Resistors

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1 Ohm, 2 Ohm, 4 Ohm, 8 Ohm, and 16 Ohm. These resistors are capable of dissipating...

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1 Ohm, 2 Ohm, 4 Ohm, 8 Ohm, and 16 Ohm. These resistors are capable of dissipating large amounts of power without damaging themselves. This kit is perfect for testing projects that require large amounts of power while only requiring low resistance. This kit comes in a box of 25. Includes: 5x 1Ω 10 Watt Resistor 5x 2Ω 10 Watt Resistor 5x 4Ω 10 Watt Resistor 5x 8Ω 10 Watt Resistor 5x...

1.0M Ohm, 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our...

1.0M Ohm, 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones). Note: Sold as singles. But check below for multi-packs. Documents: Breadboard Lecture Sensor Interfacing Voltage Dividers ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project! These resistors come in bags of 20. Documents: Resistors Guide ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project! These resistors come in bags of 20. They are the same resistors found in the SparkFun Inventor's Kit v4.0,...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We've opted for a new and...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones). These resistors come in bags of 20. Documents: Breadboard Lecture Sensor Interfacing Voltage Dividers ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project! These resistors come in bags of 20. Documents: Resistors Guide ...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project! These resistors come in bags of 20. Documents: Resistors Guide ...

This is a 220 Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker...

This is a 220 Ohm, 1/4th Watt, +/- 5% tolerance PTH resistor. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones). Note: Sold as singles. Features: Tolerance: ±5% Power (Watts): 0.25W, 1/4W Composition: Carbon Film Features: Flame Retardant Coating, Safety Temperature Coefficient: 0/ -400ppm/°C Operating Temperature: -55°C ~ 155°C Package / Case: Axial Size / Dimension: 0.091"" Dia x 0.236""...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make excellent LED current limiters...

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make excellent LED current limiters and are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project! These resistors come in bags of 20. They are the same resistors found in the SparkFun Inventor's Kit...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors. Documents: Breadboard Lecture Sold in single pieces

Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're...

Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to stock up, and keep them organized. We have just the thing! Our new branded resistor kit comes with 25 each of 20 different resistor values (including 0Ω links!). All of these resistors are stapled into a tri-fold pack and clearly labeled. The...

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line...

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that share a common terminal on pin 6 (denoted with a black dot). These work great as current limiting resistors for rows of LEDs and two of these can replace 10 individual wire-lead resistors when hooking up our 10 LED bargraph displays. They also work...