• Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU
  • Bambu Lab X1-Carbon Combo  - BAM-PF001-P+SA001-AU

Bambu Lab X1-Carbon Combo

Item #: BAM-PF001-P+SA001-AU
Price: $3,050.00 inc GST
Retail: $3,250.00
    You Save: $200.00 (6.2%)
    The product is in stock Availability: Back Order
    Usually ships In Backorder - ETA on Product Page


    About This Item

    MindKits, Official New Zealand Bambu Lab Stockists

    -Local support
    -Local parts
    -Electrically certified for NZ when bought from MindKits
    -Bambu Support will service customers with printers bought from MindKits

    -Be wary of X1 Carbon Combo bought from other NZ Suppliers as Chinese domestic stock and reshipped to NZ. These are not supported by Bambu Lab.

    Bambu Lab X1 Carbon Combo 3D Printer

    What to expect from the X1 Series

    • 20 m/s² Acceleration
    • Micro Lidar Assisted Bed Levelling
    • Active Vibration Compensation for Better Print Quality
    • Spaghetti Failure Detection and Auto-Pause
    • Print Resume After Power Outage

    Pricing - Are you charging more than Bambu Labs Direct?

    Definitely not - Did you remember to add GST and shipping to your comparison? Imports of this value will get hit with GST at the border (plus a clearance fee) which can come as a surprise. We adjust our price based on the USD/NZD exchange at the time we order stock so sometimes it goes up and sometimes it comes down.

    Bambu Lab X1 Carbon Combo 3D Printer

    ​Colours​ ​and ​Beyond:

      Colo​u​r, the ultimate expression of emotions, is brought to you by Bambu Lab’s Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials, a 3D Printing Maestro.

      Able to Print Abrasive Filament

      The Bambu Lab X1 Carbon edition comes with a hardened steel extruder and is able to print abrasive filaments such as carbon fibre.

      Supports Easy Remove:

      Bambu Lab X1 can use snap-away support material or dissolvable filament to minimize the pain of removing support.

      Advanced Processes Enable Advanced Materials:

      Breaking free from low temperature and easy print PLA and PETG, the X1 unlocks more demanding material by utilizing advanced parts and sophisticated thermal control.

      A Lidar that measures depth in micrometers:

      Bambu Micro Lidar brings micrometer-level precision into 3D printing. The system probes the nozzle height calibrates the flow, and scans the first layer, so the possibilities are endless.

      Dual automated bed leveling for doubly guaranteed prints:

      Bambu Lab X1 utilizes two sets of independent sensors and an algorithm to measure the height of the nozzle relative to the bed. The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling.

      AI inspected the first layer:

      Tired of waiting out that first layer? Bambu Lab X1 has got your back. The lidar sensor can check your first layer so that you can get back to doing…anything else.

      Spaghetti detection:

      Our AI keeps an eye out for Spaghetti monsters, so you can sleep easy in the knowledge that your printer is safe from this scourge.


      By the way, Bambu Lab X1 can now cut print time in half while keeping layer height at 0.1 mm.

      Easy to Print:

      The X1 is assembled, tuned, calibrated, and tested before being shipped to you, so you can enjoy printing right out of the box. You can send prints by Bambu Studio​, ​and you can control your printer anytime anywhere with Bambu Handy,​ ​also support SD card and local network to print the projects


      80% Cut in Carbon Footprint

      20% Plastic Saved

      50dB: In Silent Mode

      VOCs Filter: Activated Carbon Filter Absorbs VOCs

      Watch an 18 minute benchy on the P1P

      review-star review-star review-star review-star review-star

      Great product would highly recommend best in class

      Normally would give it 5 stars , but a for a few things were unexpected out of the box ,and some problems with PLA

      - The easiest printer to run out of the box with in 30 minutes
      - Great speed and quality with out much hustle
      - Multicolor/Multi material is definitely the best in the class
      - Better than Prusa, Ender, Davinci , Snapmaker
      - Qualify is comparable with Prusa, but with in 1 hour of opening the box and tests ,while Prusa i3 mk3s can get the same quality after hours of tunning,not counting assembly) and Bambu is almost twice as fast with out mucking around.
      - eASA -(eSun 3d eASA) print from the first time with no issues or special tunning( prints better than PLA at the moment) . Encloser and stable temperature helps
      - As a whole package is probably one of the best printers i have seen with-in the price range
      - With in first 10ish hours made 6 out of 8 good prints at very good speed
      - Networked out of the box no need for additional hardware

      Cons :
      - Out of the box the vertical laser did not work needed Firmware upgrade
      - Out of the box not well leveled plate - auto levelling compensates , but causes constant movement of the base plate for the same layer
      - Strange PLA both bambu PLA and eSun Pla+ have issues especially on the first layer(worked around at 50% speed the first few layers) , eASA works actually better than PLA at 100% speed and that is for first. Could be related to the Cold plate and not very well levelled base , while ASA is at high temperature plate . The same problem with the internal provided PLA models
      - Watching the live print on the Bambu studio uses Internet even in the same LAN , not sure why(possible Port) . But watching on the Mobile does not use Internet only local traffic strange both connected to the same Lan , one is WiFI other is ethernet, but different applications. Locally should not use the cloud for video
      - Slicer is missing some of the new features and profiles from Prusa 2.6 but simpler to work with

      Overall : Definitely worth the money and saves time and the easiest printer in my experience. i spend probably over 100 hour per printer tunning , just to print a 5 hour high quality model . Bambu first impressions has a good quality from the first print , Ultimaker pro is a lot more expensive and would love to try one. Prusa usually give very good quality , but ASA,PETG can be a bit of an issue without a box and practically no multicolor. And can be a lot more effort when it goes wrong or high quality or speed is needed

      Would love to compare it with the Prusa Revo 0.6mm , need to get 0.6mm for this one
      Reviewed in    on

      review-star review-star review-star review-star review-star

      Best printer we own.

      Tim was great at giving feedback on what to expect from this printer before we purchased it, and it has exceeded our expectations. This 3d printer is amazing, the quality out of the box is great and it is very fast. I think my prusa mk3 and Voron 2.4 are going to be made redundant and will likely get replaced with more of these in the future.
      Reviewed Dunedin in    on

      Out of 5