Products 1-15 of 15
Show
9 Pin Female Serial Connector - PCB Mount
OOD!
Price: $3.32
View
Availability: Back Order
Sparkfun Item #: PRT-00429 -

DB9 female header - right angle PCB mount. 0.318" Style. Documents: Datasheet

ATmega128RFA1 Development Board
Sale!
Price: $52.50
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: DEV-11197 -

"The ATmega128RFA1 is a portmanteau of sorts – two separate components combined to form one device; half microcontroller, half RF transciever. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontroller and best-in-class 2.4GHz RF transceiver providing industry’s highest RF performance for single-chip devices, with a link budget of 103.5dBm. The ATmega128RFA1 features Wake-on Radio, 32-bit MAC symbol counter, temperature sensor,...

AVR Programming Cable
OOD!
Price: $3.46
View
Availability: Back Order
Sparkfun Item #: CAB-09215 -

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces. Cable is about 12" long and mates with pins on 1/10in centers.

J-Link BASE Compact Programmer
Price: $804.01
View
Availability: Out of Stock
Sparkfun Item #: PGM-15347 -

The J-Link line of JTAG programmers from Segger is well known for their top of the line debuggers. The J-Link BASE is a USB powered JTAG debug probe supporting a large number of CPU cores. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. The J-Link Base is a great option for those getting started with JTAG/SWD programming and...

J-Link EDU Base Programmer
Price: $138.26
View
Availability: Out of Stock
Sparkfun Item #: PGM-15346 -

The J-Link line of JTAG programmers from Segger is well known for their top of the line debuggers. A low-cost J-Link for educational purposes, the J-Link EDU is identical to J-Link BASE and offers the same functionality. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. The J-Link EDU is a great option for those getting started with JTAG/SWD programming and debugging, but want a bit more power than the EDU...

J-Link EDU Mini Programmer
OOD!
Price: $41.48
View
Availability: Back Order
Sparkfun Item #: PGM-15345 -

The J-Link line of JTAG programmers from Segger is well known for their top of the line debuggers. The J-Link EDU Mini is a great option for those getting started with JTAG/SWD programming and debugging. Each J-Link EDU Mini is a version of the J-Link EDU Base in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. With a microB USB...

JTAG USB OCD Programmer/Debugger for ARM processors
Price: $133.17
View
Availability: Stocked
Sparkfun Item #: PGM-07834 -

This is the mother of all JTAG Programmers for ARMs - and it's about 1/10th the price of other programmer/debuggers with the same functionality! This programmer/debugger is the first on market three-in-one USB JTAG debugger, offering JTAG; RS232 (full modem signals supported) port; and power supply all in one compact device. It can be used as a power supply to ARM targets working in the voltage range of 2.0 to 5.0 V DC with three jumper selectable power supplies: 5V 9V and 12VDC. USB source...

MPLAB Compatible USB PIC Programmer
Price: $123.99
View
Availability: Out of Stock
Sparkfun Item #: PGM-09671 -

This PIC programmer, from Cana Kit, is a professional USB PIC Programmer offering ZIF (Zero Insertion Force) sockets, an ICSP header, and an ICD2 port for easy PIC programming. The programmer is 100% compatible with MPLAB (PICkit 2 interface), and therefore can program practically any PIC microcontroller including the PIC16F84A, PIC16F628, PIC18F458 and PIC16F877. This PIC Programmer uses a USB port for power and connection to the computer, as opposed to the traditional serial port,...

MPLAB PICkit 4 In-Circuit Debugger
Price: $115.10
View
Availability: Out of Stock
Sparkfun Item #: PGM-15797 -

This is the PICkit 4, the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers and MPUs using the powerful graphical user interface of the MPLAB X Integrated Development Environment (IDE). The MPLAB PICkit 4 is connected to a PC using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to...

PICAXE USB Programming Cable
OOD!
Price: $37.33
View
Availability: Back Order
Sparkfun Item #: PGM-08312 -

If you're looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programming cable allows PICAXE micros to be programmed from any platform (Windows and Linux). The cable has the FT232R embedded into the USB connector and will show up on your computer as a new COM port. If you're using Windows you'll need to install some drivers, which can be found on the PICAXE download page below, it's really easy! Documents: Datasheet PICAXE Download Page ...

Pocket AVR Programmer
Price: $30.04
View
Availability: Out of Stock
Sparkfun Item #: PGM-09825 -

This new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude, and is tested extensively on a Windows desktop. Based on Dick Streefland's USBtiny and Limor Fried's USBtinyISP. This is a low-cost programmer designed for those on a tight budget. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. The microcontroller-to-be-programmed can be any AVR...

SparkFun ISP Pogo Adapter
Price: $21.18
View
Availability: Out of Stock
Sparkfun Item #: KIT-11591 -

Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an In-system programming (ISP) adapter they become instantly better, this simple kit allows you to do just that. Introducing the ISP Pogo Adapter, a simple and easy way to adapt pogo pins to a 6-pin ISP header allowing you to program an IC still without soldering a header to do so. We've also included a labeled SIP header row and a 6-pin molex cable for you to...

SparkFun Pi AVR Programmer HAT
OOD!
Price: $39.17
View
Availability: Back Order
Sparkfun Item #: DEV-14747 -

The SparkFun Pi AVR Programmer HAT makes it easy to program AVRs directly from the SPI hardware pins on any Raspberry Pi. It was originally designed as an in-house solution for SparkFun production, but now is offered as a robust programming tool for anyone to purchase! This programmer is by far one of the fastest, most reliable, and hack-able (fully open sourced) AVR programming solutions available. Whether you’re a beginner or experienced electronics enthusiast, the Pi AVR Programmer HAT...

STK500 Compatible USB Programmer
Price: $88.02
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: PGM-08702 -

AVR-ISP500 is a fast and reliable USB AVR programmer, and works directly with AVR Studio. It is recognized as a STK500 programmer and programs all AVRs. It emulates USB CDC so no drivers are required and works under Windows, Linux and MacOS. If you do not want to use AVRStudio you can use AVR-ISP500 with AVRdude. Features: USB Powered Connects to PC via USB 2.0 Full speed Uses Atmel's 2x5 pin ICSP and 2x3 connector layout 45x30 mm (1.7x1.2") + 20 cm (8") cable Documents: User Manual AVR ICSP...

Tiny AVR Programmer
OOD!
Price: $29.96
View
Availability: Back Order
Sparkfun Item #: PGM-11801 -

The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That's right, now you can shrink your Arduino projects down to "tiny size" by moving your code straight over to these small but capable ICs. The standard method for programming the ATtiny ICs involves a breadboard, lots of jumper wires and a hardware programmer, but David Mellis over at MIT Media Lab has simplified the process by laying out this handy USB programmer. The Tiny AVR...