BlazeCut T-Series T400E Automatic Fire Suppression System

Where the T400E fits

This model is commonly considered for the largest enclosed electrical, machinery, vehicle and marine spaces covered by the MindKits T-Series range. Suitability depends on the measured internal volume, enclosure ventilation, ambient temperature and installation layout.

• Electrical application maximum at 20°C: 1.82 m³
• Engine application maximum at 20°C: 1.39 m³
• System length: 422 cm
• Agent amount: 1.00 kg

Supplier sizing limits are calculated at 20°C using 7% design concentration for electrical applications and 9% for engine applications. Lower temperatures reduce coverage potential. The T-Series is intended for enclosed or minimally ventilated spaces and is not suitable for open areas. Confirm unusual, highly ventilated, safety-critical or compliance-led installations before purchase.

Sizing and Selection

Measure internal width × height × depth to calculate enclosure volume, then compare the electrical or engine maximums below. For a guided result, use the BlazeCut size calculator. The enclosure must be enclosed or minimally ventilated; the T-Series is not suitable for open areas.

*Letter “S” in model designation stands for an integrated pressure switch that allows connection of a signaling device of to perform a shutdown operation at time of agent discharge. TxxxE does not require power.

** Calculated design concentration 7% (Electrical Fires) and 9% (Engine Fires) and an ambient temperature of 20°C (68°F) for the enclosure. Please note if a lower temperature is present the coverage potential will be reduced, please contact your local BlazeCut agent for further information.

• 1 × BlazeCut T-Series automatic fire suppression system
• Nylon straps
• Stickers