RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through Bambu Lab's AMS (Automatic Material System).
Load and print — no more tedious setting steps. Your printer automatically configures nozzle temperature, bed temperature, and speed the moment you insert the spool.
Printing Tips
• Bambu PLA Basic is extremely easy to print — great for beginners and high-volume printing alike.
• Use the Cool Plate or Bambu Engineering Plate with a thin layer of liquid glue for best first-layer adhesion.
• PLA is hygroscopic. If you notice poor surface finish or under-extrusion, dry at 50°C for 8 hours before printing.
• Store in a sealed bag with desiccant between uses. Target humidity below 35% RH.
• PLA Basic is biodegradable and plant-based — suitable for makers who prioritise sustainability.
• Not suitable for high-temperature applications — PLA softens above 60°C.
Recommended Printing Settings
| Nozzle Temperature | 190 – 230°C |
|---|
| Bed Temperature | 35 – 45°C |
|---|
| Max Print Speed | 258 mm/s |
|---|
| Drying Settings (Blast Oven) | 50°C for 8h |
|---|
| Drying Settings (Printer Heatbed) | 65°C for 8h |
|---|
| Storage Humidity | < 35% RH (sealed, with desiccant) |
|---|