Ultimaker 3D printers - Ultimaker are the pinnacle of 3d Printer technology and come to you after thousands of hours of research and development from the Ultimaker team.

Products 241-288 of 352
Show
Timing Belt GT2 200
Price: $4.45
View
Availability: Stocked
Ultimaker Item #: UM-1758 -

This belt is also known as the short belt for Ultimaker.It is compatible with the Ultimaker2, Ultimaker 2 Extended, Ultimaker 2+ and the Ultimaker 2+ Extended. You need 2 of these for a complete Ultimaker 2 assembly.

Timing Belt GT2 610
Price: $9.88
View
Availability: Stocked
Ultimaker Item #: UM-1189 -

Timing Belt GT2 610 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Timing Pulley 5mm shaft
Price: $14.82
View
Availability: Stocked
Ultimaker Item #: UM-1084 -

Timing Pulley 5mm shaft For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Timing Pulley 8mm shaft
Price: $10.27
View
Availability: Stocked
Ultimaker Item #: UM-1088 -

Timing Pulley 8mm shaft For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Top Panel UM2 / UM2 Xtnd
Price: $59.27
View
Availability: Back Order
Ultimaker Item #: UM-1235 -

Top Panel UM2 / UM2 Xtnd For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Training Session (1 hour)
Price: $172.50
View
Availability: Stocked
MK-Misc Item #: MK-UMTRA1 -

Ultimaker/Snapmaker/Flux Training Session (1 hour via Skype/Facetime/Onsite) So you have brought a brand new shiny printer or lasercutter and you can't wait to get started. Sometimes those manuals can take forever to read, or just be plain boring. Engineering expert, Jason can run a one hour session via Skype/Facetime and get you up to speed on setup, troubleshooting, software and making the most of your new purchase. Jason will cover off the below in this one hour session via Skype/Facetime...

Training Session (2 hour via Skype/Facetime/Onsite)
Price: $345.00
View
Availability: Stocked
MK-Misc Item #: MK-UMTRA2 -

So you have brought a brand new shiny printer and you can't wait to get started. Sometimes those manuals can take forever to read, or just be plain boring.Ultimaker Engineering expert, Jason can come out and get you up to speed on setup, troubleshooting, cura and making the most of your printer, all run in a hands on two hour session.He can do a set up installation for you if you haven't take it out of the box. Or if you would just like an up skill session which Jason can cover offUltimaker...

Trapezoidal Lead Screw
Price: $98.78
View
Availability: Stocked
Ultimaker Item #: UM-1043 -

Trapezoidal Lead Screw For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Tube coupling collet
Price: $2.47
View
Availability: Stocked
Ultimaker Item #: UM-1069 -

This is the tube coupling collet for your Ultimaker family. This is what your Bowden Tube feeds into.This part is compatible with the following machines - Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2 Extended+, Ultimaker Original, Ultimaker Original+ and the Ultimaker 2 Go

Ultimaker 2+ 3D Printer Demo Shipping
Price: $57.50
View
Availability: Stocked
MK-Misc Item #: MK-DEMO -

Shipping costs of the Ultimaker 2+ 3D Printer Demo machine (freight charge is for both to your school and return)

Ultimaker ABS Black 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1621 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Blue 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Out of Stock
Ultimaker Item #: UM-1624 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Gray 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1630 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Green 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1627 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Orange 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1628 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Pearl Gold 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Out of Stock
Ultimaker Item #: UM-1626 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Red 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1623 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Silver 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Out of Stock
Ultimaker Item #: UM-1625 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS White 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1622 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker ABS Yellow 750g Spool - 2.85mm (3.0mm Compatible)
Price: $73.34
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1629 -

Tougher than PLA Acrylonitrile Butadiene Styrene (ABS), is the same material from which Lego bricks are made. Surfaces printed in Ultimaker ABS will have a matte finish. Other materials like CPE and XT have much higher chemical resistance, whereas ABS excels at maintaining its strength at higher temperatures. As such it is known for its exceptional mechanical properties and used by an array of industries worldwide.Specifically formulated to minimise warping and ensure consistent interlayer...

Ultimaker Black PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-227282 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Blue PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-227333 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Breakaway Material  750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-200551 -

Ultimaker Breakaway material Ultimaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on your 3D print. Designed for a hassle-free 3D printing experience, Breakaway provides good adhesion to ABS, PLA, Nylon, CPE, or CPE+. Technical and safety data sheets can be found here. Reasons to choose Ultimaker Breakaway No sanding or waiting for your support material to dissolve. Simply...

Ultimaker Cleaning Filament - 2.85mm (3.0mm Compatible)
Price: $29.18
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-2297 -

Using the Ultimaker 3 cleaning filament is the most effective way to unclog and keep print cores in optimal condition.When to use the Ultimaker 3 cleaning filamentThe Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes.How to use the Ultimaker 3 cleaning filamentThis filament can be...

Ultimaker CPE Black 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Out of Stock
Ultimaker Item #: UM-1631 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Blue 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1636 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Dark Gray 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1634 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Green 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1638 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Light Gray 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1633 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Red 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1635 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Transparent 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1639 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE White 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1632 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE Yellow 750g Spool - 2.85mm (3.0mm Compatible)
Price: $88.55
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1637 -

Good Dimensional Stability CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPEProduct designers use CPE to make extremely tough and dimensionally stable functional...

Ultimaker CPE+ TR Black 700g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1644 -

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is...

Ultimaker CPE+ TR Transparent 700g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1643 -

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is...

Ultimaker CPE+ TR White 700g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1645 -

CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. Reasons to choose Ultimaker CPE+ Product designers use CPE+ to make extremely tough and dimensionally stable functional prototypes. CPE is available in...

Ultimaker Flourescent Yellow PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-227342 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Green PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-227330 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Grey PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-227329 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker Material Station
Price: $5,405.00
View
Availability: Stocked
Ultimaker Item #: UltimakerMaterial -

Material Station Seamlessly integrating with the Ultimaker S5, the Material Station redefines filament storage and delivery, unlocking truly 24/7 dual extrusion. Inside the humidity-controlled chamber, six material spools can be loaded in any order with up to 4.5 kg of material. Each bay features automatic material switching, composite-ready feeder wheels, and filament flow sensors. Now you can achieve increased productivity, easier operation, and higher-quality production. Simplify your 3D...

Ultimaker Orange PETG Filament- 2.85mm (3.0mm Compatible)
Price: $74.75
View
Availability: Out of Stock
Ultimaker Item #: UM-227343 -

EXCELLENT COLOUR SELECTION AND SUPERB PERFORMANCE WITH ULTIMAKER PETG Ultimaker PETG is an ideal material for creating end-use parts, functional prototypes, or manufacturing aids that establish safety and organisation in complex, industrial settings, while holding up to those often-severe environments. And because Ultimaker 3D printers are already equipped with state of the art printing profiles for Ultimaker PETG, you, your school, or your company can be up and printing this phenomenal...

Ultimaker PA Black 750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1646 -

Abrasion resistant and Durable Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability to withstand significant mechanical stress makes it a great choice for 3D printing tools, functional prototypes, and end-use parts. From toys to aerospace components, Nylon is embraced by engineers and manufacturers worldwide for an array of applications that require...

Ultimaker PA Transparent 750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
review-star review-star review-star review-star review-star
(1)
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1647 -

Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability to withstand significant mechanical stress makes it a great choice for 3D printing tools, functional prototypes, and end-use parts. Reasons to choose Ultimaker NylonIndustrial-grade impact and abrasion resistanceDurableHigh strength-to-weight ratioLow friction coefficientGood corrosion resistance to...

Ultimaker PCA Black 750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1641 -

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing.Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments.High...

Ultimaker PCA Transparent 750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1640 -

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing. Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments. High...

Ultimaker PCA White 750g Spool - 2.85mm (3.0mm Compatible)
Price: $114.94
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1642 -

With Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 _C. Our PC is a perfect filament for printing molds, tools, functional prototypes and parts for short-run manufacturing. Reasons to choose Ultimaker PCPC is a top choice material for engineers and manufacturers who require parts that need to retain its strength, toughness and shape while operating in high-temperature environments. High...

Ultimaker PLA Black 750g Spool - 2.85mm (3.0mm Compatible)
Price: $70.15
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1609 -

Easy-to-Use, Remarkable Quality, & Good to Mother Earth Ultimaker PLA (polylactic acid) filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Our PLA is made from organic and renewable sources, and because it's plant-based, non-toxic and biodegradable.it's safe, easy to print with and it serves a wide range of applications for both novice and advanced users.Reasons to choose Ultimaker PLAPLA is the preferred choice for primary and secondary...

Ultimaker PLA Blue 750g Spool - 2.85mm (3.0mm Compatible)
Price: $70.15
View
Availability: Stocked-NoBackOrder
Ultimaker Item #: UM-1616 -

Easy-to-Use, Remarkable Quality, & Good to Mother Earth Ultimaker PLA (polylactic acid) filament provides a no-hassle 3D printing experience thanks to its reliability and good surface quality. Our PLA is made from organic and renewable sources, and because it's plant-based, non-toxic and biodegradable.it's safe, easy to print with and it serves a wide range of applications for both novice and advanced users.Reasons to choose Ultimaker PLAPLA is the preferred choice for primary and secondary...