Products 2161-2184 of 2243
Show
Availability: Back Order
Item #: LCD-17153 -

SparkFun Qwiic OLED Display (0.91 in, 128x32)

Price: $17.11 inc GST

The SparkFun Qwiic OLED Display can display up to three lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a back light layer (unlike...

The SparkFun Qwiic OLED Display can display up to three lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a back light layer (unlike LCDs) and therefore it’s thinner, consumes less power, and has higher contrast. Thanks to an I2C command structure, the board's firmware maintains speed by updating only the part of the screen that changes This is the same concept use with "Dirty Rectangles" or "Bit blit" operations in computer...

Availability: Back Order
Item #: DEV-17156 -

SparkFun Qwiic Shield for Teensy - Extended

Price: $9.49 inc GST

The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint...

The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.1, Teensy 3.6, and Teensy 3.5. This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Teensy to four SparkFun Qwiic connectors (two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so, as long as your devices are on different...

Availability: Back Order
Item #: PRT-17157 -

Argon ONE Raspberry Pi 4 Case

Price: $53.65 inc GST

If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case. In addition to providing passive and active cooling to keep the Pi 4...

If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case. In addition to providing passive and active cooling to keep the Pi 4 running cool, it incorporates multiple pieces to allow for access to different levels of the board like a magnetic dedicated door for the 40 pin connector that provides pin numbers and labels. An included fan HAT provides software controllable, active cooling while the aluminum enclosure provides passive...

Availability: Back Order
Item #: PRT-17161 -

Argon NEO Raspberry Pi 4 Case

Price: $33.53 inc GST

This is probably one of the best, basic Raspberry Pi 4 cases you'll find. The Argon NEO Raspberry Pi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Raspberry Pi 4...

This is probably one of the best, basic Raspberry Pi 4 cases you'll find. The Argon NEO Raspberry Pi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Raspberry Pi 4 without obstructing access to the I/O ports on board. A plastic base protects any surface you place the enclosure on from scratches. The middle section is an aluminum shield that goes over top the connectors and board itself. it has extrusions that provide passive cooling for the hottest components...

Availability: Back Order
Item #: PRT-17162 -

Argon POLY+ Raspberry Pi 4 Case

Price: $11.96 inc GST

A basic case with some not so basic features. The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way. The case has a two step...

A basic case with some not so basic features. The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way. The case has a two step cover similar to that of the Argon NEO which provides covered protection for the board while leaving the I/O ports accessible and includes a top cover which covers all but leaves room for most HATs and PHATs to sit inside. Also included is a heat sink for the processor and thermal tape to attach it. We...

Availability: Out of Stock
Item #: DEV-17163 -

Argon40 Fan HAT for Raspberry Pi 4, 3B, and 3B+

Price: $22.02 inc GST

The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications. This software controlled fan comes in a typical HAT configuration and...

The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications. This software controlled fan comes in a typical HAT configuration and plugs right into the 40-pin I/O header on the Raspberry Pi. It will work with the 4, 3B, and 3B+ and fits in all the Argon40 cases we sell (It comes built into the Argon ONE, so no need to buy it if that's the case you're using. For quieter cooling, check out our line of heatsink cases or the Argon...

Availability: Back Order
Item #: SPX-17182 -

Qwiic Digital Capacitor - NCD2400M

Price: $17.77 inc GST

Ever need to fine tune an oscillator circuit or RF filter? It can be tricky and repetitive switching out capacitors on a PCB. The Qwiic Digital Capacitor, complete with the NCD2400M IC, can be a...

Ever need to fine tune an oscillator circuit or RF filter? It can be tricky and repetitive switching out capacitors on a PCB. The Qwiic Digital Capacitor, complete with the NCD2400M IC, can be a great solution. Solder the nibs onto any 0603 or 0402 footprint, plug in a Qwiic cable and RedBoard, and change the capacitance in code. With the SparkFun Qwiic Digital Capacitor Arduino Library, you can easily set and get the capacitance of the IC from 1.7 up to 200pF. You can also set the...

Availability: Back Order
Item #: TOL-17235 -

Stickvise PCB Vise

Price: $62.59 inc GST

Give your arms a rest! Stickvise holds your circuit board flat so you can solder with stability at table level. These flat PCB holders are great because your hands can rest directly on the table for...

Give your arms a rest! Stickvise holds your circuit board flat so you can solder with stability at table level. These flat PCB holders are great because your hands can rest directly on the table for fine soldering and probing. They also fit easily under a microscope and kept the PCB consistently in focus. Stickvise is designed with simple, high quality parts. The jaws are machined, bead blasted and anodized aluminum. The jaw plates are made with insulating Nylon 6/6. All other components are...

Availability: Back Order
Item #: KIT-17246 -

SparkFun JetBot AI Kit Powered by Jetson Nano 2GB

Price: $429.87 inc GST

The SparkFun JetBot AI Kit is a robot platform powered by the NVIDIA® Jetson Nano™ 2GB Developer Kit. This kit is developed and kitted by us here at SparkFun and is based on the open-source NVIDIA...

The SparkFun JetBot AI Kit is a robot platform powered by the NVIDIA® Jetson Nano™ 2GB Developer Kit. This kit is developed and kitted by us here at SparkFun and is based on the open-source NVIDIA JetBot! We understand that not everyone has access to multiple 3D printers and a whole warehouse of electronics so we wanted to build a kit from ready to assemble parts to get you up and running as quickly as possible. The SparkFun JetBot AI Kit Powered by Jetson Nano 2GB is a great launchpad for...

Availability: Out of Stock
Item #: SPX-17251 -

Qwiic Keyboard Explorer - Translucent

Price: $111.66 inc GST

Have you ever wanted to build your own mechanical keyboard, but you don't know where to start? Maybe you're a keyboard hacker extraordinaire and you're looking for a handy development platform....

Have you ever wanted to build your own mechanical keyboard, but you don't know where to start? Maybe you're a keyboard hacker extraordinaire and you're looking for a handy development platform. Either way, we designed the Qwiic Keyboard Explorer for you. The Qwiic Keyboard Explorer is a 14-key mechanical keyboard kit based on our Qwiic Pro Micro development board. On its own, it makes a conveniently sized programmable macro pad, but we've also included plenty of prototyping space along the top...

Availability: Out of Stock
Item #: PRT-17252 -

micro:bit Edge Connector - PTH, Right Angle (80-pin)

Price: $5.16 inc GST

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your...

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy way to swap out micro:bits for programming, while still providing reliable connections to all of their different pins! Documents: Datasheet ...

Availability: Back Order
Item #: PRT-17253 -

micro:bit Edge Connector - SMD, Right Angle (40-pin)

Price: $5.16 inc GST

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your...

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy way to swap out micro:bits for programming, while still providing reliable connections to all of their different pins! Documents: Datasheet ...

Availability: Back Order
Item #: COM-17263 -

Thumb Joystick Knob - Deluxe

Price: $2.24 inc GST

This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick. ...

This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick.

Availability: Out of Stock
Item #: DEV-17284 -

Raspberry Pi Compute Module 4 8GB - 2GB RAM

Price: $78.24 inc GST

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on...

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of the board. But true to the line, the Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded or OEM applications. The board includes the same 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU on the Raspberry Pi 4 and is capable...

Availability: Out of Stock
Item #: DEV-17287 -

micro:bit v2 Board

Price: $35.65 inc GST

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your...

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a credit card, you will be surprised at the amount of hardware each board is equipped with, including 25 red LED lights that can flash messages. There are...

Availability: Out of Stock
Item #: DEV-17288 -

micro:bit v2 Go Bundle

Price: $41.35 inc GST

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your...

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a credit card, you will be surprised at the amount of hardware each board is equipped with, including 25 red LED lights that can flash messages. There are...

Availability: Out of Stock
Item #: KIT-17290 -

micro:bit v2 Club Kit - Go Bundle 10-Pack

Price: $386.78 inc GST

This micro:bit v2 Club Kit contains ten, count em', ten micro:bit v2 Go Bundles that provides you with everything you need to get hooked up and powered. This kit includes the micro:bit v2, a short...

This micro:bit v2 Club Kit contains ten, count em', ten micro:bit v2 Go Bundles that provides you with everything you need to get hooked up and powered. This kit includes the micro:bit v2, a short USB cable, a AAA battery holder and AAA batteries. Also inside the Go Bundle you will find a Quick Start Guide with four unique ideas to get you started with micro:bit! The Go Bundle is a quick and economical way to get started with the micro:bit. So gather up your crew, give your club a cool name &...

Availability: Back Order
Item #: DEV-17360 -

Raspberry Pi Compute Module 4 I/O Board

Price: $78.24 inc GST

The Raspberry Pi Compute Module 4 I/O board is the perfect compliment to get you started working the Compute Module 4 line. The Compute Module plugs right into the I/O Board and provides a multitude...

The Raspberry Pi Compute Module 4 I/O board is the perfect compliment to get you started working the Compute Module 4 line. The Compute Module plugs right into the I/O Board and provides a multitude of inputs and outputs for prototyping or evaluation needs. The board includes 5v and 12v power connectors and 2 USB 2.0 connectors along with headers for two additional connectors. 2 HDMI full sized HDMI connectors and 2 MIPI DSI display FPC connectors provide support for displays along with 2 MIPI...

Availability: Out of Stock
Item #: LAB-17361 -

SparkFun Educator Lab Pack for micro:bit v2

Price: $644.70 inc GST

The micro:bit v2 Educator's Lab Pack includes 10 micro:bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including...

The micro:bit v2 Educator's Lab Pack includes 10 micro:bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including micro:bits, cables, battery packs and a few parts to experiment with. This package provides an easy way to introduce your students to the micro:bit without any difficulty or parts hunting. SparkFun packages everything educators need to get started with the micro:bit in a variety of classroom settings and...

Availability: Out of Stock
Item #: KIT-17362 -

SparkFun Inventor's Kit for micro:bit v2

Price: $91.65 inc GST

The SparkFun Inventor’s Kit (SIK) for micro:bit v2 is a great way to get creative, connected and coding with the micro:bit. The SIK for micro:bit v2 provides not only the micro:bit v2 board but...

The SparkFun Inventor’s Kit (SIK) for micro:bit v2 is a great way to get creative, connected and coding with the micro:bit. The SIK for micro:bit v2 provides not only the micro:bit v2 board but everything you need to hook up and experiment with multiple electronic circuits! With the SIK for micro:bit v2 you will be able to complete circuits that will teach you how to read sensors, move motors, build Bluetooth® devices and more. The SparkFun Inventor’s Kit for micro:bit is the latest and...

Availability: Out of Stock
Item #: LAB-17363 -

SparkFun Inventor's Kit for micro:bit v2 Lab Pack

Price: $949.16 inc GST

The SparkFun Inventor's Kit for micro:bit v2 Lab Pack includes 10 complete micro:bit v2 Inventor's Kits, an SIK Refill Pack and 25 AAA-sized batteries to get your students started in the world of...

The SparkFun Inventor's Kit for micro:bit v2 Lab Pack includes 10 complete micro:bit v2 Inventor's Kits, an SIK Refill Pack and 25 AAA-sized batteries to get your students started in the world of electronics. The SIKs inside the Lab Pack have everything you need, including micro:bit v2s, connector breakouts, breadboards and all the cables and accessories to hook up all the projects listed in our online Experiment Guide. The kit does not require any soldering and is recommended for all users,...

Availability: Out of Stock
Item #: DEV-17384 -

Raspberry Pi Compute Module 4 Lite (Wireless Version) - 2GB RAM

Price: $78.24 inc GST

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on...

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of the board. But true to the line, the Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded or OEM applications. The board includes the same 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU on the Raspberry Pi 4 and is capable...

Availability: Back Order
Item #: WRL-17389 -

Raspberry Pi 4 Compute Module Antenna Kit

Price: $11.18 inc GST

This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The “duck” style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite...

This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The “duck” style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you’re working in industrial environments or other places a Compute Module would be used and the potential for signal interference is present. The antenna connects to the board via the press-fit U.FL connector on board the compute module (see photos for more details). This kit contains an...

Availability: Out of Stock
Item #: DEV-17392 -

Raspberry Pi Compute Module 4 32GB (Wireless Version) - 4GB RAM

Price: $145.30 inc GST

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on...

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of the board. But true to the line, the Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded or OEM applications. The board includes the same 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU on the Raspberry Pi 4 and is capable...