Products 49-96 of 230
Show
Digital Storage Oscilloscope - 100MHz (TBS2104)
OOD!
Price: $4,572.07
View
Availability: Back Order
Sparkfun Item #: TOL-14925 -

"The Tektronix TBS2104 Digital Storage Oscilloscope offers a 9-inch WVGA display, 20 million point record length and 1GS/s sample rate. With this oscilloscope you will be able to capture and display significantly more signal to speed up evaluations of designs. On-waveform cursor readouts and 32 automated measurements allow users to easily and confidently analyze signals. The TekVPI® probe interface works with traditional BNC connections, while also enabling wide application coverage with...

DSO Quad - Pocket Digital Oscilloscope (Black)
Price: $490.29
View
Availability: Back Order
Sparkfun Item #: TOL-12065 -

"The Black DSO Quad is an open-source pocket-sized 4-channel digital oscilloscope. It’s based on the ARM cortex M3 32-bit platform, providing 72MS/s sampling rate with integrated FPGA and high speed ADC. The Internal 2MB memory can even store waveforms in various formats which you can transfer to your computer using a mini-USB cable. Note: Check the link below for the most up-to-date firmware. Note: This item may take longer to process due to battery installed in the equipment and...

Electrician Tape - Red
Retail: $1.58
Price: $1.21
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-TET10020T -

Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It is very useful in our daily life.For example,when your wire was bitten by something, it will come in handy.Specifications Material: PVC Adhesive: Nature Rubber, Pressure Sensitive AdhesiveThickness: 0.13mm Width: 18mm Length: 10m Use temperature: 0~80\xb0C MAX use voltage: 600VElongation at break: 150% ~ 220% tensile stress: 2.5-3Kg/cm Features For insulating...

Electronic Snippers
OOD!
Price: $26.00
View
Availability: Back Order
Sparkfun Item #: TOL-10447 -

"While our small diagonal cutters are great for hobby use, sometimes you need something with a little more bite. These electronic snippers are great for cutting wires and component leads. They have a cushioned handle which makes them much more comfortable to use. These snippers can be used are wire cutters if the need be, and are great if you’re looking for something a little better than hobby grade."

Flat Cutter - 0.0625" Diameter, #112 (3 Pack)
OOD!
Price: $73.04
View
Availability: Back Order
Sparkfun Item #: TOL-14851 -

"This is a three pack of flat mills from Carbide 3D that are perfect for roughing or machining flat or prismatic parts. Each mill in this pack features a cutting diameter of 0.0625 inches, a shank diameter of 0.125 inches, and a cutting length of 0.25 inches. These cutters provide you with a specialized tool for 3D machining and fabrication. Each cutter is made of solid carbide to ensure long lasting use. Features: Cutting Diameter: 0.0625in Cutting Length: 0.25in Shank Diameter: 0.125inn " ...

Flat Cutter - 0.125" Diameter, #102 (3 Pack)
OOD!
Price: $73.04
View
Availability: Back Order
Sparkfun Item #: TOL-14849 -

"This is a three pack of flat mills from Carbide 3D that are perfect for roughing or machining flat or prismatic parts. Each mill in this pack features a cutting and shank diameter of 0.125 inches and a cutting length of 0.5 inches. These cutters provide you with a specialized tool for 3D machining and fabrication. Each cutter is made of solid carbide to ensure long lasting use. Features: Cutting Diameter: 0.125in Cutting Length: 0.5in Shank Diameter: 0.125in " ...

Flexible Coolant Pipe - 1ft (1/2")
Price: $3.39
View
Availability: Stocked
Sparkfun Item #: TOL-12783 -

"These plastic Flexible Coolant Pipes have been primarily used to spray refrigeration or washing fluid for machine tools but, thanks to their articulation, they can be used in a multitude of different ways as well. We use them as extra arms for our third hand. The coolant pipes are 1ft long with a nozzle diameter of 3.5mm and ½"-20 pipe thread."

Flush Cutters - Xcelite
Price: $15.21
View
Availability: Stocked
Sparkfun Item #: TOL-14782 -

These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, but if you really need to get up close and personal, flush cutters are the way to go! Each pair of these cutters has a 3/4in jaw length and are 5in in overall length. This tool flush cuts soft wire up to 20 AWG (0.8mm) and is ESD safe.Note: To make sure that these flush cutters ship safely, there has been an extra amount of grease applied to the...

Grease for 3D Printer (5 gram)
OOD!
Price: $1.64
View
Availability: Back Order
DFRobot Item #: FIT0276 -

This box of grease is very small, light and easy to carry. It can be uesd in many places. It is suitable for the condition of light load or high speed plastic gear, plastic parts, nylon retainer bearing lubrication, protection and noise reduction. You will need it for your robot and 3D Printer. |Specification| Net Weight : 5g|ShippingList| Grease(5g) x1

Hackerspace Passport
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: SWG-11079 -

"The Hackerspace Passport was a concept that sprung up as a way for hackers to show off their membership and credentials when visiting other hackerspaces. It’s also a way to record visits to other spaces and encourages hackers to intermingle and spread ideas throughout the hackerspace, um, space. At CCCamp 2011, Mitch Altman and Matthew Borgatti showed up with 2600 copies of their very own print version of the passport. They were a big hit. The idea is that each hackerspace or hacker...

Hacksaw kits
Retail: $30.03
Price: $23.10
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-THT03872T -

This hacksaw kits can cut metal, pipe, twist, plastic, rubber, glass, ceramic tile, etc. It includes one junior hacksaw and 6 replacement hacksaw blades and 2 special saw blade replace the blade to meet your different needs. Also it include 2 aiguilles, it can cut glass, ceramic and so on. This hacksaw kits suits for handicraft art or other household use. This kit will be a good helper for maker.Package listHacksaw kits x1Wiki & External links ...

Hakko FX-901 Cordless Soldering Iron
OOD!
Price: $66.86
View
Availability: Back Order
Sparkfun Item #: TOL-13151 -

"The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the go. Powered by four AA sized batteries, this soldering iron is capable of 60-120mins of use (depending on battery type) before replacing its power cells. The max temperature for this iron is also determined by the type of battery you use. For instance if you were to use a alkaline battery you would have a higher temperature output of about 600°C (peak)...

Heat Shrink Retail
Price: $15.56
View
Availability: Back Order
Sparkfun Item #: RTL-11379 -

"We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors, lots of sizes, nothing too long. We specially requested some of the sizes with heat sensitive glue which significantly increases stress relief and water proofing. This kit includes 95 pieces of heat shrink, all of varying colors and sizes, and comes in a...

Hemostats-Curved
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: TOL-08555 -

Hemostats-Curved Description: 5" hemostats with a curved tip. We use them exclusively to hold small SMD parts in place while soldering. A must have for any hand-assembly project.

Hex Key - Plas-T-Key T Handle (Straight End, 7/64")
OOD!
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-14220 -

"This is a T-Handle 7/64" Hex Key from Allen. The Plas-T-Key is Allen’s standard handle and features a plastic grip, which provides durability and extra torque while in use. Each hex key is 2.125" long with a shaft composed of a black oxide-finished, tempered steel alloy that is terminated in a straight end. These hex keys can be used in a variety of ways, including robotics or for the 6-32 screws used by most Actobotics products." ...

Hex Key Set - Metric (Ball End, 9 Pieces)
OOD!
Price: $43.73
View
Availability: Back Order
Sparkfun Item #: TOL-14223 -

"This is a set of nine high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the screw to work in hard-to-reach areas. These specific keys utilize the metric measurement system. These are the go-to hex keys we prefer to use when metric is involved! Each hex key is composed of a black oxide-finished, tempered steel alloy and comes in a noninterference, hinged “caddy” to provide easy access. All hex keys are...

Hex Key Set - SAE (Ball End, 13 Pieces)
OOD!
Price: $34.69
View
Availability: Back Order
Sparkfun Item #: TOL-14222 -

"This is a set of 13 high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the screw to work in hard-to-reach areas. These specific keys utilize the United States customary system (sometimes referred to as Imperial). These wrenches will work for any SAE (Society of Automotive Engineers) parts. Each hex key is composed of a black oxide-finished, tempered steel alloy and comes in a noninterference hinged “caddy”...

Hobby Knife
OOD!
Price: $5.13
View
Availability: Back Order
Sparkfun Item #: TOL-09200 -

"It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap."

Hobby Knife Replacement Blades
OOD!
Price: $3.39
View
Availability: Back Order
Sparkfun Item #: TOL-10325 -

"If you use your hobby knife a lot, chances are you will need extra blades. These #11 blades are very sharp and good for trimming all sorts of things. Each pack comes with 5 blades that work with our hobby knife listed below."

Infrared Thermometer MLX90614 Breakout Board
Price: $18.38
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-SPM90614S -

This is a MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer for use with Arduino, or any microcontroller that can communicate with it through it's I2C interface. Features Small size, low cost Mounted on a breakout board with two types of pins 10k Pull up resistors for the I2C interface with optional solder jumpers Easy to integrate Factory calibrated in wide temperature range:-40?+125?C for sensor temperature and -70?+380?C for object temperature. High accuracy of 0.5?C over...

INOVA-1800 Filament 3mm - 1kg (Black)
Price: $166.84
View
Availability: Back Order
Sparkfun Item #: TOL-13936 -

"This is a 1kg (2.2lb) reel of 3mm black INOVA-1800 co-polyester filament for 3D printing made from Eastman Amphora™ 1800 3D polymer. INOVA-1800 prints have a glossy, smooth finish and feature a great balance of strength and 3D printing ease. 3D prints with this filament are dimensionally stable, bridge well and are a great choice for interlocking objects, props and other functional 3D prints. This is the Cadillac of 3D printer filament and should be your go-to option for creating your...

Insulated Silicone Soldering Mat
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-14672 -

"Keeping your workspace clean and well kept has always been a paramount concern for keeping all your possessions well maintained and pristine. With this Insulated Silicone Soldering Mat, you will be provided with the means to protect your desktop, soldering station, or workbench from the superheated tip of a soldering iron! Each mat is equipped with a large working area for all your soldering needs as well as a plenty of organization “buckets” (one large, three medium, eight small,...

JST connector Kit (2.54mm) (0.1)
OOD!
Price: $15.34
View
Availability: Back Order
DFRobot Item #: FIT0255 -

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). |Specification| Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range?-25? to +85??including temperature rise in applying electrical current? Contact resistance?Initial value/10m &;Omega; max. After environmental testing/20m &;Omega; max. Insulation resistance?1000M &;Omega; min. Withstanding voltage?1000V AC/minute...

LM8UU Linear Bearings for 3D Printer
Price: $7.42
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-P3D0125LM8 -

      This linear ball bearing is intended to slide along an M8 linear shaft. They are used in all RepRap (Prusa i3) and other 3D printers for X / Y Axis Movements. Features 24mm long x 15mm outer diameter x 8mm inner diameter

Logic 4 - USB Logic Analyzer
Price: $229.44
View
Availability: Back Order
Sparkfun Item #: TOL-13195 -

"This is the Logic 4, a powerful logic analyzer in a very small anodized aluminum package from Saleae Logic. We absolutely love the simplistic, sleek design with light-weight software and a high-quality finish. Who needs 50+ connections when you’re troubleshooting I2C? With USB connectivity, you can analyze up to 4 digital waveforms (with one input able to analyze both analog and digital waveforms) and timing information on your I2C, SPI, serial, and digital IO lines with ease. This...

Logic Pro 8 - USB Logic Analyzer
OOD!
Price: $1,460.65
View
Availability: Back Order
Sparkfun Item #: TOL-13196 -

"Do you need big logic analysis in a small package? That’s exactly what the Logic Pro 8 brings you. The Logic Pro 8 is a 8-channel USB logic analyzer with so much style it’ll make your cell phone jealous. Simply connect it to your computer with the included USB 3.0 cable, attach your test probes and install the Saleae Logic software and you’ll be debugging in no time. Along with adding 4 more channels of signal capture, the Logic Pro 8 differs from the Logic 4 by increasing...

Machine Screw - Socket Head (6-32 ; 1"; 25 pack)
Price: $7.83
View
Availability: Back Order
Sparkfun Item #: ROB-12528 -

"These zinc-plated socket head machine screws are 1"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 1” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 1-1/4"; 25 pack)
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: ROB-12393 -

"These zinc-plated socket head machine screws are 1-¼"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 1-1/4” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 1-1/8"; 25 pack)
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: ROB-12313 -

"These zinc-plated socket head machine screws are 1-1/8"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 1-1/8” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 1/4"; 25 pack)
Price: $4.35
View
Availability: Back Order
Sparkfun Item #: ROB-12517 -

"These zinc-plated socket head machine screws are 1/4” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 1/4” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 3/4"; 25 pack)
Price: $7.21
View
Availability: Back Order
Sparkfun Item #: ROB-12295 -

"These zinc-plated socket head machine screws are 3/4” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 3/4” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 3/8"; 25 pack)
OOD!
Price: $4.35
View
Availability: Back Order
Sparkfun Item #: ROB-12423 -

"These zinc-plated socket head machine screws are 3/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 3/8” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 7/16"; 25 pack)
Price: $5.64
View
Availability: Back Order
Sparkfun Item #: ROB-12485 -

"These zinc-plated socket head machine screws are 7/16” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 7/16” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 7/8"; 25 pack)
Price: $7.21
View
Availability: Back Order
Sparkfun Item #: ROB-12380 -

"These zinc-plated socket head machine screws are 7/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 7/8” Thread Pitch - 6-32 "

Machine Screw - Socket Head (6-32 ; 9/16"; 25 pack)
Price: $5.64
View
Availability: Back Order
Sparkfun Item #: ROB-12229 -

"These zinc-plated socket head machine screws are 9/16"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" hex key and work with all 6-32 Actobotics products. Dimensions: Length - 9/16” Thread Pitch - 6-32 "

Mean Well LED Switching Power Supply - 5VDC, 5A
OOD!
Price: $27.30
View
Availability: Back Order
Sparkfun Item #: TOL-14601 -

"This is a 25W single output switching power supply from Mean Well that has been specifically designed to work with LED applications. This power supply is extremely reliable and able to output 5VDC at up to 5A. We’ve been testing this power supply for quite some time and can definitely attest to its durability with its IP42, fully isolated plastic casing, short circuit, overload, and over voltage protections. The power supply includes wire pairs for the input (brown and blue) and output...

Medium Heatsink
OOD!
Price: $2.74
View
Availability: Back Order
Sparkfun Item #: PRT-14340 -

"This is a medium-sized heatsink that has been designed to dissipate heat away from your boards and ICs. Each of these black anodized heatsinks is perfect when used in conjunction with our ESP32 Thing Power Control Shield, but it also fits the TO-220 package. Documents: Dimensional Drawing "

Mesh cable guide (1.25m) (49.21)
OOD!
Price: $1.02
View
Availability: Back Order
DFRobot Item #: FIT0250 -

This is a black braided cable guide. The braid provides some rigidity to the cables, also, it can be expanded by compressing it which will allow many more cables to fit inside. |Specification| Color: Black Length: 1.25m (49.21") Inner diameter: 10mm (0.39") |ShippingList| Braided cable guide (1.25 meter)

microSD Card with Adapter - 32GB (Class 10)
OOD!
Price: $43.39
View
Availability: Back Order
Sparkfun Item #: COM-14832 -

"This is a class 10 32GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 microSD it is capable of transferring data at speeds up to 80MB/s allowing it to have a noticeable increase in performance while running an on-board OS. Each microSD card comes with its own SD adapter for better ease of access. Includes: 32GB MicroSD card MicroSD Adapter Features: Class 10 (up to 80MB/s read-write) 32GB...

microSD Card with Adapter - 64GB (Class 10)
OOD!
Price: $54.69
View
Availability: Back Order
Sparkfun Item #: COM-14833 -

"This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 microSD it is capable of transferring data at speeds up to 80MB/s allowing it to have a noticeable increase in performance while running an on-board OS. Each microSD card comes with its own SD adapter for better ease of access. Includes: 64GB MicroSD card MicroSD Adapter Features: Class 10 (up to 80MB/s read-write) 64GB...

Modular Plastic Storage Box - Medium (4 pack)
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-11528 -

"Face it, if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay, so maybe that just happens to some of us, but everyone could use a little organization and that’s exactly what this product offers. These modular storage boxes snap together so you can keep all of your parts separated and together all at once. As if that isn’t cool enough, the transparent lids on these storage modules are also spring...

Modular Plastic Storage Box - Small (10 pack)
Price: $6.87
View
Availability: Back Order
Sparkfun Item #: TOL-11527 -

"Face it, if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay, so maybe that just happens to some of us, but everyone could use a little organization and that’s exactly what this product offers. These modular storage boxes snap together so you can keep all of your parts separated and together all at once. As if that isn’t cool enough, the transparent lids on these storage modules are also spring...

Monocle Magnifier - Illuminated
OOD!
Price: $17.30
View
Availability: Back Order
Sparkfun Item #: TOL-09316 -

"When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-½". The 1" diameter eye piece fits snugly around your eye with a 15" aluminum-core headband. The LED provides sufficient light at the working distance. This loop magnifier set itself apart in our eyes because of the little LED on the side. Trying to view SMD connections is hard enough -...

Mooshimeter
OOD!
Price: $229.45
View
Availability: Back Order
Sparkfun Item #: TOL-13843 -

"The Mooshimeter is a multi-channel circuit testing multimeter that uses your smartphone or tablet, through Bluetooth 4.0, as a wireless, high-resolution graphical display. Each Mooshimeter is able to safely measure 600V at 10A with 24bit resolution from up to 150 feet away. If you’re curious about the Mooshimeter’s battery life, never fear, the meter uses two simple AA batteries and is capable of logging results for up to 6 months. Next time you need to check the current on your...

Multimeter Probes - Needle Tipped
Price: $8.61
View
Availability: Back Order
Sparkfun Item #: TOL-12078 -

"These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great for testing your SMD components! Each pair of cables come in standard red/black colors with caps to protect the needle tip leads. Dimensions: 36" Long" ...

Needle Nose Pliers
Price: $3.39
View
Availability: Stocked
Sparkfun Item #: TOL-08793 -

"Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long."

Nomad Flip Jig
OOD!
Price: $250.42
View
Availability: Back Order
Sparkfun Item #: TOL-14793 -

"The Nomad Flip Jig is a handy accessory for your Nomad 883 Pro that allows you to cut both sides of a part while maintaining perfect alignment. Each one of these jigs is precision machined to mount to the Nomad’s table and uses the CNC’s built-in machine calibration to make it easy to locate while attached. That means no edge finders are required! The Flip Jig is made to hold material for milling and fabrication that’s just under 3in (~76mm) by 5in (127mm) in size, and up to...

Nomad Low Profile Vise
OOD!
Price: $250.42
View
Availability: Back Order
Sparkfun Item #: TOL-14792 -

"This Low Profile Vise provides you with a compact workholding accessory for the Nomad 883 Pro. Each one of these vises are made from scratch, in-house at Carbide 3D, and includes everything you need to attach it to your Nomad. The With the Low Profile Vise you will be able to miniature and small silhouette milling projects. The Low Profile Vise has a maximum clamping width of 6.5in (~165mm) and is only 8in (~203mm) long and 2in (~50mm) wide. It should go without saying that this vise will...