Products 1-19 of 19
Show
Split Shipping - Ship Me Stocked Stuff Now and The Rest Later
Price: $5.50
View
Availability: Stocked
MK-Misc Item #: MWTI-1 -

Ordered a mix of order-on-demand items we're bring in for you and items we have on the shelf?We can courier the stocked items to you now and the OOD items later with this upgrade-shipping item.

SparkFun Servo Trigger
OOD!
Price: $27.38
View
Availability: Back Order
Sparkfun Item #: WIG-13118 -

"The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the Servo Trigger is able to tell an attached servo motor to move from position A to position B. To use the Servo Trigger, you simply connect a hobby servo and a switch, then use the on-board potentiometers to adjust the start/stop positions and the transition time. You can use a hobby servos in your projects without having to do any...

MP3 Trigger
Price: $95.74
View
Availability: Stocked
Sparkfun Item #: WIG-13720 -

MP3 TriggerDescription: Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards. In addition,...

SparkFun MOSFET Power Controller
OOD!
Price: $11.23
View
Availability: Back Order
Sparkfun Item #: PRT-11214 -

"MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice. The MOSFET Power Controller came about because microcontrollers, like the Arduino or LilyPad Arduino, can only supply a limited amount of current. Sometimes, though, you want to control something...

SparkFun OBD-II UART
OOD!
Price: $80.68
View
Availability: Back Order
Sparkfun Item #: WIG-09555 -

"This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 connector mates with our DB9 to OBD-II cable listed below. On-Board Diagnostics, Second Generation (OBD-II) is a set of standards for implementing a computer based system to control emissions from...

WAV Trigger
Price: $83.58
View
Availability: Stocked
Sparkfun Item #: WIG-13660 -

"The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI. Trigger inputs can be connected directly to switches and...

EggBot Deluxe Kit
Price: $363.41
View
Availability: Out of Stock
Sparkfun Item #: WIG-11564 -

"The EggBot is back and it’s been improved! The classic open-source art robot that captured our hearts (by drawing on spherical or egg-shaped objects up to 4.25 inches in diameter) has been upgraded with some of the most popular kits from the EggBot line-up. As always, the EggBot is still super adjustable and designed to draw on all kinds of things that are normally “impossible” to print on. You can draw on anything like golf balls, light bulbs, mini pumpkins, and even things...

Mindkits Website Test Item Dos
Price: $0.59
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: MWTI-2 -

Website Test Item Unos Description:Items ordered from this test will not be fullfilled. You have been warned You may have noticed that the SparkFun design team has been busy churning out all kinds of great graphics that we've used in videos, blog posts and web content. Well now you can stick those sweet graphics to your projects/tools/notebooks with the new and improved SparkFun Sticker Sheet. When leaving soldering iron burns on something is not enough, use these stickers to leave...

Mindkits Website Test Item Tres
Price: $0.59
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: MWTI-3 -

Website Test Item Unos Description:Items ordered from this test will not be fullfilled. You have been warned You may have noticed that the SparkFun design team has been busy churning out all kinds of great graphics that we've used in videos, blog posts and web content. Well now you can stick those sweet graphics to your projects/tools/notebooks with the new and improved SparkFun Sticker Sheet. When leaving soldering iron burns on something is not enough, use these stickers to leave (or cover...

Quadstepper Motor Driver Board
Price: $112.30
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: ROB-10507 -

Quadstepper Motor Driver Board Description: The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The logic levels are selectable between 3.3V and 5V by way of a jumper. The bus header allows you to control all four motors with only 6 IO pins by...

SparkFun Audio-Sound Breakout - WTV020SD
OOD!
Price: $32.22
View
Availability: Back Order
Sparkfun Item #: WIG-11125 -

"The WTV020SD is a small, simple IC for embedding audio-playback into your next project. These devices are commonly used in children’s toys and “talking” retail displays. This breakout board allows you to access the functionality of the WTV020SD to give a voice to your next project. The breakout board includes a battery connector and a micro-SD card slot. Simply load your audio files onto a micro-SD card and plug it in, power up the module and trigger the playback. Playback...

SparkFun EL Sequencer
OOD!
Price: $56.45
View
Availability: Back Order
Sparkfun Item #: COM-12781 -

"The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of electroluminescent wire. EL wire is flexible plastic cord that glows brightly when high-voltage AC is applied to it. It’s available in numerous colors (see the related products below), runs cool, and requires very little current, but can be difficult to work with because of the high-voltage requirements. The EL Sequencer can safely switch...

SparkFun Large Digit Driver
OOD!
Price: $11.23
View
Availability: Back Order
Sparkfun Item #: WIG-13279 -

"The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of our large 6.5" 7-segment displays. Large numerical displays are a great addition to any project where you want to be able to see information at a distance. Scorekeepers and lap timers would be a great application for large 7-segment LED displays. The SparkFun Large Digit Driver can easily be attached to the back of the 7-segment display by soldering all 10 castellations pins at the...

SparkFun Logomatic v2 - Serial SD Datalogger (FAT32)
OOD!
Price: $88.75
View
Availability: Back Order
Sparkfun Item #: WIG-12772 -

"The SparkFun Logomatic v2 takes everything we learned with logging analog or serial data from your projects over the years and boils it down to an easy to use device, that is now more adaptable than ever! Version 2 incorporates the LPC2148 with microUSB, battery charging, FAT32 formatting, and microSD support. This allows us to use the SparkFun LPC2148 USB bootloader for even easier and faster modification of the firmware. No programmer required! The Logomatic v2 uses a USB mass storage stack...

SparkFun PicoBoard
OOD!
Price: $72.60
View
Availability: Back Order
Sparkfun Item #: WIG-11888 -

"The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4 additional inputs that can sense electrical resistance via included cables. Designed for educators and beginners, the PicoBoard is a good way to get into the very basics of programming and reading sensors. Be...

SparkFun Servo Trigger - Continuous Rotation
Price: $32.92
View
Availability: Stocked
Sparkfun Item #: WIG-13872 -

"The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the CR Servo Trigger is able to tell an attached servo motor to move from position A to position B. To use the CR Servo Trigger, you simply connect a hobby servo and a switch, then use the on-board potentiometers to adjust the start/stop positions and the transition time. You can use a hobby servo in your...

SPI Shortcut
Price: $43.14
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: TOL-09235 -

SPI Shortcut Description: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can access any SPI device such as sensors, media, and even program some devices. You can change all of the SPI features (frequency, data order, etc.) on the fly with no programming involved! Comes with a simple-to-use terminal interface. All you need is the FTDI USB driver and a basic terminal program....

Text-to-Speech Module - Emic 2
OOD!
Price: $100.95
View
Availability: Back Order
Sparkfun Item #: DEV-11711 -

"Ever wish your project could just speak up and tell you what’s going on? Why not give it a voice? The Emic-2 Text-to-Speech module makes it really easy to give voice to your embedded projects. The Emic-2 was designed by Parallax in conjunction with Grand Idea Studio to make voice synthesis a total no-brainer. Simply connect the Emic-2 to a 5VDC power supply, connect a speaker to the speaker output (or 1/8" headphone jack) and send it a stream of serial text at 9600bps. The module...

Tsunami Super WAV Trigger
OOD!
Price: $131.23
View
Availability: Back Order
Sparkfun Item #: WIG-13810 -

"The Tsunami Super WAV Trigger is the next evolutionary step beyond the original WAV Trigger. Based on a new generation ARM Cortex m7, the Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently, and can have it’s own volume setting, allowing you to create the perfect interactive mix of music, dialog and sound effects. The Tsunami also supports true seamless looping over an...