Products 1-48 of 49
Show
2x5 Pin IDC Ribbon Cable
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: PRT-08535 -

Simple IDC ribbon cable. Used for AVR programming, general communication, and all around handy-ness. Datasheet shows an incorrect length. Cable length is 6" Documents: Datasheet

Alligator Clip with Female Header (10 Pack)
OOD!
Price: $12.67
View
Availability: Back Order
Sparkfun Item #: CAB-15186 -

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those clips into a breadboard, development platform or anything else to which you would normally be able to attach a hookup wire. Each alligator clip with female header cable has a wire length of 30cm (that's a little less than 1ft) and a port that...

Alligator Clip with Pigtail (10 Pack)
Price: $12.55
View
Availability: Stocked
Sparkfun Item #: CAB-14303 -

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily incorporate those clips into a breadboard, development platform or anything else to which you would normally be able to attach a hookup wire. Each alligator clip with pigtail cable has a wire length of 30cm (that's a little less than 1ft) and a male pin that...

Alligator Clip with Pigtail (4 Pack)
OOD!
Price: $5.32
View
Availability: Back Order
Sparkfun Item #: CAB-13191 -

This is a 4 pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a hookup wire to. Each Alligator Clip with Pigtail cable has a wire length of 30cm (that's a little less than 1ft) and a male pin that easily inserts into...

Alligator Clip with Spade Connector (10 Pack)
OOD!
Price: $12.67
View
Availability: Back Order
Sparkfun Item #: CAB-15268 -

This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female spade connector on the other. Alligator clips are a staple item for any workbench or makerspace, and with these cables you will be able to easily connect to things like microswitches. Each alligator clip with spade connector has a wire length of 15cm (that's a little less than 6in) at 24AWG with a FDD 5.5-250 spade connector with a red sheath. Each pack consists of 10 cables (2 each of red, white,...

Alligator Test Leads - Multicolored (10 Pack)
Price: $5.87
View
Availability: Stocked
Sparkfun Item #: PRT-12978 -

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have. Each lead in this pack of tern is 50cm long with a rubber shrouded alligator clip on each end. There are five different colors, you get two each of: red,...

Alligator Test Leads - Multicolored (7 Pack)
OOD!
Price: $4.65
View
Availability: Back Order
Sparkfun Item #: DD-15333 -

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them, these spring-loaded clips are a workshop must-have. Each lead in this pack of seven is 50cm long with a rubber shrouded alligator clip on each end. Please be aware that there are a random assortment of...

Banana to Alligator Cable
Price: $7.13
View
Availability: Stocked
Sparkfun Item #: CAB-00509 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Features: 36" long

Banana to Alligator Coax Cable
OOD!
Price: $8.77
View
Availability: Back Order
Sparkfun Item #: CAB-00508 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with stress relief sleeves. Features: 36" long

Banana to Banana Cable - Right Angle
OOD!
Price: $10.63
View
Availability: Back Order
Sparkfun Item #: CAB-15368 -

These are 12" long cables terminated with banana plugs. Pretty standard, right? Wrong! These right angle banana plugs were specifically made to be great, low profile matches to the contacts on the boards in the micro:bit and gator:bit ecosystems. This allows for easy press-fit connections, all without the temptation to stick your finger into the open jaws of an alligator clip (c'mon, we've all been there). They're particularly ideal for younger users. This is a set of five cables, in assorted...

Banana to Banana Cables
Price: $8.94
View
Availability: Stocked
Sparkfun Item #: CAB-00507 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Features: 36" Long

Banana to IC Hook Cables
OOD!
Price: $9.31
View
Availability: Back Order
Sparkfun Item #: CAB-00506 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Features: 36" Long

Barrel Jack Extension Cable - M-F (3 ft)
Sale!
OOD!
Price: $3.10
View
Availability: Back Order
Sparkfun Item #: COM-11706 -

Do you fear that your power may not be "far reaching" enough? How would another 3' work for you? Okay, so it doesn't sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Don't hack apart a nice clean barrel jack connection just because it won't reach, this male-to-female barrel jack extension cable will make the reach. This cable is terminated with 5.5x2.1mm barrel connectors, one male and one female, and fits most of our products that use a DC...

Barrel Jack Extension Cable - M-F (6 ft)
OOD!
Price: $3.46
View
Availability: Back Order
Sparkfun Item #: COM-11707 -

Do you fear that your power may not be "far reaching" enough? How would another 6' work for you? Okay, so it doesn't sound very dramatic, but sometimes an extra 6' of power cable is exactly what your project needs. Don't hack apart a nice clean barrel jack connection just because it won't reach, this male-to-female barrel jack extension cable will make the reach. This cable is terminated with 5.5x2.1mm barrel connectors, one male and one female, and fits most of our products that use a DC...

BNC Probe Kit
Price: $26.99
View
Availability: Stocked
Sparkfun Item #: CAB-09486 -

The BNC probe kit includes a 20MHz professional probe with hook and tip as well as a couple converters to connect the probe to either a BNC jack, RCA jack, or a PCB mount. Each Probe is 4ft (1.2m) in length and is perfect for most midrange applications. This kit was designed for use with our Digital Oscilloscope Kit, but can be used in a variety of other way or with other parts. Includes: 20MHz professional probe with tip, hook connector and ground alligator clip BNC-to-RCA(male)...

BNC to Alligator Cable
Price: $8.94
View
Availability: Stocked
Sparkfun Item #: CAB-00504 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Features: 36" Long

Bus Pirate Cable
Price: $8.94
View
Availability: Stocked
Sparkfun Item #: CAB-09556 -

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of the cable are terminated with female ends to mate with test hooks. The pin-out of the connector is documented here. ...

IC Hook Test Leads
OOD!
Price: $15.86
View
Availability: Back Order
Sparkfun Item #: CAB-00501 -

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads. Features: 14" Long

IC Hook with Pigtail
Price: $8.94
View
Availability: Stocked
Sparkfun Item #: CAB-09741 -

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own. Wire length is 2.5" long. Male pin easily inserts into breadboard or other standard 0.1" connector.

Infrared Sensor Jumper Wire - 3-Pin JST
Price: $2.71
View
Availability: Stocked
Sparkfun Item #: SEN-08733 -

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness. If you need this cable and the mating connector, check out the wire assembly in the related products below!

Interface Cable - SMA Female to SMA Male (25cm)
Price: $8.77
View
Availability: Out of Stock
Sparkfun Item #: WRL-12861 -

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections. These work well for mounting an antenna to the outside of an enclosure, while keeping the electronics neatly inside. Documents: Dimensional Drawing SMA...

JST to Breadboard Jumper (3-pin)
Price: $2.71
View
Availability: Stocked
Sparkfun Item #: CAB-13685 -

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device's pins. Wire length is 140mm (about 5.5 inches) long. The adapter's wires have been color coded to Red, Black, and Yellow. Additionally, the female JST connector featuring a basic 2mm pitch while the male hookup pins can easily insert...

JST-PH Female to JST-SM Female Adapter - 100mm
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: PRT-14999 -

This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Female connector on the other. It can be used as a bridge between their respective connector mates. Each wire is 100mm long and is capable of supporting up to 300V. These adapters can be used with our EL products to make them more useful with different types of connectors.

JST-PH Female to JST-SM Male Adapter
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: PRT-14707 -

This simple adapter wire terminates on one end with a JST-PH Female connector, and a JST-SM Male connector on the other. It can be used as a bridge between their respective connector mates. Each wire is 95mm long and is capable of supporting up to 300V We actually ordered these wires to provide a handy adapter for our EL products but unfortunately we received them with swapped connectors. We still wanted to offer these to all of you in case you could find a use for them! Note: Since this...

JST-PH Male to JST-SM Male Adapter - 100mm
Price: $2.66
View
Availability: Out of Stock
Sparkfun Item #: PRT-14998 -

This simple adapter wire terminates on one end with a JST-PH Male connector, and a JST-SM Male connector on the other. It can be used as a bridge between their respective connector mates. Each wire is 100mm long and is capable of supporting up to 300V These adapters can be used with our EL products to make them more useful with different types of connectors.

LED Strip Pigtail Connector (2-pin)
OOD!
Price: $1.99
View
Availability: Back Order
Sparkfun Item #: CAB-14574 -

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don't have a specific use for these pigtail connectors now, it's good to have them handy when you need them! Each connector pack comes with one male and one female connector. The 20AWG wire leads are colored in a red/black sequence, are almost 4 inches (10cm) long and are terminated with a JST-SM connector on...

LED Strip Pigtail Connector (3-pin)
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: CAB-14575 -

These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don't have a specific use for these pigtail connectors now, it's good to have them handy when you need them! Each connector pack comes with one male and one female connector. The 20AWG wire leads are colored in a red/green/yellow sequence, are almost 4 inches (10cm) long and are terminated with a JST-SM...

LED Strip Pigtail Connector (4-pin)
OOD!
Price: $3.32
View
Availability: Back Order
Sparkfun Item #: CAB-14576 -

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don't have a specific use for these pigtail connectors now, it's good to have them handy when you need them! Each connector pack comes with one male and one female connector. The 20AWG wire leads are colored in a red/blue/green/yellow sequence, are almost 4 inches (10cm) long and are terminated with a JST-SM...

LIDAR-Lite Accessory Cable
Price: $11.96
View
Availability: Out of Stock
Sparkfun Item #: CAB-14043 -

This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. You can use this cable as a replacement to the one you are currently using, as a backup in case of damage, or if you just need a second one. The LIDAR-Lite Accessory Cable is 200mm (~7.8in) long with specific pin-outs found on the second page of the Operation & Technical Manual below. Documents: Operation & Technical...

Multimeter Probes - Tweezers
OOD!
Price: $9.31
View
Availability: Back Order
Sparkfun Item #: TOL-11060 -

Testing surface-mount components with standard test leads is anything but easy. Everyone has their own method: some people tackle it with teamwork and have a friend (or grad student) hold the probes, some people have adapted a sort of chopsticks-like technique, but the best way by far is probably just to buy these handy tweezer probes! Tweezer probes connect to your existing instrumentation with shrouded banana connectors and allow you to easily test small parts with one hand. The large...

Qwiic Cable - 100mm
OOD!
Price: $3.32
View
Availability: Back Order
Sparkfun Item #: PRT-14427 -

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. Each Qwiic Cable's wires have been color coded to Red, Black, Blue, and Yellow. The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. All Qwiic enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount...

Qwiic Cable - 200mm
OOD!
Price: $3.32
View
Availability: Back Order
Sparkfun Item #: PRT-14428 -

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. Each Qwiic Cable's wires have been color coded to red, black, blue and yellow. The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of...

Qwiic Cable - 500mm
OOD!
Price: $4.65
View
Availability: Back Order
Sparkfun Item #: PRT-14429 -

This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. Each Qwiic Cable's wires have been color coded to red, black, blue and yellow. This cable is used for connecting Qwiic boards that need to be very far away from the controller. Note that I2C signals will degrade over longer distances. We recommend keeping the connections to 1 meter or less. That said, we've daisy-chained...

Qwiic Cable - 50mm
OOD!
Price: $1.99
View
Availability: Back Order
Sparkfun Item #: PRT-14426 -

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. Each Qwiic Cable's wires have been color coded to red, black, blue and yellow. The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of...

Qwiic Cable - Breadboard Jumper (4-pin)
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: PRT-14425 -

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins. The 28AWG wire's length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can...

Qwiic Cable - Grove Adapter (100mm)
OOD!
Price: $3.32
View
Availability: Back Order
Sparkfun Item #: PRT-15109 -

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove boards from Seeed Studio. Now you can plug Seeed Studio boards you may have onto the Qwiic bus or you can use this cable to introduce Qwiic sensors, inputs, and outputs into your...

Raspberry Pi - GPIO Ribbon Cable (6")
OOD!
Price: $5.23
View
Availability: Back Order
Sparkfun Item #: CAB-11489 -

This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Check the related items below for the mating connector! Features: 6" long Documents: Datasheet Videos ...

Raspberry Pi GPIO Ribbon Cable - 40-pin, 6" (RPi 3, RPi2, B+)
OOD!
Price: $5.32
View
Availability: Back Order
Sparkfun Item #: CAB-13028 -

This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 3, 2, and B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Features: 6" long Documents: Datasheet Product Video Videos ...

Raspberry Pi Zero Camera Cable
OOD!
Price: $10.63
View
Availability: Back Order
Sparkfun Item #: PRT-14272 -

The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi board --- luckily, that's where this cable can help! The Raspberry Pi Zero Camera Cable replaces the pre-existing camera module cable, allowing your Zero or Zero W light and imaging capabilities. This cable measures 15cm from end to end and can easily be swapped in and out. Note: This product only includes the CSI cable and does NOT include a Raspberry Pi...

Ribbon Cable - 10 wire (15ft)
Price: $8.85
View
Availability: Stocked
Sparkfun Item #: CAB-10647 -

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. length of 10-wire ribbon cable. Check the related products below for crimp-on connectors that will fit this cable. Documents: [Datasheet](http://cdn.sparkfun.com/datasheets/Cables/HookUp/Morethanall IDC Cable HFR-28R3HF-xx.pdf) ...

Ribbon Cable - 10 wire (3ft)
OOD!
Price: $2.13
View
Availability: Back Order
Sparkfun Item #: CAB-10649 -

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 3ft. length of 10-wire ribbon cable. Check the related products below for crimp-on connectors that will fit this cable. Documents: [Datasheet](http://cdn.sparkfun.com/datasheets/Cables/HookUp/Morethanall IDC Cable HFR-28R3HF-xx.pdf)

Ribbon Cable - 6 wire (15ft)
OOD!
Price: $5.23
View
Availability: Back Order
Sparkfun Item #: CAB-10646 -

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. length of 6-wire ribbon cable. Check the related products below for crimp-on connectors that will fit this cable. Documents: [Datasheet](http://cdn.sparkfun.com/datasheets/Cables/HookUp/Morethanall IDC Cable HFR-28R3HF-xx.pdf)

RockBLOCK 9603 Accessory Cable
OOD!
Price: $9.31
View
Availability: Back Order
Sparkfun Item #: CAB-14720 -

This is a simple accessory cable meant to be used in conjunction with the RockBLOCK 9603. The RockBLOCK 9603 Accessory Cable is terminated with a simple 10-pin molex-style connector at one end and a male hookup pigtail at the other. This accessory cable will help speed up your development time, meaning you no longer need to terminate and crimp your own connector for the RockBLOCK 9603. If you're going to connect the RockBLOCK 9603 to anything other than your computer's USB port, you are going...

Sensor Cable - Electrode  Pads (3 connector)
OOD!
Price: $10.63
View
Availability: Back Order
Sparkfun Item #: CAB-12970 -

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Features: 24" Long 4 mm connector Documents: Product Video

SparkFun Qwiic Cable Kit
Price: $14.09
View
Availability: Out of Stock
Sparkfun Item #: KIT-15081 -

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and time! It has a little something for everyone. The SparkFun Qwiic Cable Kit includes 10 cables of various lengths and styles that will get your Qwiic boards connected together, to a development...

SWD Cable - 2x5 Pin
OOD!
Price: $3.99
View
Availability: Back Order
Sparkfun Item #: CAB-15364 -

This is a 150mm (~6") long, 10-conductor cable that's especially ideal for many JTAG applications. Both ends are terminated with 2x5 pin female connectors with 1.27mm (0.05") spacing. Documents: Datasheet

XLR-3 Cable - 10ft
OOD!
Price: $17.64
View
Availability: Back Order
Sparkfun Item #: CAB-15309 -

This is a 10 foot (~3m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR connectors...

XLR-3 Cable - 25ft
OOD!
Price: $35.36
View
Availability: Back Order
Sparkfun Item #: CAB-15310 -

This is a 25 foot (~7.6m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR...