Products 1-14 of 14
Show
SparkFun RedBot Sensor - Accelerometer
OOD!
Price: $12.27
View
Availability: Back Order
Sparkfun Item #: SEN-12589 -

The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration forces on the x, y, and z axis. By measuring the amount of acceleration (or lack there of) your robot can get a better understanding of its movements. The sensor has two 2x3 headers (one male and one female) which connect directly to the RedBot Mainboard giving you the ability to stack another I2C sensor. Just use the included RedBot library to detect bumps...

SparkFun Triple Axis Accelerometer Breakout - ADXL335
Price: $26.99
View
Availability: Stocked
Sparkfun Item #: SEN-09269 -

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of +/-3g. There is no on-board regulation, provided power should be between 1.8 and 3.6VDC. Board comes fully assembled and tested with external components installed. The included 0.1uF capacitors...

SparkFun Triple Axis Accelerometer Breakout - ADXL337
OOD!
Price: $17.57
View
Availability: Back Order
Sparkfun Item #: SEN-12786 -

The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration with a full-scale range of ±3g. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. The breakout is perfect for applications like, disk drive protection, game controllers, and image stabilization. Getting the ADXL337 Breakout set-up is easy. Simply supply the accelerometer with power (3.3V and GND),...

SparkFun Triple Axis Accelerometer Breakout - ADXL345
OOD!
Price: $33.45
View
Availability: Back Order
Sparkfun Item #: SEN-09836 -

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from...

SparkFun Triple Axis Accelerometer Breakout - ADXL362
OOD!
Price: $28.16
View
Availability: Back Order
Sparkfun Item #: SEN-11446 -

We've been using and selling Analog Devices' ADXL accelerometers for a good while now, and now we've found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power consumption levels. It measures both dynamic acceleration, resulting from motion or shock, and static acceleration, such as tilt. It's easy to communicate with the ADXL362 over SPI and built-in digital logic even enables autonomous operation for...

SparkFun Triple Axis Accelerometer Breakout - ADXL377
OOD!
Price: $45.81
View
Availability: Back Order
Sparkfun Item #: SEN-12803 -

The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range of ±200g for measuring more extreme changes in motion, shock or vibration. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. The breakout is perfect for applications like concussion and head trauma detection or high force event detection. Getting the ADXL377 Breakout set-up is easy. Simply supply...

SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
OOD!
Price: $21.10
View
Availability: Back Order
Sparkfun Item #: SEN-14480 -

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for grueling conditions that normal accelerometers aren't suited for. With a shock survivability of 10000g and a handy sleep-to-wake function, the H3LIS331DL breakout makes the perfect board for shock and collision detection as well as impact recognition and logging. This breakout...

SparkFun Triple Axis Accelerometer Breakout - LIS331
OOD!
Price: $21.10
View
Availability: Back Order
Sparkfun Item #: SEN-10345 -

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. All major pins are broken out to 0.1" spaced headers. It also includes two mounting holes as well. The LIS331HH is an ultra low-power full-scale three axis MEMS linear accelerometer. It has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. The device also...

SparkFun Triple Axis Accelerometer Breakout - LIS3DH
OOD!
Price: $9.93
View
Availability: Back Order
Sparkfun Item #: SEN-13963 -

The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF, or 3 Degrees of Freedom. Inertial Measurement Units (or IMUs) can provide additional space location data, such as gyroscopic or magnetometric. The LIS3DH provided on this breakout operates under the same principles but gives a few analog inputs to play with, and it has some...

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q
OOD!
Price: $17.57
View
Availability: Back Order
Sparkfun Item #: SEN-12756 -

This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. The MMA8452Q has user selectable full scales of...

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (Qwiic)
OOD!
Price: $21.10
View
Availability: Back Order
Sparkfun Item #: SEN-14587 -

This breakout board makes it easy to use the tiny MMA8452Q accelerometer communicate over I2C in your project. The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. This version of the SparkFun...

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (with Headers)
OOD!
Price: $18.52
View
Availability: Back Order
Sparkfun Item #: BOB-13926 -

This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart, low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. Due to popular demand, this version of the...

SparkFun Wake on Shake
Price: $39.63
View
Availability: Stocked
Sparkfun Item #: SEN-11447 -

Have you ever wanted your project to just "hibernate" until someone picks it up or moves it? It's a great strategy for dramatically extending the battery life of a widget that doesn't need to be active all the time. The SparkFun Wake-on-Shake board is designed to make it really simple to do just that! The Wake-on-Shake, based on a concept by Nitzan Gadish of Analog Devices, combines the ATTiny2313A with the ADXL362 low-power MEMS accelerometer to cut power to your project for long periods of...

Spectacle Inertia Board
OOD!
Price: $35.22
View
Availability: Back Order
Sparkfun Item #: DEV-13992 -

The Spectacle Inertia Board makes it easy to sense motion or orientation with a Spectacle project. The Spectacle Inertia Board is designed to allow your Spectacle to detect whether it is moving or stationary, or whether it is under acceleration. At the heart of each Inertia Board is the trustworthy ADXL345 triple-axis MEMS accelerometer. The ADXL345 is a perfect fit for your Spectacle project when it comes to all things Inertia! The Inertia Board is equipped with two 3.5mm TRRS jacks for...