Bambu Lab P2S 3D Printer

Item #: BAM-PF004-U-AU

1 review(s).

Price: $1,199.00 inc GST

Retail Price: ##RETAILPRICE## inc GST

Points to Purchase:7994

notify me

Estimate Shipping

About This Item

A next-generation 3D printer designed for high performance and reliability, part of Bambu Lab's P Series lineup.
Advanced Features: Offers enhanced printing capabilities with well-polished hardware and software, suitable for both hobbyists and professionals.
Multi-Series Compatibility: Works seamlessly with accessories like AMS 2 Pro for multi-material and multi-color printing. (AMS 2 Pro NOT Included)
Part of a Diverse Product Range: Listed alongside other Bambu Lab printers such as the H2S, H2D, A1, and X1C, showcasing its place in a comprehensive ecosystem of desktop 3D printing solutions.
NOTE: If P2S standalone needs to connect to any AMS (including AMS1/AMS2), an additional buffer SA011 must be purchased, otherwise it cannot be used.The P2S Combo comes with a SA011 buffer, but an additional purchase is required for P2S standalone use.

Description

Featured

Bambu Lab P2S 3D Printer

THE USER

The User Experience As Good As A Smartphone

The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.5-inch Touch Screen ｜ 2nd-Gen UI

70% MORE

70% More Extrusion Force & Real-Time Error Detection

The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.PMSM Servo Architecture ｜ DynaSense Extruder

PRINT SMOOTH

Print Smooth At Every Corner, Always

The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.Active Flowrate Compensation ｜ Eddy Current Pressure Sensor

PERFECT OVERHANG

Perfect Overhang No Matter the Filament or Temperature

Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.Cold-Air Intake ｜ Cooling Mode

50°C CHAMBER

50°C Chamber Ready For Engineering-Grade Filaments

The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.Heat Preservation ｜ Carbon Filter

PEACE OF MIND,

Peace Of Mind, Everytime You Print

The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.AI Error Detection ｜ 2 TOPS NPU

Start Check

30-SECOND NOZZLE

30-Second Nozzle Swap

The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.Quick Swap Hotend ｜ 1-Clip Design

NO-LAG LIVEVIEW

No-Lag Liveview & High-Quality Timelapse

Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media."Stage" Lighting ｜ 1080P High-Rate Camera

RELIABLE FOR FIBER-REINFORCED

Reliable for Fiber-Reinforced Material Printing

P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.Hardened Steel Nozzle ｜ Hardened Steel Extruder Gear

MAKERWORLD

Makerworld

Over a Million Models at Your Fingertips

MAKERLAB

Makerlab

AI Assisted 3D Modeling Tools, Bring Your Vision to Life

MAKER'S SUPPLY

Maker's Supply

Go-To Source for Parts that Bring 3D Prints to Life

PERFECTION, DETAIL

Perfection, Detail by Detail

Shatter-Safe Front Glass

The P2S features numerous refinements that enhance the user experience. While these incremental improvements may not be immediately apparent, they embody the level of perfection Bambu Lab constantly pursues.

Effortlessly switch between your AMS and external filament spools for maximum flexibility.

Specifications

P2S

Specification	Details
Printing Technology	Fused Deposition Modeling
Build Volume (W×D×H)	256×256×256 mm³
Chassis	Plastic and Steel
Outer Frame	Plastic and Glass
Physical Dimensions	392×406×478 mm³
Net Weight	14.9 kg
Extruder Gear	Hardened Steel
Nozzle	Hardened Steel
Max Nozzle Temperature	300 °C
Included Nozzle Diameter	0.4 mm
Supported Nozzle Diameter	0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter	Built-in
Filament Diameter	1.75 mm
Extruder Motor	Bambu Lab High-precision Permanent Magnet Synchronous Motor
Build Plate Material	Flexible Steel Plate
Included Build Plate Type	Textured PEI Plate
Supported Build Plate Type	Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
Max Heatbed Temperature	110 ℃
Max Speed of Toolhead	600 mm/s
Max Acceleration of Toolhead	20,000 mm/s²
Max Flow for Hotend	40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
Activated Carbon Filter Type	Granulated Coconut Shell
VOC Filtration	Supported
Particulate Matter Filtration	Supported
Part Cooling Fan	Closed Loop Control
Cooling Fan for Hotend	Closed Loop Control
Auxiliary Part Cooling Fan	Closed Loop Control
Filament Supported	PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
Camera	Built-in; 1920×1080; 30 fps HD
Door Sensor	Supported
Filament Run Out Sensor	Supported
Filament Tangle Sensor	Supported
Filament Odometry	Supported with AMS
Power Loss Recovery	Supported
Voltage	100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power	1200 W@220 V / 1000 W@110 V
PLA Steady-State Power	200 W@220 V / 200 W@110 V（PLA printing）
Working Temperature	10 °C–30 °C
Touchscreen	5-inch 854×480 Touchscreen
Storage	Built-in 8 GB EMMC and USB Port
Control Interface	Touchscreen, mobile App, PC App
Motion Controller	Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor	Quad-core 1.5 GHz ARM A7
Neural Processing Unit	2 TOPS
Slicer	Bambu Studio
Third-party Slicer Support	Supports Super Slicer, PrusaSlicer and Cura (some advanced features may not be supported)
Supported Operating System	MacOS, Windows, Linux
Ethernet	Not Available
Wireless Network	Dual-Band Wi-Fi
Network Kill Switch	Not Available
Removable Network Module	Not Available
802.1X Network Access Control	Not Available
Wi-Fi Operating Frequency	2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE); 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP)	2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC); 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC); 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC); 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol	IEEE 802.11 a/b/g/n
Note	* To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes.

Additional Information

Frequently Asked Questions - Bambu Lab P2S 3D Printer

Question	Answer
1. What materials are the P2S pre-installed extruder gears and nozzle made of?	Hardened steel.
2. Does the P2S require an external power supply to use the dry filament function when connected to the AMS 2 Pro?	You can use the AMS 2 Pro's drying function while the entire machine is in standby, though printing-related functions will be paused during drying. If you need to dry filament while printing, you'll need to purchase a Bambu Lab official power adapter to power the AMS 2 Pro.
3. Are the P2S buildplate and the X, P, A, series buildplates compatible?	The P2S buildplate's recognition function has been optimized. Older build plates do not support the type recognition feature, but their external dimensions are consistent, so they can still be used for printing.
4. The left side of the P2S has some mounting points. Does it support installing an auxiliary part cooling fan?	You can purchase an official auxiliary cooling fan for upgrading.
5. Can the P2S use the nozzle of A1 and H2D?	It's compatible with H2D nozzles but not with A1 nozzles.
6. How many AMS units can the P2S connect to at most?	It supports connecting to 4 AMS 2 Pro units and 4 AMS HT units, totaling 8 AMS units with 20 slots. This means it supports up to 20-color printing.
7. Does the P2S support chamber temperature control, and how is the temperature controlled?	The P2S does not have an active chamber heating function, but it can regulate chamber temperature through its enclosed chamber and automatic switching flap between internal and external circulation.
8. Why did the P2S stop using carbon rods?	To allow for easier maintenance. Dirt residual is much simpler to clean off the surface of a smooth rod.
9. Will the P1S stop being sold?	There are no plans for that at the moment. Please stay tuned for official announcements.

What's in the Box

Bambu Lab P2S 3D Printer
Buildplate
Accessory Box
Spool Holder

Reviews

Matthewryaio

Effortless

Easy to setup, easy to use, easy support. As an amateur, I want something simple and reliable with minimal tinkering required. The P2S has exceeded my expectations at every turn. I've done about 200 hours of printing at this point and I've had zero issues. Spend that little bit more and get this, or get the AMS version if you want it to automatically swap colours.

Reviewed in on 1/13/2026

5.00

Out of 5

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!