Bambu Lab A1 Mini 3D Printer

Name: Bambu Lab A1 Mini 3D Printer
Brand: Bambu Lab
SKU: BAM-PF002-M-AU
Price: 349.00 NZD
Availability: InStock

Item #: BAM-PF002-M-AU

1 review(s).

Price: $349.00 inc GST

Retail Price: ##RETAILPRICE## inc GST

Was $389.00

Points to Purchase:2327

You Save: $40.00 (10.3%)

notify me

Quantity:

About This Item

Fully assembled: unbox and print in about 15 minutes
Full auto calibration and active flow rate compensation for reliable first layers
Up to 500 mm/s and 10,000 mm/s² with full-metal linear rails
Under 48 dB in silent mode with active motor noise cancelling
Tool-free quick swap nozzle, runout and tangle sensors, camera
180 × 180 × 180 mm build volume; AMS lite ready for four colours

Overview

Bambu Lab A-Series

Bambu Lab A1 Mini 3D Printer

Big Bambu Lab performance in a compact, quiet, fully assembled printer. Auto calibration, active flow control and 500 mm/s speed make great prints easy from day one. Add an AMS lite later when you are ready for four-colour printing.

180×180×180Build volume (mm)

500 mm/sMax speed

<48 dBSilent mode

~15 minUnbox to print

Bambu Lab A1 Mini compact 3D printer New Zealand

Ready in minutes

Out of the Box and Printing in About 15 Minutes

The A1 Mini arrives fully assembled and factory tuned. Unpack it, fit the spool holder and purge wiper, connect to Wi-Fi and it is ready. There is no frame to build and no belts to tension, which makes it a great first printer for home, school or the office.

Bambu Lab A1 Mini 3D printer arrives pre-assembled in the box ready to print

Full auto calibration

No Manual Levelling. Ever.

Before every print the A1 Mini automatically calibrates Z-offset, bed levelling, vibration resonance and nozzle pressure. You get a clean first layer without fiddling with paper and knobs, so more prints succeed first time.

Bambu Lab A1 Mini full auto calibration of Z offset and bed level on the textured PEI plate

Active flow rate compensation

Smooth, Accurate Extrusion at Every Corner

An eddy current sensor in the toolhead measures nozzle pressure and works out the flow calibration automatically. Bambu Lab's Active Flow Rate Compensation then adjusts extrusion in real time, so corners stay crisp and walls stay even, even at speed.

Bambu Lab A1 Mini active flow rate compensation on and off print comparison

High-speed precision

Fast Prints That Still Look Great

Full-metal linear rails, a rigid frame, accelerometers and Bambu Lab's motion control let the A1 Mini reach 500 mm/s toolhead speed and 10,000 mm/s² acceleration. A speed Benchy takes about 14 minutes, with detail fine enough to print parts that click into real LEGO® bricks.

Bambu Lab A1 Mini prints a 3D Benchy in 14 minutes

Under 48 dB

Quiet Enough for the Lounge or Classroom

Active Motor Noise Cancelling tunes each motor individually, and silent mode brings the A1 Mini down to under 48 dB. Print in a shared space without the usual 3D printer whine.

Bambu Lab A1 Mini silent mode measured under 48 dB with active motor noise cancelling

Comprehensive monitoring

Sensors That Catch Problems Early

Filament runout and tangle sensors, a nozzle pressure sensor and two filament odometers work together to spot runouts, tangles and air printing. Power loss recovery resumes a job after an outage, and the built-in camera lets you check progress and record timelapses.

Bambu Lab A1 Mini toolhead with filament runout tangle and nozzle pressure sensors

Quick swap nozzle

Change Nozzles in Seconds, No Tools

The hotend pops in and out with a single clip. Swap between 0.2, 0.4, 0.6 and 0.8 mm nozzles for fine detail or fast draft prints, and service the printer yourself in minutes.

Bambu Lab A1 Mini quick swap nozzle changed by hand with one clip

Bambu Studio, Bambu Handy and MakerWorld

Print From Your Phone or Computer

Slice in Bambu Studio on Windows or macOS, or send ready-made models from MakerWorld with one click in the Bambu Handy app. Monitor prints remotely over Wi-Fi from anywhere.

Bambu Studio slicer and Bambu Handy app controlling the Bambu Lab A1 Mini

Ready for Colour When You Are

The A1 Mini is AMS lite ready. Add a Bambu Lab AMS lite to unlock four-colour printing, or save by choosing the A1 Mini Combo, which includes the AMS lite in the box.

Multi-colour topographic map printed on a Bambu Lab A1 Mini with AMS lite

Why Buy From MindKits

Official Bambu Lab distributor for New Zealand with NZ stock and nationwide shipping
Local NZ support for setup questions, warranty and spare parts
Everything you need in one place including Bambu Lab filament, nozzles, build plates and spare parts

Technical Specifications

Build volume	180 × 180 × 180 mm
Chassis	Steel and extruded aluminium
Motion system	Bed slinger with full-metal linear rails
Max toolhead speed	500 mm/s
Max toolhead acceleration	10 m/s²
Max hot end flow	28 mm³/s (Bambu ABS, 280 °C, 150 × 150 mm single wall test model)
Hot end	All-metal, quick swap
Extruder gears	Hardened steel
Nozzle	Stainless steel
Max hot end temperature	300 °C
Nozzle diameter	0.4 mm included; 0.2, 0.6 and 0.8 mm optional
Filament cutter	Yes
Filament diameter	1.75 mm
Max build plate temperature	80 °C
Compatible build plates	Bambu Textured PEI Plate (included), Bambu Smooth PEI Plate
Ideal filaments	PLA, PETG, TPU, PVA
Not recommended	ABS, ASA, PC, PA, PET, carbon or glass fibre reinforced filaments
Sensors	Low-rate monitoring camera (up to 1080p, timelapse), filament runout sensor, filament tangle sensor, filament odometry, power loss recovery
Cooling	Closed-loop part cooling, hot end and mainboard fans
Display	2.4 inch 320 × 240 IPS touch screen
Connectivity	Wi-Fi (IEEE 802.11 b/g/n), Bambu-Bus
Storage	MicroSD card
Control	Touch screen, Bambu Handy app, Bambu Studio
Motion controller	Dual-core Cortex-M4
Slicer	Bambu Studio (Windows, macOS). Third-party slicers exporting standard G-code, such as PrusaSlicer, SuperSlicer and Cura, also work, but some advanced features may not be supported
Noise	Under 48 dB in silent mode
Printer dimensions	347 × 315 × 365 mm
Net weight	5.5 kg
Power	100–240 VAC, 50/60 Hz, 150 W max
AMS compatibility	AMS lite (one per printer)

Compare and FAQs

Which A1 Printer Is Right for You?

Model	Build volume	Colour	Best for
A1 Mini (this product)	180 × 180 × 180 mm	Single colour, AMS lite ready	First printer, small parts, gifts, classrooms
A1 Mini Combo	180 × 180 × 180 mm	4 colours (AMS lite included)	Colourful models, figurines, signs and gifts
A1	256 × 256 × 256 mm	Single colour, AMS lite ready	Bigger parts on a budget
A1 Combo	256 × 256 × 256 mm	4 colours (AMS lite included)	Bigger multi-colour prints

Common Questions

Is 180 mm big enough? For most hobby, home and classroom projects, yes. Larger designs can be split into parts and joined, which also wastes less filament if a print fails. If you regularly print bigger parts, look at the A1.
What filament should I use? PLA and PETG are ideal and cover most projects. TPU and PVA also work. Shop 1.75 mm filament.
Can I add colour later? Yes. The A1 Mini works with the AMS lite, but buying the Combo is the better-value way to get it.
Does it need an enclosure? No. The A1 Mini is an open-frame printer designed for PLA, PETG and TPU. For ABS, ASA or engineering filaments, an enclosed Bambu Lab P or X series printer is the better choice.

Videos and Resources

A1 Mini official video Bambu Lab's introduction to the A1 Mini
Bambu Lab A1 Mini Wiki Setup, maintenance, troubleshooting and nozzle swap guides
Bambu Studio Free slicer for Windows and macOS
MakerWorld Thousands of ready-to-print models with one-click printing from Bambu Handy

What's in the Box

Bambu Lab A1 Mini 3D printer
Bambu Textured PEI build plate
Spool holder
Purge wiper
520 mm PTFE tube
Sample filament
Accessory box
Quick start guide

Contents can change when Bambu Lab updates the kit. Filament spools shown in some photos are sold separately.

Reviews

Dazz Marshall

A magnificent first 3d printer

This little 3d printer was absolutely no effort to get going. Straight out of the box, I had it assembled, auto-calibrated, and printing inside of half an hour.

The fact that it connects through wifi, means you can print straight from any device with the bambu labs app. I went the other route, as i don't have a smart phone right now, and it works just as well.

I would strongly recommend this printer to anyone starting out 3d-printing. The issues you hear about with 3d-printers appear be absent with from the A1-mini, as it does most of the tricky stuff itself.

Support videos on Youtube and Bambu Labs are excellent, and the bambu studio slicer is incredibly easy to use. Also, wow is it fast.

Worth every scent.