Products 1-13 of 13
Show
2-Channels Opto Sensor
Price: $9.68
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-SPS21211S -

Description This 2-Channels Opto Sensor is consist of 3 parts: 2 opto-emitters and receivers, one PCBA to adjust the sensitivity and map out the signal. With this sensor, you can measure if there are the objects in the measuring range, eapacilly useful in applications that you need to monitor the inputs&outputs of a system. When the opto sensor didn't covered , the D0 output logic LOW, the signal indicate LED light, when the opto sensor covered, the D0 output logic HIGH and the LED off,...

CMOS Camera Module - 728x488
Price: $55.56
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-11745 -

"This is a high-quality color CMOS camera module. Power the CM-32 module, hook up any display, monitor, or LCD screen with an RCA input and get vivid color video at 728x488 resolution. Module is easily mountable and has a wide operating voltage (6V to 20V). Comes with high quality optics, all the on board circuitry to output RCA signal, and cable harness. Features: 728 x 488 Resolution 6V to 20V input 50mA (at 12V) Documents: Datasheet " ...

Digital Light Sensor - BH1750FVI
Price: $5.01
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-SLS01011S -

    This is a BH1750FVI light intensity sensor module with built-in a 16 bit AD converter generating digital signal. The data from this module is light intensity in lx (lux meter). It communicate with micro-controller board through I2C bus. Features working Voltage: 3.3V~6V I2C bus Interface with 2 alternative address (f/s Mode Support) Spectral responsibility is approximately human eye response Wide range and High resolution (1 ~ 65535 lx) Light source dependency is...

Dot Laser Emitter
Price: $4.62
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TEL2565L -

Such a little Laser emitter module is popular used in teaching, horizontal measurement and so on, the laser effective transmission distance can be upto 1km when drive current is 20 mA There are also laser emitters with cross spot or line sport.SpecificationDiameter: 9mmWavelength: 650nm Max power: 50 mW Life: >1,000 hCurrent&Voltage: 20mA@3VSpot: Dot , Φ10mm~Φ15 mm @ 15M ...

Gravity: 27 Pcs Sensor Kit for Arduino
OOD!
Price: $129.29
View
Availability: Back Order
DFRobot Item #: KIT0011 -

If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors such as light sensors, gas sensors, sound sensors, touch sensors, distance sensor, accelerometer and lots more which gives unlimited possibility to sense the physical world on your embedded devices. The wiki for these sensors and devices makes it easy to start learning. So save by purchasing them together and start...

Gravity: Analog Adjustable Infrared Proximity Sensor
OOD!
Price: $11.89
View
Availability: Back Order
DFRobot Item #: SEN0019 -

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun's natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on it's sight is not adviced. It's incredibly repurposable and can be used for a lot of different projects. The...

Gravity: Analog Flame Sensor For Arduino
OOD!
Price: $6.90
View
Availability: Back Order
DFRobot Item #: DFR0076 -

This Arduino flame sensor can be used to detect fire or other wavelength at 760 nm ~ 1100 nm light. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source or football. It can make use of fire-fighting robots, soccer robots. The Flame sensor has probe angle of 60 degrees, two M3 mounting holes is provided to install on various platforms. This arduino flame sensor's operating temperature is -25 degrees Celsius to...

Gravity: Digital Infrared Motion Sensor For Arduino
OOD!
Price: $7.58
View
Availability: Back Order
DFRobot Item #: SEN0018 -

This is a simple to use arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This sensor checks for infrared heat in it's detecting angle. Human body, pets and several other things emit energy that the sensor is looking for, it compares with the snapshot and if there is a recent change it triggers.Get on with your Home alarm security audit gear and experiment with this...

Gravity:DIGITAL IR Transmitter Module
OOD!
Price: $6.72
View
Availability: Back Order
DFRobot Item #: DFR0095 -

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving device detects the light with a photo diode and converts it to an electrical signal which, via an integrated circuit, controls its...

Gravity:Digital Line Tracking(Following) Sensor For Arduino
OOD!
Price: $8.45
View
Availability: Stocked
DFRobot Item #: SEN0017 -

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sensor in the market.Line following is the most basic function of smart mobile robot. As you can see line tracking robot one of the easiest ways for a robot to successfully and accurately navigate. We designed this new generation of line tracking sensor to be your robot's powerful copilot all the...

Infrared Distance Sensor Bracket
OOD!
Price: $2.24
View
Availability: Back Order
DFRobot Item #: FIT0032 -

Introductiona|This bracket is designed for Gravity: Arduino Adjustable Infrared Distance Sensor which can be used for the obstacle avoidance or objection detection. It provides a easy installation of sensor on various robot platforms or other interactive media devices.?|Specification| Probe diameter: 18mm (0.7 in)|ShippingList| Bracket x1 Screw sets x3 ...

LinkSprite JPEG Color Camera TTL Interface - 2MP
Price: $100.34
View
Availability: Back Order
Sparkfun Item #: SEN-12804 -

"Every super spy has a small compact camera at their disposal just to get the advantage on the bad guy and though you may not be a “00” this high res TTL camera still has plenty of uses! LinkSprite’s latest JPEG Color camera module can capture high resolution pictures and transport them over TTL serial, making it perfect for embedded applications. This a very simple camera module with great user applications and can be incorporated into almost any project with ease. Each one...

TCS3200 RGB Color Sensor For Arduino
OOD!
Price: $13.62
View
Availability: Back Order
DFRobot Item #: SEN0101 -

This is an Arduino RGB Color Sensor breakout uses TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 arduino color sensor can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. The TCS3200 has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly...