Products 1-48 of 80
Show
Hook-Up Wire - Assortment (Solid Core, 22 AWG)
Price: $26.38
View
Availability: Stocked
Sparkfun Item #: PRT-11367 -

"An assortment of colored wires: you know it’s a beautiful thing. Six different colors of solid core wire in a cardboard dispenser box. Sit this on your workbench and stop worrying about having a piece of wire around! Features: 22 AWG 25 ft / Spool 6 Spools in Six Different Colors Colors are Red, Blue, Yellow, Green, Black, and White Dispenser Box! "

Jumper Wires Standard 7" M/M - 30 AWG (30 Pack)
Price: $3.25
View
Availability: Stocked
Sparkfun Item #: PRT-11026 -

"If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that come with the SparkFun Inventor’s Kit, they’re less rugged than the premium jumper wires but they’re great for bread-boarding, they’re less expensive and we sell them in packs of 30! They may not hold up to year after year of abuse but they’re...

Alligator Test Leads - Multicolored (10 Pack)
Price: $4.76
View
Availability: Stocked
Sparkfun Item #: PRT-12978 -

"Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you’re just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have. Each lead in this pack of tern is 50cm long with a rubber shrouded alligator clip on each end. There are five different colors, you get two each...

Jumper Wires - Connected 6" (F/F, 20 pack)
Price: $3.22
View
Availability: Stocked
Sparkfun Item #: PRT-12796 -

"These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each other and can either be pulled apart in any quantity (from 1-20, of course) or kept whole based on you...

Hook-up Wire - Red (22 AWG)
Price: $4.22
View
Availability: Stocked
Sparkfun Item #: PRT-08023 -

"Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'."

Jumper Wires - Connected 6" (M/F, 20 pack)
Price: $3.22
View
Availability: Stocked
Sparkfun Item #: PRT-12794 -

"These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each other and can either be pulled apart in any quantity (from 1-20, of course) or kept whole based on you needs. These jumper wires can be used for pretty much everything! They work great with breadboards,...

Jumper Wires Premium 6" F/F Pack of 10
Price: $6.58
View
Availability: Stocked
Sparkfun Item #: PRT-08430 -

"This is a SparkFun exclusive! These are 155mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of ten jumpers (colors shown). Dimensions: 155mm +/-5mm long"

JST Jumper 2 Wire Assembly
Price: $1.59
View
Availability: Stocked
Sparkfun Item #: PRT-09914 -

"This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Datasheet Illumitune Project (tutorial) (video) " ...

Hook-up Wire - Yellow (22 AWG)
Price: $4.17
View
Availability: Stocked
Sparkfun Item #: PRT-08024 -

"Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'."

Hook-Up Wire - Assortment (Stranded, 22 AWG)
Price: $28.25
View
Availability: Stocked
Sparkfun Item #: PRT-11375 -

"An assortment of colored wires: you know it’s a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on your workbench and stop worrying about having a piece of wire around! Features: 22 AWG 25 ft / Spool 6 Spools in Six Different Colors Colors are Red, Blue, Yellow, Green, Black, and White Dispenser Box! "

Jumper Wires - Connected 6" (M/M, 20 pack)
Price: $3.22
View
Availability: Stocked
Sparkfun Item #: PRT-12795 -

"These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each other and can either be pulled apart in any quantity (from 1-20, of course) or kept whole based on...

IC Hook with Pigtail
Price: $8.26
View
Availability: Stocked
Sparkfun Item #: CAB-09741 -

"These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own. Wire length is 2.5" long. Male pin easily inserts into breadboard or other standard 0.1" connector."

Hook-up Wire - White (22 AWG)
Price: $4.17
View
Availability: Stocked
Sparkfun Item #: PRT-08026 -

"Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'."

Ribbon Cable - 10 wire (15ft)
Price: $8.02
View
Availability: Stocked
Sparkfun Item #: CAB-10647 -

"Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. length of 10-wire ribbon cable. Check the related products below for crimp-on connectors that will fit this cable. Documents: Datasheet " ...

JST Jumper 3 Wire Assembly
Price: $2.50
View
Availability: Stocked
Sparkfun Item #: PRT-09915 -

"This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Datasheet Illumitune Project (tutorial) (video) " ...

Raspberry Pi - GPIO Ribbon Cable (6")
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: CAB-11489 -

"This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Check the related items below for the mating connector! Dimensions: 6" long Documents: Datasheet " ...

Hook-up Stranded Wire - Black (22 AWG)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: PRT-08867 -

"Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spools of 25'."

Jumper Wire - JST Black Red
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: PRT-08670 -

"This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector "

Multimeter Probes - Tweezers
OOD!
Price: $7.99
View
Availability: Back Order
Sparkfun Item #: TOL-11060 -

"Testing surface-mount components with standard test leads is anything but easy. Everyone has their own method: some people tackle it with teamwork and have a friend (or grad student) hold the probes, some people have adapted a sort of chopsticks-like technique, but the best way by far is probably just to buy these handy tweezer probes! Tweezer probes connect to your existing instrumentation with shrouded banana connectors and allow you to easily test small parts with one hand. The large...

Jumper Wires Premium 4" M/M - 20 AWG (30 Pack)
Price: $3.22
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: PRT-13870 -

"These are 101mm long 20AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female-to-female jumpers to create a male-to-female jumper. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as one pack of 30 jumpers with an assortment of colors. Dimensions: 4" long"

JST to Breadboard Jumper (3-pin)
Price: $2.48
View
Availability: Stocked
Sparkfun Item #: CAB-13685 -

"This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins. Wire length is 140mm (about 5.5 inches) long. The adapter’s wires have been color coded to Red, Black, and Yellow. Additionally, the female JST connector featuring a basic 2mm pitch while the male hookup pins can...

Banana to Alligator Cable
OOD!
Price: $6.38
View
Availability: Stocked
Sparkfun Item #: CAB-00509 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" long"

Alligator Clip with Pigtail (4 Pack)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: CAB-13191 -

"This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to. Each Alligator Clip with Pigtail cable has a wire length of 30cm (that’s a little less than 1ft) and a male pin that easily...

Molex Jumper 2 Wire Assembly
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: PRT-09918 -

"This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end. It also comes with the mating connector for the Molex. Dimensions: 6" length Documents: Datasheet "

Jumper Wire - PTH Black White
Price: $1.53
View
Availability: Out of Stock
Sparkfun Item #: PRT-08672 -

"This is a simple two wire cable. One end has a 2-pin 0.1" pitch female connector, the opposite end is stripped and tinned stranded wire. Dimensions: 120mm length"

Banana to Alligator Coax Cable
OOD!
Price: $7.99
View
Availability: Stocked
Sparkfun Item #: CAB-00508 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with stress relief sleeves. Dimensions: 36" long"

Raspberry Pi GPIO Shrouded Header - 2x20 (RPi2, B+)
Price: $1.58
View
Availability: Stocked
Sparkfun Item #: PRT-13054 -

"This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 2 and Model B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity. Check the related items below for the mating cable! Documents: Datasheet " ...

UHF RFID Cable (TNC to RP-SMA)
OOD!
Price: $8.07
View
Availability: Back Order
Sparkfun Item #: CAB-14132 -

"This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerful reader board. This cable is perfect for extending pre-existing cables to give yourself a better range of operations when managing your RFID projects. Each cable is capable of a nominal impedance of 50Ω with a cutoff frequency of 39GHz. If you are looking for a good antenna to pair this cable with, we recommend our UHF RFID Antenna. Note: If...

JST Jumper 4 Wire Assembly
Price: $2.50
View
Availability: Stocked
Sparkfun Item #: PRT-09916 -

"This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Datasheet " ...

Automotive Jumper 2 Wire Assembly
OOD!
Price: $4.04
View
Availability: Back Order
Sparkfun Item #: PRT-09923 -

"This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it’s better for higher current applications. Dimensions: 6" length Documents: Datasheet "

Banana to Banana Cables
OOD!
Price: $7.99
View
Availability: Back Order
Sparkfun Item #: CAB-00507 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long"

Banana to IC Hook Cables
OOD!
Price: $7.99
View
Availability: Back Order
Sparkfun Item #: CAB-00506 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long"

BNC Probe Kit
OOD!
Price: $24.13
View
Availability: Back Order
Sparkfun Item #: CAB-09486 -

"The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe to either a BNC jack, RCA jack, or a PCB mount. This kit was designed for use with our Digital Oscilloscope Kit, but there are sure to be a variety of other uses. Kit Includes: 20MHz professional probe with tip, hook connector and ground alligator clip BNC-to-RCA(male) converter BNC-to-PCB mount converter " ...

BNC to Alligator Cable
OOD!
Price: $7.99
View
Availability: Back Order
Sparkfun Item #: CAB-00504 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Dimensions: 36" Long"

Hook-up Stranded Wire - Red (22 AWG)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: PRT-08865 -

"Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'."

Hook-up Stranded Wire - White (22 AWG)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: PRT-08866 -

"Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spools of 25'."

Hook-up Wire - Brown (22 AWG)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: PRT-08027 -

"Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'."

Hook-up Wire - Gray (22 AWG)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: PRT-08025 -

"Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'."

IC Hook Test Leads
OOD!
Price: $14.45
View
Availability: Back Order
Sparkfun Item #: CAB-00501 -

"These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads. Dimensions: 14" Long"

JST SH Jumper 4 Wire Assembly - 8"
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-10359 -

"This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket. Dimensions: 8" length Documents: Datasheet (cable) Connector " ...

JST SH Jumper 6 Wire Assembly - 8"
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-10361 -

"This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket. Dimensions: 8" length Documents: Datasheet (cable) Connector " ...

Jumper Wire - 0.1", 2-pin, 12"
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: PRT-10372 -

"This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing "

Jumper Wire - 0.1", 2-pin, 4"
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: PRT-10362 -

"This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing "

Jumper Wire - 0.1", 2-pin, 6"
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-10367 -

"This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing "

Jumper Wire - 0.1", 3-pin, 12"
OOD!
Price: $3.15
View
Availability: Back Order
Sparkfun Item #: PRT-10373 -

"This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing "

Jumper Wire - 0.1", 3-pin, 4"
OOD!
Price: $1.53
View
Availability: Back Order
Sparkfun Item #: PRT-10363 -

"This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing "

Jumper Wire - 0.1", 3-pin, 6"
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-10368 -

"This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing "

Jumper Wire - 0.1", 3-pin, 6" (Black, Red, White)
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-13164 -

"This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black, red, and white cables. Dimensions: 6" length"