Bambu Lab - PLA Basic Pink with Bambu Reusable Spool - 1KG

Item #: BAM-A00-P1-1.75-1000-SPL
Bin:
There are no reviews yet Write a review
Price: $40.00 inc GST
Retail: $53.20
    You Save: $13.20 (24.8%)
    The product is in stock Availability: Stocked-NoBackOrder
    Usually ships In 2-4 days
    Stocked-NoBackOrder Quantity: 4

    Quantity:

    RFID for Intelligent Printing

    All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

    Load and print! No more tedious setting steps.

    图片加载失败文案

    Recommended Printing Settings
    Drying Settings before Printing55 °C,8 h
    Printing and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)
    Nozzle Temperature190 - 230 °C
    Bed Temperature (with PVP Glue)35 - 45 °C
    Printing Speed< 300 mm/s

    Physical Properties
    Density1.24 g/cm³
    Vicat Softening Temperature57 °C
    Heat Deflection Temperature57 °C
    Melting Temperature160 °C
    Melt Index42.4 ± 3.5 g/10 min

    Mechanical Properties
    Tensile Strength39 ± 2 MPa
    Breaking Elongation Rate12.2 ± 0.4 %
    Bending Modulus2750 ± 60 MPa
    Bending Strength76 ± 3 MPa
    Impact Strength26.6 ± 2.8 kJ/m²

    Download Filament TDS

    What's in the Box:

    pla basic

    Filament*1 & Desiccant*1

    pla basic

    Instructions*1 & Spool Sticker*1

    pla basic

    Package*1

    pla basic

    Filament Label*1

    图片加载失败文案

    Print Your Own Spool Now

    Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

    图片加载失败文案

    2.If you don't have the spool model in your printer,please click here to download.

    Instructions for Printed Spool

    abs filament

    When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

    abs filament

    Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

    abs filament

    Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

    Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

    abs filament

    Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

    Step 2. Tear apart and pull out the plastic strips.

    Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.