11b/g Serial Module - Roving Networks Description: The RN-171 is a small form factor, ultra-low power embedded TCP/IP module. The RN-171 is a standalone, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices. The module is pre-loaded with firmware to simplify integration and minimize...

WiiChuck Adapter
Price: $2.55
View
Availability: Back Order
Sparkfun Item #: DEV-09281 -

"The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. The Wii Nunchuck is loaded with features – a 2-axis joystick, two buttons and a 3 axis ±2g accelerometer – and any device capable of I2C can communicate with it! The WiiChuck allows you to interface with the...

WiiChuck Adapter (Arduino Compatible)
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: DFR0062 -

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. Compared with standard WiiChuck, the DFRobot WiiChuck has extra 4 pins which allow you connect it to two devices. The Wii Nunchuck is loaded with features -- a 2-axis joystick, two buttons and a 3 axis ?2g accelerometer -- and any...

Wild Thumper 6WD Chassis - Black (34:1 gear ratio)
Price: $318.27
View
Availability: Back Order
Sparkfun Item #: ROB-11056 -

"This is easily the most rugged and beefy robot chassis in its price range. The Wild Thumper 6-Wheel platform is the best of both worlds: It takes almost no time to go from un-boxing to rolling chassis, but it’s also ready to be expanded on and makes great base stock for a serious ‘bot. Each of the six motors are mounted on independent suspension and outfitted with 34:1 steel gearboxes (no more stripped gears!). The motors are wired together on a terminal strip inside the 2mm thick...

Wind & Water Power Turbines
Price: $7.47
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PS81110TR -

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines outputs small power for small projects such as LED, suitable for DIY projects. Note that the output of the turbine is AC, Rectifiers are needed if you want to change it into DC. As we tested, the turbines can power 5 LEDs with a wind speed 20 km/h, and 10 LEDs with a wind speed 50 km/h. you can use this...

Wire Connector Set
OOD!
Price: $0.52
View
Availability: Back Order
DFRobot Item #: FIT0452 -

This wire connector set is made by flame retardant material. It works very well in extreme environment. |Specification| Type: XPE012 Rated current: 10A Rated voltage: 380V Shell material: flame retardant Temperature resistance: 105 ? Connector: 2|ShippingList| Wire Connector Set x1 ...

Wire Strippers
Price: $11.43
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-THT10428T -

This wire strippers is extremely handy and comfortable to use. It used for stripping and cutting the most commonly used stranded and single wire. It is able to strip gauges 16 to 26 AWG and 0.2-1.25 mm fiber jackets.Specifications 26,24,20,18,16AWG settings 0.2,0.35,0.5,0.9,1.25 MM settings Package listWire Strippers x1Wiki & External links ...

Wire Strippers - 20-30AWG
OOD!
Price: $22.13
View
Availability: Back Order
Sparkfun Item #: TOL-14763 -

"These are higher grade wire strippers from Techni-Tool with a comfortable, curved grip making them an affordable option if you need to remove the protective sleeve from a desired wire. These are an essential part to any hacker’s arsenal and are able to strip 20-30AWG solid core and 22-32AWG stranded wire nicely. These Wire Strippers even have a locking mechanism to make sure you don’t accidently damage a wire before stripping and to help protect the hardened steel tool heads." ...

Wire Strippers - 22-30AWG
OOD!
Price: $18.72
View
Availability: Back Order
Sparkfun Item #: TOL-14762 -

"These are your basic, run-of-the-mill wire strippers from Techni-Tool with a comfortable grip making them an affordable option if you need to remove the protective sleeve from a desired wire. These are an essential part to any hacker’s arsenal and are able to strip 22-30AWG (0.65-0.25mm) solid core wire nicely. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video " ...

Wire Strippers - 30AWG (Hakko)
Price: $16.93
View
Availability: Back Order
Sparkfun Item #: TOL-12630 -

"These are extremely handy and comfortable to use wire strippers from Hakko. These are an essential part to any hacker’s arsenal and are able to strip 30AWG wire wrap wire nicely as well as the standard 22AWG hook up wire. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video " ...

Wire Wrap Tool
OOD!
Price: $54.38
View
Availability: Back Order
Sparkfun Item #: TOL-14915 -

"Now for a hand tool requested by almost every experienced engineer! This Wire Wrap Tool wraps, unwraps, and even strips the appropriate wire diameter with a unique built-in stripper blade. This tool is ideal for work bench use and is extremely handy to find in tool kits in all service and repair applications. In addition to versatility, convenience, and reliability, this Wire Wrap Tool offers exceptional value. This tool is recommended for .025” square terminals on .100” centers,...

Wire Wrap Wire - Blue (Solid, 30AWG, 100ft)
OOD!
Price: $23.74
View
Availability: Back Order
Sparkfun Item #: PRT-14913 -

"This is a 100ft spool of blue wire wrap wire. These wires are 30AWG with solid cores. Ideally suited for wire wrapping and many other applications, this wire is OFHC (oxygen free high conductivity) making it a flexible yet abrasion resistant wire. Documents: Datasheet (p. 44) "

Wire Wrap Wire - White (Solid, 30AWG, 100ft)
OOD!
Price: $23.74
View
Availability: Back Order
Sparkfun Item #: PRT-14914 -

"This is a 100ft spool of white wire wrap wire. These wires are 30AWG with solid cores. Ideally suited for wire wrapping and many other applications, this wire is OFHC (oxygen free high conductivity) making it a flexible yet abrasion resistant wire."

Wireless Charger& Receiver
Price: $22.18
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-PCW2138WC -

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless...

Wireless GamePad V2.0 for Arduino
OOD!
Price: $102.57
View
Availability: Back Order
DFRobot Item #: DFR0182 -

The Wireless Joystick v2 for Arduino is the first gamepad based on Arduino from DFRobot. It support Xbee, Bluetooth, RF and Wifi via the Xbee socket. Makes it possible to custom your own wireless communication for controlling your robots, mobile platforms, UAVs and etc.This gamepad supplies two analog sticks, one reset button and 16 programmable buttons, using PS2 style button layout, which allows you to completely customize your controlling experience. It runs on three "AAA" Batteries or a...

Wireless Keyboard with Touchpad for Raspberry Pi and LattePanda
OOD!
Price: $33.62
View
Availability: Back Order
DFRobot Item #: DFR0330 -

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry and operate. Build-in removable rechargable Li-ion battery that has longer standby time. Perfect for PC, Pad, Andriod TV Box, Google TV Box, Xbox360, PS3, HTPC/IPTV, and Raspberry Pi etc.Notice: After 3 minutes without any operating will swtich to sleep mode, press any key about 1s...

Wireless SD Shield
Retail: $20.75
Price: $10.60
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCS01109S -

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it,you should select the switch to the right direction. About the wireless module, it only uses you two...

WiringPi Board
Price: $1.45
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RPB4809WP -

Wixel
OOD!
Price: $27.23
View
Availability: Back Order
Sparkfun Item #: WRL-10665 -

"The Wixel is a great general-purpose module from Pololu. By taking advantage of the feature-rich CC2511F32 microcontroller from Texas Instruments, the Wixel provides integrated 2.4 GHz wireless communication, 32 KB of flash memory, 4 KB of RAM, full-speed USB interface and 15 general-purpose I/O lines (including 6 analog inputs). A single Wixel can be used as a computer-interface device, such as a USB-to-serial adapter, and it can even serve as the main controller for your system. With two or...

WIZnet Serial-to-Ethernet Gateway - WIZ110SR
OOD!
Price: $45.10
View
Availability: Back Order
Sparkfun Item #: DEV-09476 -

"The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. The main components of the WIZ110SR are a WIZnet W5100 embedded ethernet controller...

WRTnode Dev Cables Kit
OOD!
Price: $6.21
View
Availability: Back Order
DFRobot Item #: FIT0414 -

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable.WRTnode(A Mini OpenWRT Dev Board) is a high performance CPU, low power consuming, cheap and small dev board that can run OpenWRT OS and also easy to port all open source software of Linux. OpenWRT is a Linux distribution for embedded devices, the framework to build an application without having to build a...

WRTnode Standard Shield
OOD!
Price: $17.07
View
Availability: Back Order
DFRobot Item #: DFR0352 -

This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board.WRTnode ?A Mini OpenWRT Dev Board?uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome since there are only pin headers and Micro USB available onboard. This standard shielf for WRTnode not only expands GPIO, SPI, I2C, etc., but also expands the number of USB interfaces to four, at the same time providing...

WS2801 Breakout
Sale!
Price: $5.99
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-10504 -

WS2801 Breakout Description: This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one side and an RGB LED on the other. Several of these breakouts can be chained together to form a display or an addressable string. Voltage, ground, clock and data are broken out as input on one side and output on the other to standard 0.1" spaced headers. Documents: Schematic Eagle Files Datasheet (WS2801)...

WT8266-S1 WiFi Module Based on ESP8266
OOD!
Price: $11.89
View
Availability: Back Order
DFRobot Item #: TEL0109 -

WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc. The module's core processor arduino ESP8266 integrates an enhanced version of Tensilica's L106 Diamond series 32-bit processor with smaller package size and 16 bit compact mode, main frequency support 80 MHz and 160 MHz,...

XBee 1mW Trace Antenna - Series 1 (802.15.4)
Price: $34.04
View
Availability: Stocked
Sparkfun Item #: WRL-11215 -

"This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide! Note: If you are using these outside of...

XBee 1mW U.FL Connection - Series 1 (802.15.4)
Price: $34.04
View
Availability: Back Order
Sparkfun Item #: WRL-08666 -

"This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide! Note: If you are using these outside of...

XBee 1mW Wire Antenna - Series 1 (802.15.4)
Price: $34.04
View
Availability: Stocked
Sparkfun Item #: WRL-08665 -

"This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide! Note: If you are using these outside of...

XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh)
Price: $35.74
View
Availability: Back Order
Sparkfun Item #: WRL-11217 -

"This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2.5, but have updated...

XBee 2mW PCB Antenna - Series 2 (ZigBee Mesh)
OOD!
Price: $46.37
View
Availability: Back Order
DFRobot Item #: TEL0059 -

This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware....

XBee 2mW RPSMA - Series 2 (ZigBee Mesh)
Price: $39.15
View
Availability: Back Order
Sparkfun Item #: WRL-10416 -

"This is the XBee XB24-Z7SIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2.5, but have updated...

XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)
Price: $28.93
View
Availability: Back Order
Sparkfun Item #: WRL-10414 -

"This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. These are essentially the same hardware as the older Series 2.5, but have updated...

XBee Explorer Dongle
Price: $28.69
View
Availability: Stocked
Sparkfun Item #: WRL-09819 -

"This is the XBee Explorer Dongle unit for the XBee line. With the XBee Explorer dongle you can now plug the unit directly into your USB port. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA. You get the red board only. XBee modules sold below. Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide! Documents: Schematic Eagle Files X-CTU...

XBee Explorer USB
Price: $28.69
View
Availability: Stocked
Sparkfun Item #: WRL-08687 -

XBee Explorer USBDescription: This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. You get the red board only. XBee modules and USB cable sold below. Documents: Schematic X-CTU Software USB FTDI Drivers for...

XBee Pro 60mW PCB Antenna - Series 1
OOD!
Price: $71.54
View
Availability: Back Order
DFRobot Item #: TEL0063 -

This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.|Specification| 3.3V @ 215mA 250kbps...

XBee Pro 60mW PCB Antenna - Series 1 (802.15.4)
OOD!
Price: $61.27
View
Availability: Back Order
Sparkfun Item #: WRL-11216 -

"This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not...

XBee Pro 60mW U.FL Connection - Series 1 (802.15.4)
Price: $61.27
View
Availability: Stocked
Sparkfun Item #: WRL-08710 -

"This is the very popular 2.4GHz XBee XBP24-AUI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. If...

XBee Pro 60mW Wire Antenna - Series 1 (802.15.4)
Price: $61.27
View
Availability: Stocked
Sparkfun Item #: WRL-08742 -

"This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Not...

XBee PRO 63mW PCB Antenna  -Series 2C (ZigBee Mesh) S2C
OOD!
Price: $72.23
View
Availability: Back Order
DFRobot Item #: TEL0017 -

This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.The XBee/XBee-PRO ZB (S2C) introduces the SPI serial...

XBee Pro 63mW PCB Antenna - Series 2B (ZigBee Mesh)
Sale!
Price: $61.27
View
Availability: Stocked
Sparkfun Item #: WRL-10418 -

"This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Series 2B modules use a different hardware configuration...

XBee Pro 63mW Wire Antenna - Series 2B (ZigBee Mesh)
Price: $61.27
View
Availability: Back Order
Sparkfun Item #: WRL-10421 -

"This is the XBee XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Series 2B modules use a different hardware configuration...

XBee Pro 900 Wire Antenna
Sale!
Price: $76.59
View
Availability: Stocked
Sparkfun Item #: WRL-09097 -

"The XBee-PRO 900 RF module is ideally suited for low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, the XBee-900 is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application. As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi’s Drop-in Networking solutions including gateways and adapters....

Xbee Shield
Price: $16.98
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-MCS01407S -

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial, port for easier prototyping. Features arduino main board compatible 3 indicator LED?ON/Sleep, RSSI, ASSOC?for XBee Full size with free drills Reset button for XBee and base board Provide maximal 500mA under 3.3V Full break out for XBee Full break out for the base board Package list XBee Shield PCBA...

Xbee Shield for Arduino
OOD!
Price: $18.62
View
Availability: Back Order
DFRobot Item #: DFR0015 -

The Arduino XBee shield is designed to meet wireless sensor networks such as wifi, bluetooth 2.0/4.0 and zigbee. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. This xbee shield for arduino can be directly stack on top of Arduino Uno / Leonardo and Mega. It provides a 5-3.3V voltage converter to allow 3.3V communication modules to interface Arduino 5V system. The compatibility of this arduino xbee shield is now...

Xbee USB adapter (FTDI ready)
OOD!
Price: $32.67
View
Availability: Back Order
DFRobot Item #: DFR0050 -

The upgraded DFRobot Xbee USB adapter is designed for the XBee module configuration parameters to facilitate using or to work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino FIO/pro/mini?lilypad Arduino and so on. It's a must-have for interactive electronic installations and projects.The adapter allows the PC to configure XBee / Bluetooth module and the...