Products 1-17 of 17
Show
SparkFun RFID Starter Kit
Hot!
Retail: $83.24
Price: $57.50
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: KIT-13198 -

"This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID cards. We’ve done away with the annoying clamshell and now offer this in the same type of box as the rest of our kits. The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach...

SparkFun Simultaneous RFID Reader - M6E Nano
OOD!
Price: $322.95
View
Availability: Back Order
Sparkfun Item #: SEN-14066 -

"The SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything. Whether you want to get started by adding an RFID reader on your toolbox with tags on all your tools or allowing access to the tree house for your secret society meetings, this board may be for you! With the Arduino shield footprint, you can connect this directly to...

RFID Reader ID-12LA (125 kHz)
Price: $48.37
View
Availability: Out of Stock
Sparkfun Item #: SEN-11827 -

"RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card. Note: The new ID-12LA is essentially the same as the...

UHF RFID Tag - Adhesive (Set of 5)
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: WRL-14151 -

"Ever wanted to play with those newfangled RFID tags? Although it’s been around for a while, the technology has been extremely cost-prohibitive and difficult to implement without being an RF engineer. This affordable product opens the door for using RFID in your own projects! These paper-thin, adhesive EPCglobal Gen2 tags work with our Simultaneous RFID reader and can be stuck to practically anything you can imagine. The tags can read and be written to — and also have a kill...

SparkFun RFID USB Reader
OOD!
Price: $40.30
View
Availability: Back Order
Sparkfun Item #: SEN-09963 -

"The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer. This new revision uses SMD headers for the RFID module, and has a solder jumper which allows you to...

RFID Tag - Transparent MIFARE Classic 1K (13.56 MHz)
Price: $4.92
View
Availability: Stocked
Sparkfun Item #: SEN-10128 -

"This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below. This tag is transparent and has a diameter of 25mm and an overall thickness of about 0.7mm. It works with MIFARE® 13.56 MHz compatible readers. The MIFARE Classic® card is fundamentally just a...

Magnetic Card Reader
Price: $74.17
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-11096 -

"This is a simple three track magnetic card reader with serial output. This reader connects to your computer with a DB9 for serial and a PS/2 for power and outputs a 9600bps 8N1 ASCII serial stream. Plug the reader into a serial port (or USB to serial converter), swipe your frequent shopper card, and you’ll see the account number plain and unencrypted on the screen. We couldn’t find a card the reader couldn’t read. No drivers needed. No software needed. Just pure, wonderful...

RFID Button - 16mm (125kHz)
OOD!
Price: $6.38
View
Availability: Back Order
Sparkfun Item #: SEN-09417 -

"This is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they’re small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-2, ID-12 and ID-20 RFID readers. We tested this RFID tag with one of our ID-12 readers and measured a maximum read distance of about 32mm. Features:...

RFID Glass Capsule (125kHz)
OOD!
Price: $8.08
View
Availability: Back Order
Sparkfun Item #: SEN-09416 -

"This is a glass, cylindrical RFID tag; it’s very similar to those implanted into pets for identification purposes. But really guys, it’s not for use inside your body. Please don’t implant this thing into yourselves. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-3LA, ID-12LA and ID-20LA RFID readers. We tested this RFID tag with one of our ID-12LA readers and measured a maximum...

RFID Module - SM130 MIFARE (13.56 MHz)
OOD!
Price: $48.37
View
Availability: Back Order
Sparkfun Item #: SEN-10126 -

"The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID MIFARE®, aside from a PCB antenna. The module communicates over UART or I2C with simple protocols. It also has 2 general purpose inputs and 2 general purpose outputs for switches, relays, etc. Check below for MIFARE® RFID tags. Note: You will need an antenna or evaluation board for this module to work. Check the related product below. Features: UART interface up to 115200bps I2C interface...

RFID Reader ID-20LA (125 kHz)
Price: $58.25
View
Availability: Stocked
Sparkfun Item #: SEN-11828 -

"RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card. Note: The new ID-20LA is essentially the same as the...

RFID Reader ID-3LA (125 kHz)
OOD!
Price: $41.91
View
Availability: Back Order
Sparkfun Item #: SEN-11862 -

"RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple to use RFID reader module from ID Innovations. The only holdups are the 2mm pin spacing and you will need an external antenna. Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card. Note: The new ID-3LA is essentially the...

RFID Tag (125kHz)
Price: $3.22
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: COM-08310 -

"You might know RFID as the technology that Big Brother uses to track your every move. Quickly, don the tinfoil hats!! Only kidding. RFID is useful for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. This basic RFID tag works in the 125kHz RF range and comes with a unique 32-bit ID. It is not re-programmable. This blank, smooth, and mildly flexible RFID tag is ready for your logo (or hand-drawn scribble)....

RFID Tag - ABS Token MIFARE Classic 1K (13.56 MHz)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: SEN-10127 -

"This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below. This tag has a diameter of 30mm with a 5mm hole in the center and an overall thickness of 2.25mm. It works with MIFARE® 13.56 MHz compatible readers. The MIFARE Classic® card is fundamentally just a...

RFID Tag - Adhesive MIFARE Classic 1K (13.56 MHz)
OOD!
Price: $4.76
View
Availability: Back Order
Sparkfun Item #: SEN-11319 -

"This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below. This tag has an adhesive backing and a diameter of 30mm with an overall thickness of 0.4mm. It works with MIFARE® 13.56 MHz compatible readers. The MIFARE Classic® card is fundamentally just a...

RFID Tag - Laundry MIFARE Classic 1K (13.56 MHz)
OOD!
Price: $6.38
View
Availability: Back Order
Sparkfun Item #: SEN-10131 -

"This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device. Check the related products below. This tag has a diameter of 13mm and an overall thickness of about 2mm. They are also waterproof for use in laundry. It works with MIFARE® 13.56 MHz compatible readers. The MIFARE Classic® card is...

SparkFun RFID Evaluation Shield - 13.56MHz
OOD!
Price: $32.22
View
Availability: Back Order
Sparkfun Item #: DEV-10406 -

"This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure to check the schematic for information on the connections. The XBee header is designed to be used with the XBee Explorer Regulated board. This board comes populated with the switches, resistors and LEDs, but...