BlazeCut T-Series T300E Automatic Fire Suppression System

Where the T300E fits

This model is commonly considered for large equipment cabinets, machinery spaces and enclosed vehicle or marine engine compartments. Suitability depends on the measured internal volume, enclosure ventilation, ambient temperature and installation layout.

• Electrical application maximum at 20°C: 1.37 m³
• Engine application maximum at 20°C: 1.04 m³
• System length: 319 cm
• Agent amount: 0.75 kg

Supplier sizing limits are calculated at 20°C using 7% design concentration for electrical applications and 9% for engine applications. Lower temperatures reduce coverage potential. The T-Series is intended for enclosed or minimally ventilated spaces and is not suitable for open areas. Confirm unusual, highly ventilated, safety-critical or compliance-led installations before purchase.

Sizing and Selection

Measure internal width × height × depth to calculate enclosure volume, then compare the electrical or engine maximums below. For a guided result, use the BlazeCut size calculator. The enclosure must be enclosed or minimally ventilated; the T-Series is not suitable for open areas.

*Letter “S” in model designation stands for an integrated pressure switch that allows connection of a signaling device of to perform a shutdown operation at time of agent discharge. TxxxE does not require power.

** Calculated design concentration 7% (Electrical Fires) and 9% (Engine Fires) and an ambient temperature of 20°C (68°F) for the enclosure. Please note if a lower temperature is present the coverage potential will be reduced, please contact your local BlazeCut agent for further information.

• 1 × BlazeCut T-Series automatic fire suppression system
• Nylon straps
• Stickers