Skip to main content

My Items
If you feel that you've received this message in error, please click here for more information.

Your Saved For Later list is empty.
My Favorites
  • Sovol SH03 four-spool dual-chamber filament dryer NZ
  • Sovol SH03 open chambers holding four filament spools
  • Sovol SH03 independent chamber temperature control
  • Sovol SH03 360-degree circulating hot-air filament drying
  • Sovol SH03 twin 200W PTC heating up to 85 degrees
  • Sovol SH03 automatic chamber dehumidification system
  • Sovol SH03 real-time dual-chamber temperature humidity monitoring
  • Sovol SH03 feeding four dry spools to multiple printers
Sovol SH03 four-spool dual-chamber filament dryer NZ

Sovol SH03 Four-Spool Filament Dryer

Item #: SVL-A-500105102376
There are no reviews yet Write a review
Price: $299.00 inc GST
Retail Price: ##RETAILPRICE## inc GST
Was $312.61
    Points to Purchase:1994
    You Save: $13.61 (4.4%)
    The product is in stock Availability: Limited Stock
    Usually ships In a day

    About This Item

    • Official Sovol product with AU-standard power connection
    • NZ-based support from MindKits
    • Preorder now: expected at our warehouse around 9 October 2026.
    Four-spool high-temperature drying

    Dry different materials in two independent chambers

    The SH03 gives busy printers two separately controlled drying zones, 400W total PTC heating and room for up to four 1kg spools.

    85°CMaximum drying temperature
    200W + 200WIndependent heaters
    4 × 1kgMaximum spool capacity
    <50dBSovol noise claim
    Run two drying programmes at once

    Run two drying programmes at once

    Each chamber has independent temperature control, so two material groups can be treated separately instead of forcing every spool through one shared setting.

    Heat up to 85°C

    Heat up to 85°C

    Twin 200W PTC heaters provide up to 400W total power. Sovol states the SH03 reaches 50°C in about four minutes and 70°C in about twelve minutes.

    Actively move moisture out

    Actively move moisture out

    Automatic dehumidification opens a steam outlet to discharge moisture rather than leaving it trapped inside the chamber.

    Monitor both sides in real time

    Monitor both sides in real time

    The display reports settings and live conditions for both chambers, with one-touch presets covering ten common filament families.

    Feed several printers from one dryer

    Feed several printers from one dryer

    The four-spool format and redesigned filament outlets suit print farms, workshops and multicolour workflows where several dry spools need to remain available.

    Technical specifications

    Model
    Sovol SH03
    Input
    200–240V, 50Hz, AU-standard plug
    Rated power
    400W total
    Heating
    Two independent 200W PTC systems
    Working temperature
    45–85°C
    Capacity
    Four spools up to 70mm wide, or two spools up to 150mm wide
    Filament diameter
    1.75mm and 2.85mm
    Display humidity range
    0–99%
    Display temperature range
    0–99°C
    Supported presets
    PLA, ABS, PETG, TPU, PVA, ASA, PA, PP, PC and PET
    Machine size
    372 × 288 × 263mm
    Machine weight
    3.4kg
    Shipping weight
    4.85kg
    Operating environment
    5–40°C

    A dryer for demanding materials and busy benches

    Higher-temperature capability makes the SH03 particularly useful for hygroscopic materials such as PA/nylon, PC, PVA and some engineering blends. Independent chambers also let a workshop keep everyday PLA or PETG ready on one side while treating a more demanding material on the other.

    Always use the filament maker’s recommended drying temperature and duration.

    What is in the box

    • Sovol SH03 Filament Dryer, 230V
    • AU-standard power connection

    Filament and printers shown in the images are not included.

    MindKitsTM

    Phone: 09 367 7474

    Email: orders@mindkits.co.nz

    Auckland, NZ 0794

    Subscribe to our newsletter to receive news on update.

    © 2026 MindKits Ltd. All Rights Reserved. MindKits™ is a trademark of MindKits Ltd.
    Facebook
    Youtube
    Instagram