The Education, 3D Printing and Electronics Specialists. So you're looking for somewhere to buy electronics that offers great pricing, amazing support and lightning fast delivery?

Products 1-33 of 33
Show
Chapman Pocket Screwdriver Set
OOD!
Price: $22.65
View
Availability: Back Order
Sparkfun Item #: TOL-14190 -

"The Chapman Pocket Screwdriver Set is a unique addition to the screwdriver family, as it utilizes a ¼" ratchet, similar to one found on a socket wrench, as well as four custom-built drive bits. This pocket screwdriver is aptly named for its size — not only fitting in your pocket but also fitting into tight spaces where a normal-sized screwdriver would not be able to fit. Moreover, to change the direction you need the screw to go, just flip the pocket screwdriver over! The two...

Crimping Pliers - 28-20 AWG
OOD!
Price: $48.23
View
Availability: Back Order
Sparkfun Item #: TOL-13193 -

"These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. We really like the quality and sturdiness of these crimp pliers. These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and 28-20 AWG wires together. All you need to do is press the handles together with enough force and the pliers will release, once this happens you know your crimping is done! These work well with JST PH, SH, SHL, and ZH series pins. Documents:...

Diagonal Cutters
Retail: $4.50
Price: $3.25
View
Availability: Stocked
Sparkfun Item #: TOL-08794 -

"Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long."

Digital LED Voltmeter
OOD!
Price: $2.42
View
Availability: Back Order
Sparkfun Item #: PRT-14313 -

"This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its three 7-segment LEDs. This voltmeter is able to provide a readout of voltages from 2.5VDC to 30VDC within a 1% accuracy. Features: Range: 2.5VDC — 30VDC Display: Three 0.28" Red 7-Segment LEDs Refresh Rate: ~1sec Accuracy Within 1% "

Electronic Snippers
OOD!
Price: $24.16
View
Availability: Back Order
Sparkfun Item #: TOL-10447 -

"While our small diagonal cutters are great for hobby use, sometimes you need something with a little more bite. These electronic snippers are great for cutting wires and component leads. They have a cushioned handle which makes them much more comfortable to use. These snippers can be used are wire cutters if the need be, and are great if you’re looking for something a little better than hobby grade."

Flexible Coolant Pipe - 1ft (1/2")
Price: $3.25
View
Availability: Stocked
Sparkfun Item #: TOL-12783 -

"These plastic Flexible Coolant Pipes have been primarily used to spray refrigeration or washing fluid for machine tools but, thanks to their articulation, they can be used in a multitude of different ways as well. We use them as extra arms for our third hand. The coolant pipes are 1ft long with a nozzle diameter of 3.5mm and ½"-20 pipe thread."

Flush Cutters - Hakko
Price: $11.58
View
Availability: Stocked
Sparkfun Item #: TOL-11952 -

"These are our new and improved flush cutters, giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, but if you really need to get up close and personal, flush cutters are the way to go. They have a nice spring-action and a comfy grip. Plus, the color combination of red and black is fetching, I must say. Documents: Product Video " ...

Hex Key - Plas-T-Key T Handle (Straight End, 7/64")
OOD!
Price: $7.97
View
Availability: Back Order
Sparkfun Item #: TOL-14220 -

"This is a T-Handle 7/64" Hex Key from Allen. The Plas-T-Key is Allen’s standard handle and features a plastic grip, which provides durability and extra torque while in use. Each hex key is 2.125" long with a shaft composed of a black oxide-finished, tempered steel alloy that is terminated in a straight end. These hex keys can be used in a variety of ways, including robotics or for the 6-32 screws used by most Actobotics products." ...

Hex Key Set - Metric (Ball End, 9 Pieces)
OOD!
Price: $40.26
View
Availability: Back Order
Sparkfun Item #: TOL-14223 -

"This is a set of nine high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the screw to work in hard-to-reach areas. These specific keys utilize the metric measurement system. These are the go-to hex keys we prefer to use when metric is involved! Each hex key is composed of a black oxide-finished, tempered steel alloy and comes in a noninterference, hinged “caddy” to provide easy access. All hex keys are...

Hex Key Set - SAE (Ball End, 13 Pieces)
OOD!
Price: $32.21
View
Availability: Back Order
Sparkfun Item #: TOL-14222 -

"This is a set of 13 high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the screw to work in hard-to-reach areas. These specific keys utilize the United States customary system (sometimes referred to as Imperial). These wrenches will work for any SAE (Society of Automotive Engineers) parts. Each hex key is composed of a black oxide-finished, tempered steel alloy and comes in a noninterference hinged “caddy”...

Hobby Knife
OOD!
Price: $4.75
View
Availability: Back Order
Sparkfun Item #: TOL-09200 -

"It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap."

Hobby Knife Replacement Blades
OOD!
Price: $3.14
View
Availability: Back Order
Sparkfun Item #: TOL-10325 -

"If you use your hobby knife a lot, chances are you will need extra blades. These #11 blades are very sharp and good for trimming all sorts of things. Each pack comes with 5 blades that work with our hobby knife listed below."

Medium Heatsink
OOD!
Price: $2.52
View
Availability: Back Order
Sparkfun Item #: PRT-14340 -

"This is a medium-sized heatsink that has been designed to dissipate heat away from your boards and ICs. Each of these black anodized heatsinks is perfect when used in conjunction with our ESP32 Thing Power Control Shield, but it also fits the TO-220 package. Documents: Dimensional Drawing "

Monocle Magnifier - Illuminated
OOD!
Price: $16.02
View
Availability: Back Order
Sparkfun Item #: TOL-09316 -

"When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-½". The 1" diameter eye piece fits snugly around your eye with a 15" aluminum-core headband. The LED provides sufficient light at the working distance. This loop magnifier set itself apart in our eyes because of the little LED on the side. Trying to view SMD connections is hard enough -...

Needle Nose Pliers
Retail: $4.50
Price: $2.51
View
Availability: Stocked
Sparkfun Item #: TOL-08793 -

"Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long."

Panavise Jr. - Vacuum Base
OOD!
Price: $54.35
View
Availability: Back Order
Sparkfun Item #: TOL-10410 -

"The Panavise Jr. is a great vise with a vacuum base. Its jaws open up to about 3" and have grooves for PCBs. It’s perfect for light duty field repairs, electronics, hobby and dozens of other projects. This is an exceptionally lightweight, portable vise that firmly attaches to any flat, smooth non-porous surface. A single knob locks the head into position, while a second knob locks the arm at the angle you select."

Pocket Screwdriver Set
Price: $6.58
View
Availability: Stocked
Sparkfun Item #: TOL-12891 -

"What should every hacker have available to them? That’s right, a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you need them. This Pocket Screwdriver Set provides you with just that service in a small, portable package. Each Pocket Screwdriver Set offers 7 different chrome vanadium bits, four flathead options and three Phillips head options, that fit...

Polymorph - 1000g
OOD!
Price: $56.28
View
Availability: Back Order
Sparkfun Item #: TOL-10951 -

"Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it becomes a nylon-like white plastic. Polymorph can be re-used by simply re-heating and re-shaping. Plastic beads are supplied in a re-usable plastic container. So what do you do with it? Robotics,...

Polymorph - 250g
Price: $16.42
View
Availability: Stocked
Sparkfun Item #: TOL-10950 -

"Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it becomes a nylon-like white plastic. Polymorph can be re-used by simply re-heating and re-shaping. Plastic beads are supplied in a heat-sealed plastic bag to prevent spillage during transport. So what do you...

Resistor Lead Bending Tool
OOD!
Price: $7.73
View
Availability: Back Order
Sparkfun Item #: TOL-13114 -

"This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with an easy and reliable way to get the exact distance between two resistor leads that you need to PTH soldering. The Resistor Lead Bending Tool is two-sided, with one side offering 0.4"-1.5" spacing for ¼ Watt resistors and the other side offering 0.5"-1.5" spacing for ½ Watt resistors. We here at SparkFun use a lot of...

SMD Tweezers - 45 Angle
OOD!
Price: $46.30
View
Availability: Back Order
Sparkfun Item #: TOL-14224 -

"These unique tweezers have been specially designed to be used with vertical applications of SMD ICs. The tips of these tweezers have tiny prongs been bent to a 45° angle to facilitate access to confined spaces and provide excellent visibility of the area to be worked on. Whether you are moving tiny SMD ICs or soldering them onto a PCB, these tweezers should be your go-to choice to help! Each set of tweezers is made from stainless steel that is nonmagnetic, nonrusting, acid-proof and...

Solder Vacuum
Price: $8.17
View
Availability: Stocked
Sparkfun Item #: TOL-13203 -

"The Solder Vacuum, a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The piston pops up and the solder disappears! This solder vacuum has a black metal body with a hard plastic nozzle and buttons."

SparkFun Mini Screwdriver
Price: $1.58
View
Availability: Stocked
Sparkfun Item #: TOL-09146 -

"This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo."

SparkFun S.H.O.V.E.L.
OOD!
Price: $16.02
View
Availability: Back Order
Sparkfun Item #: TOL-11763 -

"Introducing the Semi-Horned Oblong Versatile Eating Ladle, or as we like to call it, the S.H.O.V.E.L. This is not your run-of-the-mill spork (foon), ladies and gentlemen! It also has a serrated knife, a bottle cap opener, and six feet of red paracord to wrap around its sturdy titanium body. Here’s the best part: it’s open-sourced. (No, we aren’t joking.) We want to show the world that OSHW is not just circuits and PCBs. The idea of open source can be applied to just about...

SparkFun Third Hand Kit
Price: $49.92
View
Availability: Stocked
Sparkfun Item #: TOL-11784 -

"Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board between two alligator clips on two flexible arms with multiple points of articulation. The arm’s wide range of articulation gives you access to any angle of the board that you are currently working on, making soldering that much easier. The SparkFun Third Hand also won’t move around while you work thanks to a heavy aluminum base supporting the arms....

SparkFun Third Hand Parts
Price: $3.16
View
Availability: Stocked
Sparkfun Item #: TOL-12033 -

"This parts kit allows you to modify a coolant hose into an additional hand for your SparkFun Third Hand. It includes the alligator clips and hardware necessary to repair a broken hand, or make a new one. Note: A portion of this sale is given to Ryan for inspiring the design with his Instructable. Includes: 2x Alligator Clips 2x 1" 6-32 Phillips Pan Head Machine Screws 2x 50 x 4mm Heat Shrink Wraps " ...

Thermal Gap Filler
OOD!
Price: $16.10
View
Availability: Back Order
Sparkfun Item #: TOL-14283 -

"This Thermal Gap Filler provides 1.1W/mK of thermal conductivity that can conform to most surfaces. It’s perfect for high-value products that you need to keep cool, as it is a poor conductor of electricity while remaining a great conductor of heat! No additional adhesive is required when applying the Thermal Gap Filler, as it is naturally tacky and sticks to whatever you need it to — just be sure that’s where you need it! This gap filler is what we use on our Stepoko motion...

Third Hand
OOD!
Price: $16.02
View
Availability: Back Order
Sparkfun Item #: TOL-09317 -

"This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but soldering flat on a table works just fine. Then again, the desk is starting to look like a mine field of burn marks and melted pot holes. What we’ve found with many of these cheaper third hand is the lack of stability. The small base on this unit does not make...

Tweezers - Curved (cross-lock, ESD Safe)
Price: $6.58
View
Availability: Stocked
Sparkfun Item #: TOL-12572 -

"These are nice, cross-locking, curved tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you’re working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components. Documents: Product Video " ...

Tweezers - Straight (cross-lock, ESD Safe)
Price: $6.58
View
Availability: Stocked
Sparkfun Item #: TOL-12573 -

"These are nice, cross-locking, straight tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you’re working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components. Documents: Product Video " ...

Wire Strippers - 30AWG (Hakko)
Price: $16.58
View
Availability: Stocked
Sparkfun Item #: TOL-12630 -

"These are extremely handy and comfortable to use wire strippers from Hakko. These are an essential part to any hacker’s arsenal and are able to strip 30AWG wire wrap wire nicely as well as the standard 22AWG hook up wire. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 mm settings Documents: Product Video " ...

Xcelite 8-in-1 Screwdriver Set
OOD!
Price: $46.30
View
Availability: Back Order
Sparkfun Item #: TOL-14235 -

"The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren’t currently using. Though the screwdriver set includes eight unique bits, the end of the shaft features a 0.25" hex driver that can fit most of your existing ¼" bits. With a strong magnetic hold and no-roll handle design, this is one of the best all-in-one tools we have used!...

Xcelite Ergonomic Screwdriver Set (6pcs)
OOD!
Price: $84.55
View
Availability: Back Order
Sparkfun Item #: TOL-14234 -

"The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and handle. Utilizing Xcelite’s own Ergonic® handles, each screwdriver in this set conforms to your hand to provide great comfort and reduce torque loss to provide you with a fantastic slip-resistant tool! The set includes two Phillips head and four flathead screwdrivers. The screwdrivers in this set have been equipped with durable, satin-finished chrome...